Item # 739-P BOX OF USED POTENTIOMETERS MANY DIFFERENT VALUES, ALL TESTED

Description: ITEM #739-P A note to all of my favored friends and customers. It has come to my attention that someone has attempted to steal my user name and they may be trying to fool you into buying from them while you think that you are buying from me. The way to tell the difference is that on my ebay user name I have and will continue to have no spaces in my name. It is one word and always has been " vintageelectronicpartsguy ". I hope this will clear up any questions regarding this matter that you may have. As always you can reach me through ebay messaging. I hope you all will have a great spring and summer.Doug Fisk <>< :-)BOX OF POTENTIOMETERSSTANDARD AND SLIDER TYPES(over 4 dozen of them)Below is all of the information I have on these. _________________________________________________________________Brand Type Rtd. Ω Act. Base Shaft above Threads Type Turns Watts Other Information Length Diameter ------------------------------------------------------------------------------------------------------------------------------------------CRL -- 3000Ω 3.0K 1.10" 7/16" 1/4" Slotted 3/4 T 5w WW302Ohmite AB ----- 1.13M 1.10" 3/8" 1/8" Std. 3/4 T -- No. Cu--1052AB J ----- 50K 1.10" 1/4" 1/4" Std. 3/4 T -- 210-61AB J 2.0M 2.25M 1.10" 3/8" 1/4" Slotted 3/4 T -- 311-042----- -- ----- 24.9K 1.10" 1/2" 1/4" Flat 3/4 T -- 1377619 052-044Mouser B 500Ω 527.4 1.10" 5/16" 1/4" Std. 3/4 T -- ----------AB J ----- 3.0K 1.10" 3/8" 1/4" Slotted 3/4 T -- 408900LAB J 1000Ω 1.16K 1.10" 1/2" 1/4" Std. 3/4 T 2w RV4ATSD102ACRL -- 100Ω 105.3Ω 1.10" 3/8" 1/4" Knurled 3/4 T 5w WN-101AB J 500Ω 505.4Ω 1.10" 7/16" 1/4" Std. 3/4 T -- Jain 0565501UA & RV4NAYSD501AAB J 0.5M 0.64M 1.10" 1/8" 1/4" Slotted 3/4 T -- 353-5282Claro. -- 4.0M 3.5M 1.10" 1 1/2" 1/4" Std. 3/4 T -- 101-CCTS 321 500Ω 500Ω 1.10" 3/8" 1/4" Std. 3/4 T -- 3215501A----- -- ----- 47.5K 0.90" 3/8" 1/4" Std. 3/4 T -- 13-19 304-6440Claro. -- ----- 10.4K 1.04" 1 3/4" 1/4" Slot.Plas. 3/4 T -- 013289 19-7049CTS 321 500Ω 500Ω 1.04" 3/8" 1/4" Std. 3/4 T -- 321S501A .6602----- -- ----- 1.01M .93" 3/8" 1/4" Std. 3/4 T -- 1377639-052-013 CTS -- ----- .697M .93" 3/8" 1/4" Flat 10 T -- 1377407 & VA45R102A ----- 8-02 1K 1.28K .93" 1/4" 1/4" Slot.Plas. 3/4 T -- 1346502----- --- ----- 13.34K .93" 1/4" 1/4" Slotted 3/4 T -- 137.6251-023 002 JP ? ogd 250Ω 241.5Ω 93" 1/4" 1/4" Std. 3/4 T -- ----------------- --- ----- 23.4K .93" 1/2" 1/4" Flat 3/4 T -- 1377619 052-044----- --- ----- 8.0K .93" 5/8" 1/4" Slot. Knurl 3/4 T -- 1377140-A-33457 ----- --- ----- .697M .93" 5/16" 1/4" Std. 3/4 T -- 137633 052-013Mouser B 500Ω 592Ω .93" 5/16" 1/4" Std. 3/4 T -- ----------------- --- 500Ω 500.3Ω .93" 5/16" 1/4" Slot.Plas. 3/4 T -- 220305-6 235542Mexico 137 50K 49.7K .93" 1 3/4" 1/4" Slot.Plas. 3/4 T -- 271-1716Taiwan B 500K 431K .93" 1 3/4" 1/4" Std. 3/4 T -- Alpha-------- B 10K 10.18K . 72" 1" 1/4" Std. 3/4 T -- F:------- -- 500K 574.4K .72" 5/16" 1/8" Slotted 3/4 T -- 1376109 & 376-0211-00CTS 932 ----- 544.5K .72" TH=3/8" 1/8" Slotted 3/4 T -- 4x127TBM B 1K .91K .72" TH=9/16" 3/8" Slot. Knurl 3/4 T -- 183 N 324------ 137 10K 10.3K .72" 0.0" 1/4" X Slot. Knrl 3/4 T -- 137-7918 M121.9Claro. 20 ----- 10.56K .63" 1/2" 0.12" Std. 3/4 T -- 260016 9446Claro, 381N 10K 9.62K .63" 1/2" 0.12" Slotted 3/4 T -- 381M-10K-S19-9029ALPS B 1K 0.91K .48" 1/2" 1/4" Slot. Knurl 3/4 T -- 4D3FTaiwan B 10K 9.0K .94" 1/4" 1/4" Flat 3/4 T -- -------------------- --- --- 23.4K .93" 3/8" 1/4" Flat 3/4 T -- 1377619 052-044JP ? B 10K 7.82K .94" 3/8" 1/4" Std. 3/4 T -- 2DD (stop halfway)Mouser B 500K 489.4K .94" 5/16" 1/4" Std. 3/4 T -- ----------------CTC --- 5K 3.9K .94" 7/16" 1/4" Std. Plas. 3/4 T -- ---------------- CTS 137 26.2K 125VAC .93" 3/4" 1/4" Std. 3/4 T 3Amp 600037 7032 Bourns Slider, 6451B, 100K, 101.2K, .90", Res. ± 5%, Lin. ± 0.5%, 3/8", Std., 10 TSpectrol Slider, Model 500, 5K, 5.06K, .88", Res. ± 3%, Lin. ± 0.25%, 1/8", Std. 10 T 2 stage Potentiometers----- B 1K 0.96K .63" 3/8" 1/8" Flat 3/4 T -- Bottom (401-F)----- --- ----- 8.64K .63" 9/16" 1/4" Flat 3/4 T -- Top CTS p&r 100K 93.4K .93" 1 1/8" 1/4" Flat 3/4 T -- (B) 220330-2 1377444CTS " " 94.9K " " " " " " (T) " BB 104 500K 561.8K .93" 3" 1/4" Flt. Knrl. 3/4 T -- (B)BB " " 550.6K " " " " " -- (T) Claro.