Revere

Galaxy Dust Matte Magic Purple Metallic Sticker Decal Vinyl Wrap Sheet Film DIY

Description: Galaxy Dust Matte Magic Purple Metallic Sticker Decal Vinyl Wrap Sheet Film DIY Item Specification: Thickness of film (C=10 micron): 15C±0.5C Thickness of film with release liner: 31C±0.5C Type of film: Hybrid vinyl film with air channels (Designed for vehicle exterior with prefect paint condition) Glue: Solvent based adhesive, odor: solvent odor (Low-Medium Tack - Easy to reposition)   Release liner: White silicone-coated paper with double-sided polyethylene coating, small square air release channels, origin Germany Storing period: 2 years if stored in +10°С to +20°С for optimal quality, relative humidity 50%, in original package, away from direct sun light, clean and dry place Indoor life: 4 years when followed rules of application and use Outdoor life: 3 years when followed rules of application and use Application: from +10°С to +20°С, usage from -30°С to +30°С Dimensional stability: shrinkage less than 5% Plastification: between 27%-35% Breaking Strength: 22.7 N/10mm (Average) Test Method: ASTM D3759/D3759M-057.4 N/10mm (Average) Test Method: ASTM D3330/D3330-04 Light Ageing in UV Exposure:  Test Method: ASTM D4329-13 Cycle A & ISO 105-A02:1993/Cor.2:2005 Test result: 4-5 Exposure cycle: ASTM D4329-13 cycle A Lamp type: UVA-3408h UV at (60±2.5)℃ BPT, 0.89 W/ (m2•nm)@340nm, 5h condensation at (50±2.5)℃ BPT, Exposure Duration: 52h   Description: Water resistant and weather proof. Flexible and Stretchable for concave area. Low cost to change the look of your vehicles. Easy installation with dry application method. Heat gun or household blow dryer for shaping is required. Low - medium tack self adhesive (Easy to Reposition) Easy to fit in most tight spots or corners (3M primer 94 is required for non sticky surfaces, curves & corners) Material has no warranty for fading. Fluorescent Neon colors tend to fade faster than normal colors. Fading can be reduced with over lamination, preventing stretched areas, which fade even faster, and shelter from high U.V. times during the day. Material is specially made for vehicle exterior paint surface in good condition. Buyers take self responsibility on unsuccessful result on other usage. Always pre-test vinyl installation on vehicles. Due to different monitors/calibrations, colors may vary slightly from the pictures. Film colors can vary slightly from roll to roll. For the most consistency, please purchase a full roll. For best result, professional installation is required; Buyers take responsibility on physical damage during installation such as over heating, over stretching, ripping. This vinyl is designed for vehicle exterior wrap use ONLY. This vinyl won't stick good on polyethylene, polypropylene, ABS, PET/PBT blends, concrete, wood, glass, plastic, textured, aluminum, metal. Installers must use primer 94 for additional adhesion. This vinyl is not originally designed for plotter or cutter use. Buyer is responsible for all of the wrinkles & creases issue if using on a plotter or cutter. PaymentShippingReturnsPaymentShippingReturns We accept payment by any of the following methods: PayPal  Please pay as soon as possible after winning an auction, as that will allow us to post your item to you sooner! We offer FREE shipping on all orders! Your order will be dispatched within 1 working day of receiving payment (Monday-Friday) and you should expect to receive it one or two days after dispatch (for orders sent RM 1st Class). In the very unlikely event that your item is lost or damaged during post, then WE are responsible and will issue either a full refund or replacement. If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one, be it similar or not. You can return a product for up to 14 days from the date you purchased it. Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt.Item Specification: ---Thickness of film (C=10 micron): 15C±0.5C ---Thickness of film with release liner: 31C±0.5C ---Type of film: Hybrid vinyl film with air channels (Designed for vehicle exterior with prefect paint condition) ---Glue: Solvent based adhesive, odor: solvent odor (Low-Medium Tack - Easy to reposition) ---Release liner: White silicone-coated paper with double-sided polyethylene coating, small square air release channels, origin Germany ---Storing period: 2 years if stored in +10°С to +20°С for optimal quality, relative humidity 50%, in original package, away from direct sun light, clean and dry place ---Indoor