Godspeed MAXX Coilovers Kit For TOYOTA HIGHLANDER FWD (XU30) 2001-07

Description: FOR TOYOTA HIGHLANDER (XU30) 2001-07 MAXX COILOVERS (fWD MODEL ONLY) Compatible With Toyota Highlander FWD (XU30) 2001 2002 2003 2004 2005 2006 2007; Excludes Air SuspensionsFull Length Adjustable, Independent Ride Height And Spring Tension Adjustment; Mono-Tube Shock With 40 Precise Levels of Damping Force Adjustment; Corresponds to Every Driving Scene From the Street To The TrackLarge Capacity 52mm Steel Shock Body With Anti-Corrosion Coating; Aluminum And Steel Hardware Accessories; SAE9252 Steel Performance Springs;Italian IP F.A. Made Shock Oil Provides High Viscosity Index To Withstand Intense Track Usage And Great For Everyday Driving.Shock Absober Can Be Replaced When Worn Out, Replacement Parts Are Avaialble.; Full 1 Year Limited Warranty From Date Of Purchase, Parts OnlyReasonable priced coilover damper kit features precise 40 levels of damping adjustment, 44mm Internal Piston, full length adjustable, and aluminum parts.CALIFORNIA WARNING: Product Contains "Nickle" That Know To Cause Cancer and Reproductive Harm - www.P65Warnings.ca.gov DETAILSThe Godspeed Project MAXX coilover for Toyota Highlander (XU30) FWD 2001-2007 is for the tuners that want a track oriented setup that also provides daily commute comfort. With 40 levels of damping valve adjustment, you can easily adjust from stiff to soft simply by twisting the knob. Featuring mono-tube design with large capacity 52 mm dia. JIS seamless carbon steel shock body filled with IP F.A. 5W damper oil with properly valved 44 mm internal pistons to endurance competitiveness on a track course or daily spirited driving on public road. Cold wound springs are made from high tensile SAE9252 steel to ensure durability. Vehicle ride heights are adjusted with lower brackets to offer maximum shock travel in order to provide comfort compared to lowering springs alone. Mostly billet aluminum hardware accessories are used for its weight saving property in order to reduced overall weight of the coil-over system yet remain durable. All parts are replaceable and most importantly shock absorbers can be rebuild for customization or simply purchase replacement cartridge without spending too much for complete new coil-over system. You will experience quicker response times, improved bump absorption and increase grip to increase the safety when pushing your car to the limit!Features:40 precise levels of damper adjustmentMono-tube Design With Anodized Shock BodyLightweight aluminum shock components and T7075 forged aluminum / carbon steel brackets.52 mm carbon steel shock body with a 44 mm internal piston.Independent ride height and spring pre-load adjustments.Italian IP F.A made shock oil with a high viscosity index.Front camber adjustable plates are included(whereas applicable)Prior to installation, verify all hardware and properly tighten and spring are preload suspension to10 mm.Our technical department is available to answer any other questions.ADDITIONAL INFORMATIONSPECIAL NOTESPrior to installation, verify all hardware and properly tighten and spring preload is set to 5-10mm(1/4-3/8in). Our technical department is available to answer any other questions.DAMPING LEVELS40-LevelHEIGHT ADJUSTMENTYesSPRING RATE(FRONT)10 kg/mm (560 lbs/inch)SPRING RATE(REAR)6 kg/mm (336 lbs/inch)SPRING LENGTH(FRONT)180 mmSPRING LENGTH(REAR)210 mmFRONT TOP MOUNTNo, Reuse FactoryREAR TOP MOUNTNo, Reuse FactorySPRING INNER DIAMETER(FRONT)62 mm (2.44 inch)SPRING INNER DIAMETER(REAR)43-62 mm (1.69-2.44 inch)WARRANTY NOTENo

Price: 891 USD

Location: South El Monte, California

End Time: 2024-08-20T16:36:05.000Z

Shipping Cost: 0 USD