For VW Tiguan 2 Ad Car Radio Adapter Fibre Optics Most Bus Adapter Dynaudio

Description: Important note for customers outside the EU!Any applicable import duties, taxes and feesare not in the item price or den Shipping costs included.The buyer is responsible for this responsible for fees. plug & playFiber optic / MOST adapterforSkoda and Volkswagenwith Canton or Dynaudio sound systemIf you have an amplifier in your vehicle ex workshave installed which is controlled via fiber optic cable,so you can connect it to an aftermarket radio with the adapterconnect.To do this, the front loudspeaker outputs are converted into aFiber optic signal converted and forwarded to the amplifiergiven.On the adapter itself, all you have to do is keep Ground and ignition plus (alternatively the remote line of the retrofit radio).Important instructions!1. The fader function (fade from front to rear speakers) works with the Unfortunately no more adapters.The balance control (left/right) works furthermore.2. Check before buying whether the original amplifierturns on. Because in some vehicles switchesthis only via Can-Bus signals and not with onenormal remote line.In this case you also need a CAN busAdapter that switches on the amplifier.We also have this in our range for 79 euros. Visit my ebay shop: acr-hofIf you have any questions about the producthave, so write us an Ebay messageor use the phone number orEmail address below in the"Seller's Legal Information"> "complete information"You can reach us at the following times:Tuesday - Friday 10.00 a.m. - 6.00 p.mSaturdays 10 a.m. - 2 p.mDISCONTINUED WITHImportant note for customers outside the EU! Any applicable import duties, taxes and fees are not in the item price or den Shipping costs included. The buyer is responsible for this responsible for fees. If you have an amplifier in your vehicle ex works have installed which is controlled via fiber optic cable, so you can connect it to an aftermarket radio with the adapter To do this, the front loudspeaker outputs are converted into a Fiber optic signal converted and forwarded to the amplifier On the adapter itself, all you have to do is keep Ground and ignition plus (alternatively the remote line The balance control (left/right) works furthermore. 2. Check before buying whether the original amplifier this only via Can-Bus signals and not with one We also have this in our range for 79 euros

Price: 401.2 USD

Location: Hof

End Time: 2023-11-11T08:48:44.000Z

Shipping Cost: 0 USD