Revere

HGW Models 1/32 Faded Pine Tree Wood Grain Transparent Decals (10pcs, A5 Sheet)

Description: 1/32 Faded Pine Tree Wood Grain Transparent Decals (10pcs, A5 Sheet) (SKU: HGW-532020) Condition: Brand New Manufacturer: HGW Product Type / Brief Info: detail-up parts / modeling accessories A5 sheet contains 10 pieces of 60 x 32 mm segments of wood grain decals. This type is transparent, so it is possible, through base colour, to regulate final shade of the decal. Wooden structure is equal to 1/32 scale.Instructions:Pasted/fixed/glued, puttied and polished model paint by base white (it is suitable to polish also this coloured layer before applying wooden decals). The decals are transparent, so it is necessary to apply base colour. It is possibe to mark off single panels by using different shades of base colour (white, of white, yellow). Then cut required shape of panel (with 2 mm overlap) and apply as same as ordinary decal (use Mr. Mark Setter, Mr. Mark Softer). After these processes cut protruded wooden decal with very sharp knife.By this technique it is possible to create very believable imitation of the wooden surface without skill in using of oil paints. Finally it takes cca 4 hours to cover whole fuselage of Albatros D.Va (1/32 WNW).How to apply water-slide decals:1. Preparation: to achieve better result, a gloss or semi-gloss coat is very important. It will make a smooth layer which the decals will suction to and make it much easier to apply and set them.2. Cut out the decal you need (do it on cutting mat)3. Grab the decal with tweezers, place it on the surface of the water and leave it for about 20 seconds.4. Remove the decal from the water and place it on paper towel to remove any excess water.5. Apply decal solution to the part where the decal is to be placed.6. Slide the decal off the backing paper on to the model. Using a paint brush or cotton bud is a good way to do this without damaging the decal.7. Use the brush, knife or cotton bud to position the decal. Using your paper towel, gently dab the decal and soak up the excess water (decal softner is also recommended at this stage. After applying softner, the decal will suction to the part and flatten out smooth.)8. When the decal is completely dry, give another coat of varnish or Klear/Future to seal it. * Please note: model(s) and figure(s) shown in the picture are for illustrative purpose only, which are Not included. - Payment - All payments must be received within 10 days. International Money Orders or Checks are Not accepted. Paypal Only for all international buyers.- Postage - Shipping cost is clearly stated in the "Payment and Postage" section. For multiple items purchase, we combine the postage where it is possible to save. [Combine Shipping info] Since we are located in Australia (AUD), ebay only enables "add-to-cart" function on ebay.com.au. For customers who would like to combine postage but cannot see "add to cart" button, please simply change the item link (url) to "www.ebay.com.au/..." (i.e, only change the domain suffix to .com.au and leave other parts of the url unchanged). Then you will see the button! Pickup is not allowed. For international buyers, please bear in mind that international shipping may be subject to import duties or other taxes.- Shipping Method - Variety of shipping methods are offered. (please click "Postage and payment" tab above to see the details)Note: For overseas buyers, "AusPost Air Mail" and "Standard International Flat rate shipping" do Not supply tracking service. If you need your order insured and trackable (highly recommended), please choose the "Auspost Registered Post International Parcel" option. - Dispatch Times - Orders are normally shipped within 24 hours once the payment is received except Public holidays. All orders are wrapped very carefully before dispatch. Once your order is posted, you will be noticed via email. Please allow up to 28 days for delivery in case of postal delays. (Note: Customers from Argentina, Chile, China, Italy, Kazakhstan, Mexico and Russia may experience longer delivery time. In some cases it may take more than 40 days to arrive.)- 100% 30 Day Money Back Guarantee - All returns or exchanges must be made within 30 days of the shipping date indicated on your sales receipt. After 14 days your order will be assumed satisfactory and claims of shipment errors or requests for returns or exchanges will not be accepted. Faulty products may be returned/exchanged provided that the item(s) are returned in clean, good condition. All returns will be refunded less the shipping cost. If you have any problem with our pruduct, please first contact us rather than leave negative feedback, and we will do our best to satisfy your needs.

Price: 11.95 AUD

Location: Australia

End Time: 2025-01-25T01:39:30.000Z

Shipping Cost: N/A AUD

Product Images

HGW Models 1/32 Faded Pine Tree Wood Grain Transparent Decals (10pcs, A5 Sheet)

Item Specifics

Restocking fee: No

Return shipping will be paid by: Buyer

Returns Accepted: Returns Accepted

Item must be returned within: 30 Days

Brand: HGW Models

Scale: 1/32

MPN: HGW-532020

Recommended Age Range: 12+

Type: Model Upgrade/Accessory

Gender: Unisex

Subtype: Decals / Stickers

Manufacturer: HGW Models

Recommended

HGW Models 1/16 Straps (Light Olive, 26mm x 2.3mm)
HGW Models 1/16 Straps (Light Olive, 26mm x 2.3mm)

$9.11

View Details
HGW 1/35 Junkers Ju87 Stuka Seatbelts for Border Model
HGW 1/35 Junkers Ju87 Stuka Seatbelts for Border Model

$15.65

View Details
HGW 132639 Seatbelts for Spitfire Mk Ia pre-cut laser for Kotare 1/32 scale
HGW 132639 Seatbelts for Spitfire Mk Ia pre-cut laser for Kotare 1/32 scale

$30.99

View Details
HGW 1/32 Gloster Meteor F.4 - Seatbelts for HK Models - 132547
HGW 1/32 Gloster Meteor F.4 - Seatbelts for HK Models - 132547

$16.99

View Details
HGW 1/48 B-25J Mitchell (green) Seatbelts & Masking for HK Models [BASIC LINE]
HGW 1/48 B-25J Mitchell (green) Seatbelts & Masking for HK Models [BASIC LINE]

$20.58

View Details
HGW 1/32 A20 J/K Havoc (Boston IV) Textile Seatbelts for HK Models
HGW 1/32 A20 J/K Havoc (Boston IV) Textile Seatbelts for HK Models

$13.69

View Details
HGW 116001 1/16 Straps Light olive 26mm On both sides printed
HGW 116001 1/16 Straps Light olive 26mm On both sides printed

$21.38

View Details
HGW Models 1/48 Vought F4U Corsair Stencils (Wet Transfers)
HGW Models 1/48 Vought F4U Corsair Stencils (Wet Transfers)

$10.78

View Details
HGW 132534 Seatbelts for B-17 and Seat pre-cut laser resin seat HK Models 1/32
HGW 132534 Seatbelts for B-17 and Seat pre-cut laser resin seat HK Models 1/32

$41.99

View Details
HGW #548017 1/48 Albatros D.V/D.VA Transparent Decals for Eduard kit
HGW #548017 1/48 Albatros D.V/D.VA Transparent Decals for Eduard kit

$8.82

View Details