Hybrid 5.5kW Solar Inverter 48V DUAL MPPT Battery Charger US5000 Compatible

Description: 5.5KW HYBRID INVERTER WITH DUAL MPPT CHARGER 6.5KW -ENERGY METER - BMS PYLONTECH LITHIUM ION - 1 YEAR WARRANTY - UK-BASED SUPPORT This product is ENA Listed and complies with the UK Standard G98.G99Please access G99 website to check the G99 certificate for Voltronic ESS510 at VOLTR/12025/V1 It works as hybrid with grid or as off-grid with grid back up. If in off grid mode , certification and MCS is not required. The inverter is programmed to operate with lithium ion batteries like the full range of Pylontech: US2000C, US3000C, US5000 The inverter is nearly new as it was exchanged for a three-phase one, there is some marks on the metal case and the original box is not available. The inverter has the latest firmware and communicates with lithium-ion batteries from Pylontech (US2000, US3000, US5000) The box contains 5.5kW Inverter/charger 230V Single Phase. Pair of MC4 connectors. Eastron energy meter SDM630. Modbus communication card. Long Pylontech power cables and BMS cable.BMS Cable. Free LED Solar Light 3.2Watt Specter. The inverter works off grid in case you do not have a utility supply, in that case, the AC output will support all kind of AC-Loads up to 240VAC at 5500Watt. If you run a system in parallel with the grid (hybrid mode), the inverter will feed the "family" loads up to 5500Watt and any additional load will be covered by the national grid. In the hybrid mode, the ac output (off-grid supply) can still be activated to supply critical loads (fridges, air conditioning, servers, etc) when there is a loss of the grid/mains. NOTICE: The inverter will be delivered with power terminals suitable for the long pair of pylontech cables We also included the right BMS cable that is required to communicate with the US5000/US2000C/US3000C batteries, it is necessary to use the RS485 port of the battery and set the first dip switch of the master battery UP: 1 Up, 2 Down, 3 Down, 4 Down. TECHNICAL SPECIFICATION TABLE - VOLTACON ESS 5500WATT MODEL ESS 5.5KW Maximum PV Input Power 6500 W Rated Output Power 5500 W Maximum Charging Power 2880 W PV INPUT (DC) Nominal DC Voltage / Maximum DC Voltage 360 VDC / 500 VDC Start-up Voltage / Initial Feeding Voltage 116 VDC / 150 VDC MPP Voltage Range 120 VDC ~ 450 VDC Number of MPP Trackers / Maximum Input Current 2 / 2 x 13 A GRID OUTPUT Nominal Output Voltage 208/220/230/240 VAC Output Voltage Range 184 - 264.5 VAC* Max. Output Current 23.9A* Maximum Conversion Efficiency (DC/AC) 96% European Efficiency @ Vnominal 95% AC INPUT AC Start-up Voltage / Auto Restart Voltage 120 - 140 VAC / 180 VAC Acceptable Input Voltage Range 170 -280 VAC Maximum AC Input Current 40 A BATTERY MODE OUTPUT (AC) Nominal Output Voltage 208/220/230/240 VAC Maximum Conversion Efficiency (DC/AC) 93% BATTERY & CHARGER Nominal DC Voltage 48 VDC Maximum Charging Current 100 A PHYSICAL Dimension, D X W X H (mm) 214 x 621 x 500 Net Weight (kgs) 25 STANDARD Compliance Safety IEC/EN 62109-1/-2, IEC 62040-1, EN 61000-6-4, EN IEC 61000-6-2, EN IEC 61000-3-11, EN 61000-3-12, IEC 61727, IEC 62116, G99, NRS 097-2-1, EN 50549-1 BATTERY MODULE ESS II-4810 CAPACITY 5120Wh PARAMETERS Norminal Voltage 51.2VDC Full Charge Voltage(FC) 56V Full Discharge Voltage(FD) 42V Typical Capacity 100 Ah Max Continuous Discharging Current 150A Max Discharging Current 192A at 1min Protecttion BMS, breaker Charge Voltage 56V Charge Current 20A (0.2C) Maximum Charge current 50A (0.5C) Standard Charge method 0.2C CC (Constant current) charge to FC, CV (Contstant voltage FC) charge till charge current decline to <0.05C Inner Resistance ≤20m ohm PHYSICAL Dimension, D X W X H (mm) 214 x 621 x 550 Net Weight (kgs) 30 STANDARD Compliance Safety IEC 62619, EN 61000-6-3, EN 61000-6-1, UKCA, UN38.3

Price: 1331.25 GBP

Location: Coventry

End Time: 2024-10-11T11:27:25.000Z

Shipping Cost: 206.05 GBP