Revere

Hydraulic Gear Pump 1-4 GPM 9 Tooth Spline Shaft SAE A-2 Bolts CCW Cast Iron

Description: If you need any technical assistance, do not hesitate to contact us (973) 344 53 13Free Shipping1-year Warranty Made in Europe Hydraulic Gear Pump 1-4 GPM 9 Tooth Spline Shaft SAE A-2 Bolts CCW Cast Iron Displacement - 0.27 Cubic Inches Shaft Type - 9 Tooth Spline Shaft Mounting Flange - SAE A-2 Bolts Outlet Port - SAE 10 Inlet Port - SAE 12 MAX Working Pressure - 3600 PSI Direction - Counter Clockwise (Left) 1 - 4 GPM GPM @ 2000 RPM - 2.33 MAX Speed - 4000 RPM MIN Speed - 700 RPM PaymentShippingReturnsPaymentShippingReturns We accept payment by any of the following methods:  PayPal, Ebay Payments Please pay as soon as possible so we can ship the item to you right away!  Payments received before 2:30 EST will ship same day.  We offer FREE shipping except for hose assemblies and accessories like pins and bushings. For such items, a $13.98 shipping cost is applied. Your order will be handled within 1 business day of receiving payment (Monday-Friday) and you should expect to receive it within 2-6  business days after dispatch. In the very unlikely event that your item is lost or damaged during shipping, then WE are responsible and will issue either a replacement or a full refund. BENT ROD IS NOT A WARRANTY CASE!!! If you’re not satisfied with your purchase from Magister Hydraulics, contact us within 30 days of purchase for return instructions. Returns after 30 days of purchase are not accepted; all returns will incur a 15% restocking fee. Prior authorization is required; an RMA must be issued. Orders cannot be canceled once fulfilled. If the delivery is refused or a return to sender is requested directly with FedEx, our return policy applies; return shipping and restocking fees will be deducted. ​​​​​​​ To be eligible for return, your item(s) must be unused – in the condition in which it was received, including all original parts, packaging, and accessories. Power equipment products are not eligible for return once they have been in contact with gas or oil. Once gassed or oiled, they will not be accepted for return, even if sent back. The customer will incur charges if products must be restored to their original condition or if accessories or parts are not returned. All original packaging and packing materials must be included to ensure the safety of the item(s). The customer is responsible for return without loss or damage.  In the unlikely event your order arrives damaged, photos of the item(s) and packaging are required to approve your return request. Non-inventory items must be approved for return by Magister Hydraulics; this includes Cross, Enerpac, and Hose Box items. Our restocking fee and policy apply in addition to our vendors. The return address differs from the address provided below. If non-inventory items are delivered to our return address, we will request a label or offer to use our FedEx account and deduct the cost from your refund to ship to our vendor. If using our account, if lost or damaged in transit, we are not responsible. A refund will be issued only when we have received a credit from our vendor. Return Process Ship the merchandise and a copy of the RMA using the label we have provided via eBay. Prepaid return labels are not available for LTL freight, international, and drop-shipped orders. Magister Hydraulics 45 Montgomery Street Belleville, NJ 07109 ​​​​​​​ Upon receipt, merchandise will be sent to our quality control department for inspection. Any item(s) used or not in their original condition will not be accepted or refunded even if sent back; inspection can take up to 72 hours. Upon completion, a replacement or refund for the current merchandise price will be processed, restocking fee and shipping will be deducted from the current merchandise price. Refunds within 30 days will incur a standard restocking fee of 15%, up to 30%. Returns after 30 days of purchase are not accepted even if sent back. Unauthorized, used, or damaged returns will not be approved for refund. If your refund is not approved and you request the item(s) be returned, you are responsible for providing a label and scheduling a pickup, with no exceptions. If the product is defective within the warranty period, please contact us at the time of the alleged failure. Be sure to provide your order number, a video of the item(s) operating- demonstrating the issue, and a detailed description of the problems you have encountered. ​​​​​​​​​​​​​​High QualityTariff-FreeFast ShippingSee our other items How to measure a hydraulic cylinder​​​​​​​ Hydraulic Cylinders Manufacturer - Magister Hydraulics. How it's done. Moving Industry Seamlessly. ---Displacement - 0.27 Cubic Inches ---Shaft Type - 9 Tooth Spline Shaft ---Mounting Flange - SAE A-2 Bolts ---Outlet Port - SAE 10 ---Inlet Port - SAE 12 ---MAX Working Pressure - 3600 PSI ---Direction - Counter Clockwise (Left) ---1 - 4 GPM ---GPM @ 2000 RPM - 2.33 ---MAX Speed - 4000 RPM ---MIN Speed - 700 RPM If you need any technical assistance, do not hesitate to contact us (973) 344 53 13Free Shipping1-year Warranty Made in Europe Hydraulic Gear Pump 1-4 GPM 9 Tooth Spline Shaft SAE A-2 Bolts CCW Cast Iron Displacement - 0.27 Cubic Inches Shaft Type - 9 Tooth Spline Shaft Mounting Flange - SAE A-2 Bolts Outlet Port - SAE 10 Inlet Port - SAE 12 MAX Working Pressure - 3600 PSI Direction - Counter Clockwise (Left) 1 - 4 GPM GPM @ 2000 RPM - 2.33 MAX Speed - 4000 RPM MIN Speed - 700 RPM Payment We accept payment by any of the following methods:  PayPal, Ebay Payments Please pay as soon as possible so we can ship the item to you right away!  