Intelligent Pipeline Detector Utility Locator Pipeline Measurement Depth 0-20m

Description: Intelligent Pipeline Detector Utility Locator Pipeline Measurement Depth 0-20m Introduction:Intelligent pipeline detector, also known as underground utility cable locator, cable path instrument, is a path detection instrument with strong comprehensive performance. It has pipeline path detection, cable identification, fault search and other functions. The instrument is composed of transmitter, transmitting current clamp, receiver, receiving flexible current clamp, connecting test line, A-fault locator frame (optional), etc.Intelligent pipeline detector can be used for path detection, pipeline survey and depth measurement of metal pipelines and underground cables under trenchless excavation. The instrument uses a variety of filtering technologies, has anti-interference ability, and can accurately locate and depth. It is suitable for the detection and patrol of underground metal pipelines, pipeline management and maintenance, municipal planning and construction, power supply and other departments, etc. It is one of the necessary instruments of pipeline maintenance units.Features:Multiple detection modes: classic positioning mode, wire cruise mode, peak and trough mode；Classic positioning mode: compass, direction and signal amplitude display, visually display the left and right direction of the pipeline。Lead cruise mode: 360 omnidirectional pipeline path indication, continuous display of depth, current, and pipeline relative position. The interface is simple and intuitive, and it can be operated without experiencePeak trough mode: display the peak trough waveform at the same time, and can analyze whether the underground pipeline has parallel line signal interference through the waveform, so as to prevent the measurement error caused by the interference. Current direction determination (partial frequency), can be calibration current direction, eliminate adjacent line interference, to prevent tracking errors.Full digital high-precision sampling processing: stable and reliable, ultra-high sensitivity, extremely narrow reception frequency band, strong anti-interference ability, can fully inhibit the power frequency and harmonic interference of adjacent running cables and pipelines.Multiple detection frequencies: 13 active detection frequencies and 2 passive detection frequencies.Multiple signal output modes: direct connection output, caliper coupling, induction method.Transmitter digital amplifier power output, automatic impedance matching, automatic protection.Receiver specifications:FunctionPipeline detection (cable position tracking, direction display, depth measurement, current measurement), cable identification, A word frame fault search (optional function)Power8.4V large capacity rechargeable lithium batteryInput modeBuilt-in receiver coil, flexible caliper, A-character frame (optional function)Receive frequencyActive detection frequency:250Hz、577Hz、640Hz、1.28kHz、2.56kHz、3.20kHz、4.09kHz、8.19kHz、10.2kHz、33kHz、66kHz、82kHz、197kHzPower frequency passive detection frequency:50Hz、60HzRF passive detection frequency band: the central frequency is divided into33kHz、66kHz、82kHz、197kHzPipeline detection modeWide peak method, narrow peak method, sound valley methodPipeline detection displayClassic positioning mode, wire cruise mode, peak and trough modePipeline detectionRange of detectionDirect connection method: generally can reach the cable length of 0~20 kilometers, mainly determined by the grounding resistance, cable resistance and cable buried depthCoupling method: generally can reach the length of the cable 0~10 kilometers, mainly determined by the grounding resistance, cable resistance and cable buried depthInduction method: suitable for cables with buried depth less than 2mDepth and currentDisplay the cable depth and current value in real timePipeline measurement depth0-20mDeep precisionPlane position precision accuracy: the central axis position of the target cable or line：±5%（Buried deep in0-3m）-10%（Buried deep in3m-20m）Positive and wrong promptExcluding the interference of adjacent cables, in the measurement of adjacent cables, the measurement of the adjacent cables can be distinguished according to the different signal strength and the measured current phase of the adjacent cables. In the process of tracking the cables, the phase dial and pointer can be observed to distinguish the measured cables and the adjacent cablesSound instructionsFM tone with signal intensitycapacity of resisting disturbanceVery narrow receiving frequency band and unique digital processing method can fully suppress the power frequency and harmonic interference of adjacent operating cables and pipelinesinterference distanceWhen using the coupling method and the induction method, the transmitter will produce interference in close distance. The distance of interference is related to the transmission power and frequency. The greater the power, the higher the frequency, the stronger the interference.The minimum distance of the receiver without disturbed by the transmitter often needs to be determined by test:Pipeline detection: 5m away, 20m away as no interference Cable identification: the coupling method beyond 2~5m can be confirmed as no interferenceCable identificationIdentification mode: flexible caliper intelligent identification;Number of calibrate cables: 1~20;Calibration value: the current percentage of the received signal and the transmitted signal between 75% and 135% of the calibration value is one of the conditions for successful identification;Directionality: the transmitter clamp, receiver clamp must be in the same direction as the loading signal, which is one of the conditions for successful identificationCable identificationRange of detectionDirect connection method: can identify the signal with a circuit resistance of 0 Ω ~ 8 kΩ (generally, the length of the cable can reach 0~20 km, mainly determined by the grounding resistance and cable resistance)Coupling method: can identify the signal with circuit resistance of 0 Ω ~ 1 kΩ; (generally the cable length is 0~6 km, mainly determined by the grounding resistance and cable resistance)Display4.3 LCD color screen LCD (highlight screen), visible in the sunTouch screenYesSize350mm(length)×155mm(width)×700mm(high)Weight2kgConnection interfaceType-C USB interface, air socketCoil inner diameterφ200mm(A larger caliber can be customized as needed)Working temperature and humidity-10℃～40℃；Below 80%RhStore temperature and humidity-10℃~50℃；≤95％RH, No condensationwithstand voltageAC2000V/rms(Before the front and rear ends of the enclosure)Suitable for safety regulationsIEC61010-1 CAT Ⅲ 600V，IEC61010-031，IEC61326，Pollution grade 2Transmitter specifications:FunctionMultiple frequency signal transmission modesPower10.8VLarge-capacity rechargeable lithium batteryOutput methodDirect connection method, caliper coupling method, induction methodOutput modeAutomatic identification, according to different accessoriesoutput frequency250Hz、577Hz，640Hz，1.28kHz，2.56kHz，3.20kHz，4.09kHz，8.19kHz，10.2kHz，33kHz，66kHz，82kHz，197kHzOutput power15 Wmax, 6-gear adjustableimpedanceAutomatic real-time impedance matching and protection functionDirect output voltage150Vpp maxCircuit protectionWith overload and short-circuit protectionDisplay5-inch LCD color screenTouch screenYesInstrument size320mm(Length)×275mm(Width)×145mm(High)WeightThe transmitter is about 3.85kg; the transmitter clamp is about 1.18kgTransmitter clamp inner diameterφ125mmCable length of transmitter clamp3mTest cableRed test cable 3m, black test cable 3mConnection interfaceUSB interface, DC interface, aviation socketResistance to pressureThe transmitter adopts an integrated special tool box type design, and the box body can withstand the pressure of about 200kgWithstand voltageAC 3700V/rms(Before the top surface and bottom surface of the instrument box)Electromagnetic characteristicsIEC61326(EMC)Suitable for safety regulationsIEC61010-1(CAT Ⅲ 300V、CAT IV 150V、class of pollution 2)Packing List:Transmitter1pcsReceiver1pcsTool cloth bag1pcsCoupling transmitter clamp1setReceive the flexible current clamp1setCrocodile clip test cable1pcsTwo-headed alligator clip test cable1pcsGround needle1pcsReceiver charger1pcsTransmitter charger1pcsUSB data wire2pcsInstructions, warranty card, qualification certificate1set

Price: 3683.33 USD

Location: 合肥

End Time: 2024-10-11T08:20:00.000Z

Shipping Cost: 0 USD