Industrial Oil-Water Separator Recovery Machine Oil Skimmer CNC Steel Belt 13L/H

Description: Industrial Oil-Water Separator Recovery Machine Portable Mini Oil Skimmer CNC Steel Belt 13L/H Oil Scraper Degreaser 220V/14W Product parameter Name: Oil Skimmer Package weight: 4 kg Packing size: 370 mm * 22 mm * 250 mm Model: JY - 5 ot Oil removal capacity: 13 l/H Power: 14 w Weight: 4 kg Bandwidth: 50 mm Preface Thank you for purchasing this product (steel belt type skimming machine), said in the heartfelt gratitude, in order to Operate this product correctly, and play the best performance, please read carefully before using this operation For manual or using a mobile phone WeChat scan qr code to check the installation video. The working principle of This product is installed above the reservoir, made of quality stainless steel ring steel belt, Using the surface tension between oil and water, the physical properties of affinity, will be stranded in the main liquid form Layer of oil adsorption on the surface of steel strip, cycle drain oil equipment. Functional condition The Lord liquid, water soluble liquid density 1.0 above, more than 1.0 cp viscosity, surface tension More than 70 DGN/cm. Discharge oil: oil under the specific gravity of 0.9, 40 DGN/cm below the surface tension. Heat resistance and chemical resistance: this equipment is in the oil recovery of steel strip with excellent heat resistance and chemical resistance Sex, but according to the principle of recycling adhesion can follow the liquid temperature and lower recovery rate, so please In the liquid temperature control under 70 ℃, water PH value control between the PH3 to 11, so as to achieve To the best performance.Shape dimension figure Pay attention to and comply with the matters From the effective use of safety, maintenance and management and health level, should pay attention to the following items: 1, please to use for this device specifications of the rated supply voltage correct connection. 2, please comply with this operational manual installation method properly installed. 3, this product should be paid attention to in the operation of the action, do not touch the body or utensils. 4 the ban on combustible gas or its dangerous goods under the working conditions of use. 5, if the liquid reservoir in the mixing state, namely can't recycle oil effectively, should be used for 24 hours When, set the mixing state of stop time to work efficiency. 6, the temperature of the liquid in the liquid storage tank is too high, according to theory of recycling viscosity as the liquid temperature Rise and the recovery rate of decline, in this situation should use SPC, after being to a certain degree of cooling Operation or by adopting the method of forced cooling storage tank. 7, when engaged in inspection, adjustment or cleaning, be sure to shut off the power to operate. 8, in order to avoid leakage or malfunction occurs, be sure to keep the controller external dry, clean, it is strictly prohibited Within the body into the controller. 9, please check the rubber scraper plate, adjust oil scraper. 10, the use of high-temperature grease lubrication motor gear box, to replace three times a year. 11, this product steel strip using magnet wheel drive, the magnet wheel sunken place if product is iron or iron powder When need to be clear.If the tank iron quantity is more, please let us know the company made another form oil removal. 12, if there is not much oil, please use 24 hours timer device control intermittent operation (because of the liquid Oil adsorption, steel strip will be a small amount of moisture adsorption. Failure and in addition to the method 1 1, steel tape does not oil Reason 1:1 the water suspended solids, such as small wood chips, pieces of plastic forming a fence to float Oil cannot come into contact with the steel belt. In addition to the methods: will be suspended solids removal. Reason 2: oil, such as animal oil, oil, etc. Excluded methods: pool cover, the air of a pool with steam heating to deepen. Reason 3: the oil contains a lot of dust, colloid or block form such as tofu pudding. Method: the water with high pressure air aeration into pieces. Reason 4: the stain steel strip surface adhesion with numerous things. Elimination method: unload the steel belt use detergent to clean. 2 2, magnet wheel running, steel strip is not running Reason 1:1 the magnet wheel and steel belt skid, scraper where no water is too dry. Method: the rubber scraper with some water or oil lubrication, because of no water between steel belts and rubber sheets When the lubrication friction resistance. Reason 2:2 magnet wheel and steel belt skid, magnet wheel sunken place full stains or magnet wheel installed wrong Falling round magnet magnetic by mistake. Elimination method: wash the magnet wheel or properly installed magnet wheel. 3 3, the magnet wheel and steel strip is not running. Reason: the power cord poor contact or motor has a fault. Method: test line or with your company, please maintenance change motors.

Price: 218.99 USD

Location: shenzhen

End Time: 2025-01-27T17:00:28.000Z

Shipping Cost: 71 USD