life: 4 years when followed rules of application and use ---Outdoor life: 3 years when followed rules of application and use ---Application: from +10°С to +20°С, usage from -30°С to +30°С ---Dimensional stability: shrinkage less than 5% ---Plastification: between 27%-35% ---Breaking Strength: 22.7 N/10mm (Average) ---Test Method: ASTM D3759/D3759M-057.4 N/10mm (Average) ---Test Method: ASTM D3330/D3330-04 ---Light Ageing in UV Exposure: ---Test Method: ASTM D4329-13 Cycle A & ISO 105-A02:1993/Cor.2:2005 ---Test result: 4-5 ---Exposure cycle: ASTM D4329-13 cycle A ---Lamp type: UVA-3408h UV at (60±2.5)℃ BPT, 0.89 W/ (m2•nm)@340nm, 5h condensation at (50±2.5)℃ BPT, Exposure ---Duration: 52h Description: ---Water resistant and weather proof. ---Flexible and Stretchable for concave area. ---Low cost to change the look of your vehicles. ---Easy installation with dry application method. ---Heat gun or household blow dryer for shaping is required. ---Low - medium tack self adhesive (Easy to Reposition) ---Easy to fit in most tight spots or corners (3M primer 94 is required for non sticky surfaces, curves & corners) ---Material has no warranty for fading. Fluorescent Neon colors tend to fade faster than normal colors. Fading can be reduced with over lamination, preventing stretched areas, which fade even faster, and shelter from high U.V. times during the day. ---Material is specially made for vehicle exterior paint surface in good condition. Buyers take self responsibility on unsuccessful result on other usage. ---Always pre-test vinyl installation on vehicles. ---Due to different monitors/calibrations, colors may vary slightly from the pictures. ---Film colors can vary slightly from roll to roll. For the most consistency, please purchase a full roll. ---For best result, professional installation is required; Buyers take responsibility on physical damage during installation such as over heating, over stretching, ripping. ---This vinyl is designed for vehicle exterior wrap use ONLY. This vinyl won't stick good on polyethylene, polypropylene, ABS, PET/PBT blends, concrete, wood, glass, plastic, textured, aluminum, metal. Installers must use primer 94 for additional adhesion. This vinyl is not originally designed for plotter or cutter use. Buyer is responsible for all of the wrinkles & creases issue if using on a plotter or cutter. Galaxy Dust Matte Magic Purple Metallic Sticker Decal Vinyl Wrap Sheet Film DIY Item Specification: Thickness of film (C=10 micron): 15C±0.5C Thickness of film with release liner: 31C±0.5C Type of film: Hybrid vinyl film with air channels (Designed for vehicle exterior with prefect paint condition) Glue: Solvent based adhesive, odor: solvent odor (Low-Medium Tack - Easy to reposition)   Release liner: White silicone-coated paper with double-sided polyethylene coating, small square air release channels, origin Germany Storing period: 2 years if stored in +10°С to +20°С for optimal quality, relative humidity 50%, in original package, away from direct sun light, clean and dry place Indoor life: 4 years when followed rules of application and use Outdoor life: 3 years when followed rules of application and use Application: from +10°С to +20°С, usage from -30°С to +30°С Dimensional stability: shrinkage less than 5% Plastification: between 27%-35% Breaking Strength: 22.7 N/10mm (Average) Test Method: ASTM D3759/D3759M-057.4 N/10mm (Average) Test Method: ASTM D3330/D3330-04 Light Ageing in UV Exposure:  Test Method: ASTM D4329-13 Cycle A & ISO 105-A02:1993/Cor.2:2005 Test result: 4-5 Exposure cycle: ASTM D4329-13 cycle A Lamp type: UVA-3408h UV at (60±2.5)℃ BPT, 0.89 W/ (m2•nm)@340nm, 5h condensation at (50±2.5)℃ BPT, Exposure Duration: 52h   Description: Water resistant and weather proof. Flexible and Stretchable for concave area. Low cost to change the look of your vehicles. Easy installation with dry application method. Heat gun or household blow dryer for shaping is required. Low - medium tack self adhesive (Easy to Reposition) Easy to fit in most tight spots or corners (3M primer 94 is required for non sticky surfaces, curves & corners) Material has no warranty for fading. Fluorescent Neon colors tend to fade faster than normal colors. Fading can be reduced with over lamination, preventing stretched areas, which fade even faster, and shelter from high U.V. times during the day. Material is specially made for vehicle exterior paint surface in good condition. Buyers take self responsibility on unsuccessful result on