IAG Stage 1 Blueprinted EJ25 11mm Oil Pump for 04-21 STI, 02-14 WRX, 05-09 LGT,

Description: IAG Stage 1 Blueprinted EJ25 11mm Oil Pump fits Subaru 04-21 STI, 02-14 WRX, 05-09 LGT, 04-13 FXT IAG Stage 1 Blueprinted EJ25 11mm Oil Pump The oil pump is quite literally the heart of any engine. Responsible for pumping the oil through the entire engine, it is one of the most critical parts, but often one of the most overlooked. Subaru EJ25 oil pumps should always be inspected before installation on any engine build. Over the years our experience shows that the OEM oil pumps are inconsistently assembled by the manufacturer. It is very common to find incorrectly torqued hardware and, at times, rotor tolerances that are not within specification. IAG now offers a Stage 1 Oil Pump that has the rotor tolerances, hardware, and pressure relief valve inspected. Each pump is also modified to increase oil pressure which aids in ensuring proper oil delivery. The pump is then assembled by our trained staff, providing you with a product which is ready to install, right out of the box. Each Stage 1 pump starts as a new OEM Subaru oil pump with 11mm rotors. The pump is completely disassembled and checked for contaminants or debris from the manufacturer. The pump is then ultrasonically cleaned. During the modification process the OEM Pressure Relief Valve Piston is REM polished, providing a low Ra surface, which reduces the friction of the component, and greatly reduces the chance of the piston galling or sticking in the bore - a problem that is frequently seen even on brand new oil pumps. The piston is reinstalled and confirmed to operate correctly. The rotors are measured and checked to be within the manufacturer's specification - aka Blueprinted, and installed next. The pump is then put together with a light coating of assembly lube to reduce friction and scuffing and aid in priming on first start up. Finally, the backing plate is installed. Loctite is added to the hardware, and each piece receives a painted mark after it is correctly torqued. Features: 11mm Oil Pump Rotors Shimmed and REM Polished Pressure Relief Valve Measured, Blueprinted, and Assembled Packed with assembly lube Ships ready to install with all required hardware Designed for Single and Dual AVCS engines Great for stock and mildly built (IAG Stage 1) engines used in street cars Fits all EJ series Subaru Engines Includes: (x1) IAG 11mm Blueprinted Oil Pump (x1) Front Crank Shaft Seal (x1) Oil Pump O-ring (x7) Oil Pump Zinc Plated Bolts Recommended: For use with Stock or IAG Stage 1 Engines. IAG Stage 1 Blueprinted EJ25 11mm Oil Pump fits Subaru 04-21 STI, 02-14 WRX, 05-09 LGT, 04-13 FXT IAG Stage 1 Blueprinted EJ25 11mm Oil Pump The oil pump is quite literally the heart of any engine. Responsible for pumping the oil through the entire engine, it is one of the most critical parts, but often one of the most overlooked. Subaru EJ25 oil pumps should always be inspected before installation on any engine build. Over the years our experience shows that the OEM oil pumps are inconsistently assembled by the manufacturer. It is very common to find incorrectly torqued hardware and, at times, rotor tolerances that are not within specification. IAG now offers a Stage 1 Oil Pump that has the rotor tolerances, hardware, and pressure relief valve inspected. Each pump is also modified to increase oil pressure which aids in ensuring proper oil delivery. The pump is then assembled by our trained staff, providing you with a product which is ready to install, right out of the box. Each Stage 1 pump starts as a new OEM Subaru oil pump with 11mm rotors. The pump is completely disassembled and checked for contaminants or debris from the manufacturer. The pump is then ultrasonically cleaned. During the modification process the OEM Pressure Relief Valve Piston is REM polished, providing a low Ra surface, which reduces the friction of the component, and greatly reduces the chance of the piston galling or sticking in the bore - a problem that is frequently seen even on brand new oil pumps. The piston is reinstalled and confirmed to operate correctly. The rotors are measured and checked to be within the manufacturer's specification - aka Blueprinted, and installed next. The pump is then put together with a light coating of assembly lube to reduce friction and scuffing and aid in priming on first start up. Finally, the backing plate is installed. Loctite is added to the hardware, and each piece receives a painted mark after it is correctly torqued. Features: 11mm Oil Pump Rotors Shimmed and REM Polished Pressure Relief Valve Measured, Blueprinted, and Assembled Packed with assembly lube Ships ready to install with all required hardware Designed for Single and Dual AVCS engines Great for stock and mildly built (IAG Stage 1) engines uséd in street cars Fits all EJ series Subaru Engines Includes: (x1) IAG 11mm Blueprinted Oil Pump (x1) Front Crank Shaft Seal (x1) Oil Pump O-ring (x7) Oil Pump Zinc Plated Bolts Recommended: For use with Stock or IAG Stage 1 Engines. × Buy now and save! Tell a friend Visit store Watch now Postage info Click the Postage tab above the listing description for more info Click the Postage tab above the listing description for more info! Additional delivery notes PICK UP OPTION Sorry, our items are NOT available for pick-up. PAYING VIA PAYPAL We accept PayPal on our all our items so you can shop with confidence. Simple choose the PayPal option when proceeding through the checkout. Additional Information No additional information at this time Ask seller a question You might also like IAG V2 EZ-Lift Soft Top Assist Strut System fits Ford Bronco 2021 2022 2023+ 4DR IAG I-Line Mini Bull Bar w/Integrated Light Mount fits Ford Bronco 21-23+ w/Mod IAG Removable Rear Dual Cup Holder fits Ford Bronco 2021 2022 2023+ (Not Sport) IAG I-Line Full Length Dash Mount Rail System fits Ford Bronco 2021 2022 2023+ Contact To contact our Customer Service Team, simply click the button here and our Customer Service team will be happy to assist. Ask seller a question Â© IAG Performance Postage Click the Postage tab above the listing description for more info Payment Accepted Payment Methods PayPal Returns Returns are accepted Items must be returned within 30 days of the auction ending Buyer will pay for return shipping. eBay integration by

Price: 349.99 USD

Location: Westminster, Maryland

End Time: 2023-12-22T00:31:51.000Z

Shipping Cost: 0 USD