Gunnar Rock Hound 15" Small Waterford Mountain Bike Frame Reynolds 853 Steel 26"

Description: Vintage 15" Gunnar Rock Hound Bike Frame Made by Waterford Precision Cycles in Wisconsin, USA Frame is freshly powder coated in black. -Reynolds 853 air hardened steel -Ritchey dropouts. -weighs 3 lbs 15 ozs Condition 1. Powder coat has a few imperfections and scratches from storage. 2. Very small indentation on bottom side of top tube. It's imperceptible unless the light hits it right. Doesn't affect the bike structurally. 3. The frame and threads were prepped for building following the powder coat, although the dropouts and 27.2mm seatpost fit a bit snug because of some residual paint. 4. Chain rubs ever so slightly against the rear seatstay when shifting from first to second gear (see photo). This previously wore a tiny hole in the frame, which was repaired by a professional frame builder before it was powder coated. To prevent it happening again, you could use a small piece of frame protection, a spacer in your rear hub, a smaller cassette, or run it single speed. Brakes: Cantilever or linear pull (V-brakes) Steerer tube: 1 1/8 inch Seatpost: 27.2 mm Seatpost clamp: 28.6 BB: 68mm wide/English (BSA) threading. Rear dropout spacing 135mm. Wheel: 26" Geometry Size - 15" Theoretical TT 561mm Head Angle 71.5 degrees Seat Angle 74.0 degrees Head Tube Length 98mm Chainstay Length 415mm Wheelbase 1020mm Standover Height 720mm Frame is designed for a 80-100mm suspension fork for 26" wheels or approximately a 440mm suspension corrected rigid fork.

Price: 346.95 USD

Location: Madison, Wisconsin

End Time: 2024-10-01T22:22:17.000Z

Shipping Cost: 48.65 USD