other usage. Always pre-test vinyl installation on vehicles. Due to different monitors/calibrations, colors may vary slightly from the pictures. Film colors can vary slightly from roll to roll. For the most consistency, please purchase a full roll. For best result, professional installation is required; Buyers take responsibility on physical damage during installation such as over heating, over stretching, ripping. This vinyl is designed for vehicle exterior wrap use ONLY. This vinyl won't stick good on polyethylene, polypropylene, ABS, PET/PBT blends, concrete, wood, glass, plastic, textured, aluminum, metal. Installers must use primer 94 for additional adhesion. This vinyl is not originally designed for plotter or cutter use. Buyer is responsible for all of the wrinkles & creases issue if using on a plotter or cutter. Payment We accept payment by any of the following methods: PayPal  Please pay as soon as possible after winning an auction, as that will allow us to post your item to you sooner!Shipping We offer FREE shipping on all orders! Your order will be dispatched within 1 working day of receiving payment (Monday-Friday) and you should expect to receive it one or two days after dispatch (for orders sent RM 1st Class). In the very unlikely event that your item is lost or damaged during post, then WE are responsible and will issue either a full refund or replacement.Returns If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one, be it similar or not. You can return a product for up to 14 days from the date you purchased it. Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt. Item Specification: Thickness of film (C=10 micron): 15C±0.5C Thickness of film with release liner: 31C±0.5C Type of film: Hybrid vinyl film with air channels (Designed for vehicle exterior with prefect paint condition) Glue: Solvent based adhesive, odor: solvent odor (Low-Medium Tack - Easy to reposition)   Release liner: White silicone-coated paper with double-sided polyethylene coating, small square air release channels, origin Germany Storing period: 2 years if stored in +10°С to +20°С for optimal quality, relative humidity 50%, in original package, away from direct sun light, clean and dry place Indoor life: 4 years when followed rules of application and use Outdoor life: 3 years when followed rules of application and use Application: from +10°С to +20°С, usage from -30°С to +30°С Dimensional stability: shrinkage less than 5% Plastification: between 27%-35% Breaking Strength: 22.7 N/10mm (Average) Test Method: ASTM D3759/D3759M-057.4 N/10mm (Average) Test Method: ASTM D3330/D3330-04 Light Ageing in UV Exposure:  Test Method: ASTM D4329-13 Cycle A & ISO 105-A02:1993/Cor.2:2005 Test result: 4-5 Exposure cycle: ASTM D4329-13 cycle A Lamp type: UVA-3408h UV at (60±2.5)℃ BPT, 0.89 W/ (m2•nm)@340nm, 5h condensation at (50±2.5)℃ BPT, Exposure Duration: 52h   Description: Water resistant and weather proof. Flexible and Stretchable for concave area. Low cost to change the look of your vehicles. Easy installation with dry application method. Heat gun or household blow dryer for shaping is required. Low - medium tack self adhesive (Easy to Reposition) Easy to fit in most tight spots or corners (3M primer 94 is required for non sticky surfaces, curves & corners) Material has no warranty for fading. Fluorescent Neon colors tend to fade faster than normal colors. Fading can be reduced with over lamination, preventing stretched areas, which fade even faster, and shelter from high U.V. times during the day. Material is specially made for vehicle exterior paint surface in good condition. Buyers take self responsibility on unsuccessful result on other usage. Always pre-test vinyl installation on vehicles. Due to different monitors/calibrations, colors may vary slightly from the pictures. Film colors can vary slightly from roll to roll. For the most consistency, please purchase a full roll. For best result, professional installation is required; Buyers take responsibility on physical damage during installation such as over heating, over stretching, ripping. This vinyl is designed for vehicle exterior wrap use ONLY. This vinyl won't stick good on polyethylene, polypropylene, ABS, PET/PBT blends, concrete, wood, glass, plastic, textured, aluminum, metal. Installers must use primer 94 for additional adhesion. This vinyl is not originally designed for plotter or cutter use. Buyer is responsible for all of the wrinkles & creases issue if using on a plotter or cutter.