-- 250K 237.6K 1.12" 3/8" 1/4" Flat 3/4 T (B) 5905-539-4404 Claro. " " 10.3K " " " " " " (T) 140-6142 Triple Stage PotentiometersCTS TV-4 --- 11.7K .93" 1/4" 1/4" Std. 3/4 T -- (M)1377317 052-067CTS " " 21K " 3/8" 0.18" " " " (T) "CTS " " .53Ω " X X X X -- (B) " I tried to decipher the numbers and letters on the above potentiometers but as you probably know, that can and was a nightmare. Each and every potentiometer was tested by me personally. I listed both the intended value and what it tested at. Some didn't have intended values. There is one potentiometer in there that is AC only. Watch out for it. The triple potentiometers were measured middle first, top next and the two contacts on the bottom last.These potentiometers will be sealed in the Flat Rate Box that they will be shipped in, just as soon as I finish listing them. Please do not write for more information. I have listed all the info I have. Thank you for taking the time to look and read all of this. Please read all that is below, it could end up being very important to you. Disclaimer: I don't know an awful lot about potentiometers. I understand what they are supposed to do all right, and I have wired a couple into circuits but that's about it. In this listing I will give you the information that I have which is usually what is printed on the pot..., or on the box if I have one. When I test them, I first turn the shaft to see how many turns there are from one side to the other. Then I take my multimeter, set to "auto" for continuity. I put one lead on the center tang and the other lead on either side tang. Then I turn the shaft all the way and watch the read out. If it has a different readout than I started with I assume it works. Then I do the same for the other side. If this method is not good enough for you then I suggest that you have two options. 1) Don't buy the items. 2) Send me a message telling me how you think it should be tested. Other than that, there isn't much I can do so you are on your own from there. I won't be taking any back because you don't think it works. If that's not ok with you, please move on to something else. Policy:Item # 1. All sales are considered final within 24 hours of when the shipping company declares the item delivered or our representative declares it finished. Items for Sale:Descriptions and photos are made for your information. We try to be as accurate as possible and in most cases, we have no other information available. However, if you do have a question, please message us through the listing for fastest action. Shipping:We ship economically primarily through the USPS (Post Office). We will combine auction items for shipping to reduce shipping charges if we are aware that you have multiple purchases prior to package final preparation. To have the best chance of reducing charges, be sure to message us prior to or at the time of checkout. Special handling requires additional work and will be charged to you. We will always do the best we can, but if we cannot accommodate you, all items will fall under normal terms as stated in the listing. Sales:All sales are considered final at the time checkout happens. We do not sell anything that would carry a useable factory warranty or guarantee. Therefore, we do not offer returns or refunds. Any exceptions must have proper written authority. What we do offer is our word that we will take care of any problem that is handled fairly on your side and within our power to accomplish. However, we are not in business to give things away nor do we wish to work for nothing. If you have a legitimate problem, by all means contact us through the listing and we will do our best to help you solve it fairly. If we cannot agree on a solution, we will always fall back on item #1 under policy.Note: Changing one's mind is not a reason for exceptions, period. Feedback:We enjoy a 100% positive feedback rating because we earn it. We hope you feel the same. Therefore, we will post positive feedback at the time we ship your order. We request that when you receive your order (Our transaction is considered complete 24 hours after we are notified that your order has been delivered) that you check it over carefully to be sure that it is precisely what we described and showed in the photos. As soon as you have determined that everything is ok, please stop and post positive feedback. Even the best of us can forget to post feedback but beware, feedback can work both ways. If you short us on feedback you can expect to see the results in your feedback rating. The Finish:We are a Christian family outfit, and we strive to uphold the highest standards in all that we do. If you have an issue with us, please allow us to prove it.Thank You Doug Fisk ><> :) dba: vintageelectronicpartsguy here on Ebay

Price: 28.8 USD

Location: Rimrock, Arizona

End Time: 2023-11-05T00:25:23.000Z

Shipping Cost: 10.2 USD