Honton BGA Rework Station (HT-R392)

Description: Purchased for Lab but never used. Can delivery to San Jose area 1st week on July - I'm headed to DAC2023 in SFOPlan to fly but will drive if someone want the Rework Station Honton BGA Rework Station (HT-R392). BGA Rework Station HT-R392 (also can supply 220V model)New - never been used - bought for Lab, but now closing down LabIntroductions and Specifications: HT-R392 is the latest hot air BGA rework station made by HT.HT-R392 is added one preheating function, you can brake out the humidity of the PCB before reworking them which can improve reworking success rate.HT-R392 with movable PCB holder and is added a fixture which can be moved to right and left freely, which make BGA chip alignment is much more easy. But HT-R390 PCB holder is fixed to some extent, if you need to align the BGA chip needed rework to the hot air nozzle, you need to adjust the screw which takes much time.It is made up of three temperature zones: two are hot air and one infraredThe temperature controller, PLC and heater of the HT-R390 are made of high-precision material which can control the reworking process precisely.HT-R392 is with three independently controlled temperature zones:The first and second temperature zone can be set 8 segment (up/ down) temperature profiles and 8 constant temperature profile. And the bga rework station can save 10 different temperature profiles total. The third one is preheating zone to ensure the the PCB get full heat during reworking process.The temperature profiles for top and bottom heating are going independently when the HT R392 is in working , and the cross-flow fan can help to cool the PCBA rapidly to protect the deformation of PCBA happen.High precision temperature thermocouple can feel the actual temperature precisely.HT R392 with alarm function to make you inform the finishing of the de-soldering and soldering process, and it also with a vacuum suction pen to help to remove the chips.HT-R392 is designed with a V-groove with a flexible movable fixture to protect the deformation of the PCB. HT-R392 can be used to repair PCB with high temperature demand or lead free reworkingThe Hot air nozzles can be rotated 360 degrees, easy to replace. They have a variety of sizes, special requirements can be customized.HT-R392 BGA rework station can repair motherboard for laptop, desktop motherboards, and other large circuit board repair, and mobile phones and other micro-chip board service.Total Power: 3800W The upper part of heating power: 800W The bottom of the heating power: 800W, the bottom of the infrared heating power: 2200W Power supply: single phase 220V AC 50/60HZ 3KVA Size: the body parts of 500 * 420 * 550MM Temperature control: high-precision K-type thermocouple. Positioning: V shaped slot PCB positioning, the maximum size of 320 * 375MM meet PCB5pcs air nozzles (25*25 29*29 34*34 40*40 50*50mm )

Price: 950 USD

Location: Mission Viejo, California

End Time: 2024-11-14T01:24:08.000Z

Shipping Cost: N/A USD