Price: 16.95 USD

Location: Des Plaines, Illinois

End Time: 2024-11-28T04:27:29.000Z

Shipping Cost: 0 USD

Product Images

Galaxy Dust Matte Magic Purple Metallic Sticker Decal Vinyl Wrap Sheet Film DIYGalaxy Dust Matte Magic Purple Metallic Sticker Decal Vinyl Wrap Sheet Film DIYGalaxy Dust Matte Magic Purple Metallic Sticker Decal Vinyl Wrap Sheet Film DIY

Item Specifics

Return shipping will be paid by: Seller

Returns Accepted: Returns Accepted

Item must be returned within: 30 Days

Refund will be given as: Money back or replacement (buyer's choice)

Theme: Galaxy Dust Matte Chameleon Metallic Glitter Sparkle

Type: Vinyl Wrap

Features: Bubble Free Air Release Channel

Color: Diamond Purple Bronze

Manufacturer Part Number: GDM-PURPLE BRONZE-663

Finish: Color Shift Flow Change Chameleon

UPC: Does not apply

EAN: Does not apply

Placement on Vehicle-recover: Left Right Front Rear Upper Lower

Fit for: Auto Car Boat Bike Motorcycle Plane

Work For: Spoiler Bumper Roof Hood

Adhesive Type: Low - Medium Tack

Thickness: 3Mil

Basic Wrapping Tool Kit: Felt Squeegee / Utility Knife

Brand: BESTech

Deluxe Wrapping Tool Kit: Squeegee / Knife / Glove / Pry Tool / Adhesion Promoter

Available Variations

Color: 12" x 60" (1ft x 5ft)

Price: 16.95 USD

Available Quantity: 50

Quantity Sold: 6

Color: 24" x 60" (2ft x 5ft)

Price: 28.95 USD

Available Quantity: 50

Quantity Sold: 3

Color: 36" x 60" (3ft x 5ft)

Price: 42.95 USD

Available Quantity: 50

Quantity Sold: 0

Color: 48" x 60" (4ft x 5ft)

Price: 54.95 USD

Available Quantity: 50

Quantity Sold: 2

Color: 60" x 60" (5ft x 5ft)

Price: 64.95 USD

Available Quantity: 52

Quantity Sold: 2

Color: 72" x 60" (6ft x 5ft)

Price: 74.95 USD

Available Quantity: 51

Quantity Sold: 1

Color: 84" x 60" (7ft x 5ft)

Price: 84.95 USD

Available Quantity: 50

Quantity Sold: 0

Color: 96" x 60" (8ft x 5ft)

Price: 94.95 USD

Available Quantity: 50

Quantity Sold: 0

Color: 108" x 60" (9ft x 5ft)

Price: 104.95 USD

Available Quantity: 50

Quantity Sold: 0

Color: 120" x 60" (10ft x 5ft)

Price: 114.95 USD

Available Quantity: 50

Quantity Sold: 0

Color: 180" x 60" (15ft x 5ft)

Price: 169.95 USD

Available Quantity: 52

Quantity Sold: 2

Color: Complete Roll (55ft x 5ft)

Price: 599.95 USD

Available Quantity: 51

Quantity Sold: 1

Recommended

Bestech Knives Swordfish Liner Folding Knife 4" D2 tool Steel Blade G10 Handle
Bestech Knives Swordfish Liner Folding Knife 4" D2 tool Steel Blade G10 Handle

$52.00

View Details
Bestech Knives Supersonic Folding Knife 3.5" S35VN Steel Blade Titanium Handle
Bestech Knives Supersonic Folding Knife 3.5" S35VN Steel Blade Titanium Handle

$136.09

View Details
Bestech Knife Fractal Grey Titanium / Carbon Fiber BT1907A
Bestech Knife Fractal Grey Titanium / Carbon Fiber BT1907A

$271.03

View Details
Bestech Knives Dundee Liner Folding Knife 3.5" D2 Tool Steel Blade G10 Handle
Bestech Knives Dundee Liner Folding Knife 3.5" D2 Tool Steel Blade G10 Handle

$45.90

View Details
Bestech Komodo Folding Knife Green & Black G10 Handles 3.35" D2 Sheepsfoot Blade
Bestech Komodo Folding Knife Green & Black G10 Handles 3.35" D2 Sheepsfoot Blade

$41.95

View Details
Bestech The Reticulan Folding Knife 2" Damascus Steel Blade Titanium Handle
Bestech The Reticulan Folding Knife 2" Damascus Steel Blade Titanium Handle

$82.79

View Details
Bestech Knives Swordfish Folding Knife 4" Satin 14C28N Steel Blade G10 Handle
Bestech Knives Swordfish Folding Knife 4" Satin 14C28N Steel Blade G10 Handle

$68.00

View Details
Brand New - BESTECH Knives KASTA folding Knife - 154CM Steel Blade-G10 Handle
Brand New - BESTECH Knives KASTA folding Knife - 154CM Steel Blade-G10 Handle

$80.00

View Details
Bestech Knives Velix Folding Knife 3.25" 14C28N Steel Blade Yellow G10 Handle
Bestech Knives Velix Folding Knife 3.25" 14C28N Steel Blade Yellow G10 Handle

$59.90

View Details
Bestech Knives Dundee Liner Folding Knife 3.5" D2 Tool Steel Blade G10 Handle
Bestech Knives Dundee Liner Folding Knife 3.5" D2 Tool Steel Blade G10 Handle

$44.90

View Details