Description: Technical Product Bulletin FAST CURE IDUSTRIAL GRADE EPOXY ADHESIVE Takes 2 hours to hold and harden. Do not move after 4 minutes until it fully cures.You have 4 minute work time which is the amount of time you have to apply the product before it begins to dry. Must work fast. ** Buy AA-BOND 28 if you need 1 hour work time.Industrial grade bond to all substrates. The only two substrates which exhibit a weak bond are rubber and plastics.Comes with two mixing tips. Simply remove cap, twist and dispense product through the mixing tip. The mixing tip will not be usable if you stop dispensing for an hour. Keep tip attached until next use at which time you can replace it.This 10ML cartridge also comes with a plunger so a dispensing gun is not needed.This product is odorless / solvent free PRODUCT DESCRIPTION: AA-BOND 201 is an exceptional epoxy formulation recommended for lower temperature or wet industrial bonding applications where FAST CURING is required. AA-BOND 201 is versatile two-part epoxy system contains no solvents, mixes easily at room temperature, and is suitable for high performance structural bonding applications where the combination of very fast room temperature curing coupled with low shrinkage and excellent mechanical and electrical properties is needed. AA-BOND 201 develops strong, tough bonds to metals, plastics, glass and glass fabrics, hardboards and forestry products, ceramics, rubber, masonry materials, and other construction materials. AA-BOND 201 is an excellent electrical insulator, and provides superior resistance to vapors and gases, water, galvanic action, petroleum fuels, salt solutions, and many other organic and inorganic compounds AA-BOND 201 develops significant properties 1 hour after mixing. However, an extended cure of 4-6 hours at 25°C is required for full matured bonds. Note: AA-BOND 201 develops a high exotherm. Use immediately after mixing. The exothermic reaction begins within 2 minutes after initiating the mixing step, so have everything ready mixing. GENERAL PROPERTIES:AppearanceSlight haze/ slight strawCure TypeRoom temperature or Heat cureBenefitsResistant to many organic/inorganics Strong bond strength Great electrical insulator DurableMix Ratio by weight100:100 / Resin:HardenerSubstratesmetals, plastics, concrete, sheetrock, tile, marble, stone, rock, plaster,cement,glass fabrics, wood, leather and rigid plasticsOperating Temperature-60 to 110 °CTypical Application(s)Anything requiring the unique properties this adhesive offers UNCURED PROPERTIES:Viscosity @ 25 °C, mPa∙s (cP)ThixotropicSolids Content100%Specific Gravity, mixed1.2 g/cc CURE SCHEDULE:30 minutes @ 65°C2 hours@ 25°CMISC PROPERTIES:Volume Resistivity5.00e+11 ohm-cmDielectric Constant4.8Dielectric Strength410kV/inCTE, linear33.3 μin/in-°F@ RTHardness, Shore D70 GENERAL INFORMATION: For safe handling information on this product, consult the Material Safety Data Sheet, (MSDS). HOW TO USE: 1) Carefully clean and dry all surfaces to be bonded. 2) Apply AA-BOND 201 completely mixed adhesive to the prepared surfaces, and gently press these surfaces together. Contact pressure is adequate for strong, reliable bonds; however, maintain contact until adhesive is completely cured. 3) Some separation of components is common during shipping and storage. For this reason, it is recommended that the contents of the shipping container be thoroughly mixed prior to use. 4) Some ingredients in this formulation provided may crystallize when subjected to low temperature storage. A gentle warming cycle of 52°C for 30 minutes prior to mixing components may be necessary. Crystallized epoxy components do not react as well as liquid components and should be re-dissolved prior to use for best results. AVAILABILITY: This epoxy can be supplied in various different packages. Froo www.froo.com | Froo Cross Sell, Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application
Price: 119.99 USD
Location: Warwick, Rhode Island
End Time: 2025-01-04T18:50:44.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Model: AA-BOND 201-2
Country/Region of Manufacture: United States
Benefit 1: Resistant to many organic inorganics
Benefit 2: Strong bond strength Durable low shrinkage
Benefits 3: Great electrical insulator versatile no solvents
Substrates 1: metals, plastics, concrete, sheetrock, tile
Substrates 2: marble, stone, rock, plaster,cement,glass
Substrates 3: fabrics, wood, leather and rigid plastics
MPN: 201-2
Brand: Atom Adhesives
