FormFutura ApolloX Enhanced ASA 1.75mm Filament

Description: ApolloX is a modified ASA based 3D printer filament with improved mechanical properties and is suitable for 3D printing mechanical parts and outdoor applications with high precision and low warping. With high speed 3D printing becoming more prominent due to the introduction of high speed 3D printers, FormFutura is excited to introduce a range of new and existing upgraded materials to our assortment. These materials, while still suitable for traditional printers, have also been fully optimized for the new high speed 3D printing technology. ApolloX is UV- and weather resistant and thus great for outdoor and automotive applications. It combines a high heat resistance with a superb impact strength.ApolloX is an industrial-grade ASA filament enhanced with five other polymers and modifiers. The material prints with a precision comparable with injection molding. It exhibits a perfect first- and interlayer adhesion and 3D prints without warping. For larger objects, we recommend printing in a heated chamber.ApolloX profiles are available on the Ultimaker Marketplace. ApolloX is an approved and validated partner material. Unique featuresUV & weather resistantFDM/FFF-optimizedWarp-free printingOptimized filament flowing behaviour, thermal stability, and inter-layer adhesionExcellent adhesion to heated glass plate, Kapton tape, PET tape and Formfutura EasyPadGreatly improved mechanical properties and strengthExtremely high printing precisionPrinting with remarkable fine detail General printing guidelines *Nozzle size: ≥ 0.15mmLayer height: ≥ 0.1mmAdhesive: EasyFix Nr. IPrint temp: ± 230 – 280° C *Fan speed: 0 – 50%Experience level: IntermediateHeat bed: ± 90 – 110° C *Enclosure: Yes, 40° C *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.*)When using high speed printing, the above displayed settings will likely need to be adjusted accordingly.Strong adhesionApolloX is an engineering-grade material. It is recommended to use an adhesive on your build plate as a protective layer. We recommend to use EasyFix Nr. I as buildplate adhesive. For large(r) prints we recommend to 3D print in a heated chamber.

Price: 32 USD

Location: Philadelphia, Pennsylvania

End Time: 2025-01-25T22:46:28.000Z

Shipping Cost: N/A USD