Payments received before 2:30 EST will ship same day.  Shipping We offer FREE shipping except for hose assemblies and accessories like pins and bushings. For such items, a $13.98 shipping cost is applied. Your order will be handled within 1 business day of receiving payment (Monday-Friday) and you should expect to receive it within 2-6  business days after dispatch. In the very unlikely event that your item is lost or damaged during shipping, then WE are responsible and will issue either a replacement or a full refund.Returns BENT ROD IS NOT A WARRANTY CASE!!! If you’re not satisfied with your purchase from Magister Hydraulics, contact us within 30 days of purchase for return instructions. Returns after 30 days of purchase are not accepted; all returns will incur a 15% restocking fee. Prior authorization is required; an RMA must be issued. Orders cannot be canceled once fulfilled. If the delivery is refused or a return to sender is requested directly with FedEx, our return policy applies; return shipping and restocking fees will be deducted. ​​​​​​​ To be eligible for return, your item(s) must be unused – in the condition in which it was received, including all original parts, packaging, and accessories. Power equipment products are not eligible for return once they have been in contact with gas or oil. Once gassed or oiled, they will not be accepted for return, even if sent back. The customer will incur charges if products must be restored to their original condition or if accessories or parts are not returned. All original packaging and packing materials must be included to ensure the safety of the item(s). The customer is responsible for return without loss or damage.  In the unlikely event your order arrives damaged, photos of the item(s) and packaging are required to approve your return request. Non-inventory items must be approved for return by Magister Hydraulics; this includes Cross, Enerpac, and Hose Box items. Our restocking fee and policy apply in addition to our vendors. The return address differs from the address provided below. If non-inventory items are delivered to our return address, we will request a label or offer to use our FedEx account and deduct the cost from your refund to ship to our vendor. If using our account, if lost or damaged in transit, we are not responsible. A refund will be issued only when we have received a credit from our vendor. Return Process Ship the merchandise and a copy of the RMA using the label we have provided via eBay. Prepaid return labels are not available for LTL freight, international, and drop-shipped orders. Magister Hydraulics 45 Montgomery Street Belleville, NJ 07109 ​​​​​​​ Upon receipt, merchandise will be sent to our quality control department for inspection. Any item(s) used or not in their original condition will not be accepted or refunded even if sent back; inspection can take up to 72 hours. Upon completion, a replacement or refund for the current merchandise price will be processed, restocking fee and shipping will be deducted from the current merchandise price. Refunds within 30 days will incur a standard restocking fee of 15%, up to 30%. Returns after 30 days of purchase are not accepted even if sent back. Unauthorized, used, or damaged returns will not be approved for refund. If your refund is not approved and you request the item(s) be returned, you are responsible for providing a label and scheduling a pickup, with no exceptions. If the product is defective within the warranty period, please contact us at the time of the alleged failure. Be sure to provide your order number, a video of the item(s) operating- demonstrating the issue, and a detailed description of the problems you have encountered. ​​​​​​​​​​​​​​Tariff-FreeFast ShippingHigh QualitySee our other items How to measure a hydraulic cylinder​​​​​​​ Hydraulic Cylinders Manufacturer - Magister Hydraulics. How it's done. Moving Industry Seamlessly. Displacement - 0.27 Cubic Inches Shaft Type - 9 Tooth Spline Shaft Mounting Flange - SAE A-2 Bolts Outlet Port - SAE 10 Inlet Port - SAE 12 MAX Working Pressure - 3600 PSI Direction - Counter Clockwise (Left) 1 - 4 GPM GPM @ 2000 RPM - 2.33 MAX Speed - 4000 RPM MIN Speed - 700 RPM

