Inkjet Waterslide Decal Paper Clear Water Slide Transfer 8.5"x5.5" A5 10 Sh PK

Description: Inkjet Waterslide Decal CLEAR Paper 10 sheets, A5 Using Inkjet printers Make beautiful gifts and decorations for the home! Ideal for applying to non-porous surfaces including painted wood, glass, plastic, melamine, soap, metal and wax Use clear paper for light backgrounds Use white paper for dark backgrounds Only for items that will be handwashed (will not stand a trip in the dishwasher!) A clear spray varnish is required to use this product NOTE: Due to shipping regulations, we are unable to ship Krylon acrylic spray with our Inkjet decal paper. You can buy this locally. It is available at Lowes, Home Depot, Ace Hardware, Walmart, etc. Any acrylic clear coat spray will work. Note that the laser/color copier paper does not require application of the spray. Premium inkjet decal paper is suitable for high resolution needs and for covering either flat or curved surfaces. Make Water-slide (Water slip) decals for Scale model RR, cars, plastic, airplanes, ships, toys, wood furniture, guitars, helmets and other WaterSlide decal paper for quality image transfers for Inkjet printers. to candles, glass, wood, plastic and other surfaces. HOW IT WORKS: White/Clear Inkjet Waterslide Decal Paper You will need: Hair Dryer, Ruler, Scissors, Tissues/Towel STEP 1: Design your decals using any graphics software program. Use A4 sheet INK JET Decal Paper or cut sheet . STEP 2: Set your printer as follows: Resolution = Best Paper = Photo Gloss(glossy "Film" setting in your printer driver) -Print your decal on the glossy side of Inkjet Decal Paper- STEP 3: Spray your printed sheet evenly with Kryon Acrylic Crystal Clear High Gloss spray until the sheet has a shine (2-3 coats). Allow 30 to 60 minutes to dry and set ( This product can be found at any local craft or hardware stores such as Lowe's, Home Depot, Ace Hardware, Wal-mart, ect. Any acrylic clear coat spray will work.) Apply the fixative to the whole page. Do not cut out individual decals and apply fixative, because the edges of the paper will absorb the fixative making it impossible to slide the decal paper off. STEP 4: When the fixative clears (or dries ). Cut out each individual decal image using a standard pair of sharp household scissors. STEP 5: Place decal ( dip in warm water, not hot water ) into a cup of clean water for 45-60 seconds and remove when the thin decal film begins to roll up and if so it will then straighten out again. When the film starts to loosen the paper.(Discard backing material after the decal has been removed ) Do not leave the paper for a long time ( over a minute ) in the water. STEP 6: Apply decal to clean non-porous surface; ceramic, glass, metal, plastic, soap, candles, mylar balloons, model trains, planes, cars, etc. Work out air bubbles with decal squeegee and let dry. It is important to remove all water and air bubbles. Note: You can speed up drying time by placing your decorated objects under/near a fan. If you wish to protect your decorated item from surface scratches, moisture, or fading, spray your dried decorated surface with acrylic varnish spray. Disclaimer: We have tested our media on various personal inkjet printers with good results. The user of this paper/film must determine the suitability of this product before beginning the process, using his equipment and method of application. The sellers and manufacturer are not liable for any injury, direct or consequential, arising from the use of, or inability to use this paper/film.

Price: 9.99 USD

Location: Miami, Florida

End Time: 2024-10-02T02:23:14.000Z

Shipping Cost: N/A USD