Gtechniq EXOv5 Ultra Durable Hydrophobic Coating 50 ML

Description: Gtechniq EXOv5 Ultra Durable Hydrophobic Coating 50MLWhy Use Gtechniq EXO?Using composite siloxane technology, EXOv5 facilitates the removal of water spots and road grime, offers excellent resistance to all washing chemicals and can help resist micro-scratches. It produces a very shiny, warm and extremely hydrophobic finish.It has a consistent film that is more durable and resistant to road salt and washing chemicals than its predecessors. Application has been improved with only one coat of product required, with a slow flash off time, giving more time to achieve a perfect finish.All of the above, combined with the introduction of a good degree of swirl resistance, means the EXOv5 represents a significant leap forward in Last Surface Protection (LSP) technology.Simple Steps To Help You Achieve The Best Results.EXOv5 can be applied as a stand-alone coating or as a top coat for Gtechniq C1 Crystal Lacquer or Gtechniq Crystal Serum Light (CSL) - we recommend applying C1 or CSL as a base coat for easy to mark and dark paints.If applying on C1, EXOv5 must be applied at least 4 hours, but less than 12 hours, after completing the C1 application.If applying on CSL, EXOv5 must be applied at least 1 hour after applying CSL.Make sure your vehicle is out of direct sunlight but at a temperature above 5 degrees Celsius, is completely dry and will stay dry for at least 12 hours after application.Wipe down all surfaces using Gtechniq Panel Wipe and a Gtechniq MF1 ZeroR Microfiber Buff Cloth (apply the Panel Wipe directly to the cloth, not directly to the panel) - if applying over newly applied C1 or CSL, this step is not necessary.Shake the bottle well and wear gloves.Prime the AP2 Ultra Soft Foam Filled Applicator evenly with a generous amount of product so that the pad is saturated.Apply with the applicator provided in overlapping strokes over an area approximately 2 feet by 2 feet (60cm x 60cm). Wait 1-2 minutes after applying to a panel and buff with an MF1, followed by a second MF1 to remove any burrs, leaving the surface smooth. A single layer of product is enough.Allow coating to cure for at least 12 hours before exposing to moisture.After application, we recommend that you do not wash the car for at least 7 days.Store in a cool, dry place.If opened, use within 3 months, if unopened, use within 12 months. Avoid direct application to plastic trim, rubbers and hard plastic, such as headlights and taillights.Using composite siloxane technology, EXOv5 facilitates the removal of water spots and road grime, offers excellent resistance to all washing chemicals and can help resist micro-scratches. It produces a very shiny, warm and extremely hydrophobic finish. It has a consistent film that is more durable and resistant to road salt and washing chemicals than its predecessors. Application has been improved with only one coat of product required, with a slow flash off time, giving more time to achieve a perfect finish. Apply with the applicator provided in overlapping strokes over an area approximately 2 feet by 2 feet (60cm x 60cm). Wait 1-2 minutes after applying to a panel and buff with an MF1, followed by a second MF1 to remove any burrs, leaving the surface smooth. A single layer of product is

Price: 98.62 USD

Location: Afa

End Time: 2024-12-14T19:00:21.000Z

Shipping Cost: 40.14 USD