Price: 147 USD

Location: Newark, New Jersey

End Time: 2024-12-07T18:50:46.000Z

Shipping Cost: 0 USD

Product Images

Hydraulic Gear Pump 1-4 GPM 9 Tooth Spline Shaft SAE A-2 Bolts CCW Cast Iron Hydraulic Gear Pump 1-4 GPM 9 Tooth Spline Shaft SAE A-2 Bolts CCW Cast Iron Hydraulic Gear Pump 1-4 GPM 9 Tooth Spline Shaft SAE A-2 Bolts CCW Cast Iron Hydraulic Gear Pump 1-4 GPM 9 Tooth Spline Shaft SAE A-2 Bolts CCW Cast Iron Hydraulic Gear Pump 1-4 GPM 9 Tooth Spline Shaft SAE A-2 Bolts CCW Cast Iron Hydraulic Gear Pump 1-4 GPM 9 Tooth Spline Shaft SAE A-2 Bolts CCW Cast Iron Hydraulic Gear Pump 1-4 GPM 9 Tooth Spline Shaft SAE A-2 Bolts CCW Cast Iron

Item Specifics

Return shipping will be paid by: Seller

All returns accepted: Returns Accepted

Item must be returned within: 30 Days

Refund will be given as: Money Back

Return policy details:

Hydraulic Pump Type: Hydraulic Gear Pump

Country/Region of Manufacture: Ukraine

Custom Bundle: No

Inlet Port Diameter: SAE 12

Reservoir Capacity: Does Not Apply

Power Source: Manual

Type: Hydraulic

Model: HGP CI09S-A02-027L

Rated Pressure: 3600 psi (250 bar)

MPN: HGP CI09S-A02-027L

Brand: Magister Hydraulics

Outlet Port Diameter: SAE 10

Recommended

Hydraulic Cylinder Tie Rod Double Action 3" Bore 8" Stroke 2500 PSI 3x8 NEW
Hydraulic Cylinder Tie Rod Double Action 3" Bore 8" Stroke 2500 PSI 3x8 NEW

$192.15

View Details
Hydraulic Cylinder Welded Double Acting 2.5" Bore 30" Stroke Cross Tube 2.5x30
Hydraulic Cylinder Welded Double Acting 2.5" Bore 30" Stroke Cross Tube 2.5x30

$301.35

View Details
Hydraulic Cylinder Welded Double Acting 2" Bore 16" Stroke Cross Tube 2x16 NEW
Hydraulic Cylinder Welded Double Acting 2" Bore 16" Stroke Cross Tube 2x16 NEW

$215.25

View Details
Hydraulic Cylinder Welded Double Acting 3" Bore 12" Stroke Clevis End 3x12 NEW
Hydraulic Cylinder Welded Double Acting 3" Bore 12" Stroke Clevis End 3x12 NEW

$281.40

View Details
Magister 2" x 16" Hydraulic Cylinder
Magister 2" x 16" Hydraulic Cylinder

$180.00

View Details
Hydraulic Cylinder Welded Double Acting 2" Bore 12" Stroke Tang 2x12 WTG NEW
Hydraulic Cylinder Welded Double Acting 2" Bore 12" Stroke Tang 2x12 WTG NEW

$206.85

View Details
Hydraulic Cylinder Welded Double Acting 2" Bore 22" Stroke Cross Tube 2x22 NEW
Hydraulic Cylinder Welded Double Acting 2" Bore 22" Stroke Cross Tube 2x22 NEW

$236.25

View Details
TRC 2x20 Tie Rod Hydraulic Cylinder 2 inch Bore 20 inch Stroke 2500 PSI 2x20 NEW
TRC 2x20 Tie Rod Hydraulic Cylinder 2 inch Bore 20 inch Stroke 2500 PSI 2x20 NEW

$181.65

View Details
Hydraulic Cylinder Welded Double Acting 2" Bore 20" Stroke Cross Tube 2x20 NEW
Hydraulic Cylinder Welded Double Acting 2" Bore 20" Stroke Cross Tube 2x20 NEW

$229.95

View Details
5" bore x 16" stroke High Speed Dump Hoist Hydraulic Cylinder
5" bore x 16" stroke High Speed Dump Hoist Hydraulic Cylinder

$459.00

View Details