JAMES TYLER Japan Tylerbastar HD Rear Route HSH (Transparent Jimburst) SN.J24096

Description: Description JAMES TYLER Japan Tylerbastar HD Rear Route HSH (Transparent Jimburst) [SN.J24096] A rear-route Tyler Buster equipped with a direct-mount pickup, tremolo bridge, and mid-boost circuit! This guitar has a beautiful maple top and rare Honduras mahogany body. The quarter-sawn maple neck is fully processed and adjusted to suit the Japanese climate, and the fingerboard is made of Indian rosewood. The Extra Thin 59 neck shape, which is excellent for playability, is made using a jig measured from a USA product. The hand-shaped neck is the same grip as the USA-made JAMES TYLER. The fingerboard sides have a smooth scalloped edge treatment, the fingerboard radius is 11R, and the frets are Jescar jumbo size. The joint between the body and neck is heel-cut at a slant. It is a finish that all players will find stress-free and excellent playability in high positions. While the natural sound is clear and responsive, you can clearly feel that the body and neck amplify Tyler's unique, brilliant sound. The bridge is equipped with a G2TS based on the Gotoh T-block model, with saddles engraved with JAMES TYLER. The combination of the unit, which has excellent tuning stability and allows for smooth arm movements, and the pressed saddles that produce vintage-like overtones is flawless and can be said to be perfect. The nut is made of smooth Black Tusk, and the pegs are equipped with Hip Shot locking pegs. In addition to tuning stability, it is an immediate use specification that allows you to change strings immediately. In addition, the locking pegs and T-block bridge reduce the tension of the strings, resulting in an exquisite string tension that improves playability and creates a long sustain. The pickups are James Tyler's original HSH specification. The neck is equipped with a vintage-like low-power model Retro, the middle is equipped with a JTS5500 that features power and clear sound that is not inferior to a humbucker, and the bridge is equipped with a mid-power, clear and separated Secret. The center position of the pickup selector is a super switch specification that outputs a mixed tone of the neck and bridge. The switches, pots, jacks and wiring materials are made of the same parts and materials as the original USA. The volume pot is equipped with a high-pass capacitor, and it is a control that leaves a clear high range without high drop even when the volume is turned down. This model also uses a mid-boost circuit and master tone, so you can intuitively control the high cut and balance the tone of the single coil and humbucker. The mid-boost circuit can be switched ON-OFF with a push switch. It can be used to make a fat sound by adding mid-low range or to extend sustain in lead play, and a variety of sounds can be made by using it in conjunction with the volume control. When the mid-boost is ON, the output of the pickup is improved even when the boost control is zero. The expanded range of compression achieved by passing through an active circuit is also an essential element of the Tyler sound. Even if the battery runs out, you can bypass the circuit and use the guitar in normal passive mode. The attention to detail and quality are so faithful to the original that it's hard to believe it's a Japanese custom guitar. Don't miss out on James Tyler Guitars Japan, a guitar brand that feels right in your hand and is a long-lasting partner! [About James Tyler Guitars Japan] James Tyler Guitars Japan was started when James Tyler proposed that he "make JTG guitars that reflect his ideas as a guitar designer with Japan's excellent technical capabilities." The first step in the production process was to obtain high-precision 3D CAD data, which is the heart of James Tyler's guitar design. Based on that data, we began by considering how to combine it with the excellent technical capabilities of the guitar factory "Asuka." After creating several prototypes with attention to detail and going through repeated trial and error, the final check was done by James Tyler himself at the JAMES TYLER GUITARS Factory in L.A. There, the quality was so high that James Tyler exclaimed, "Are you really going to take it to the extreme? It's perfect!" New products are still made using the same process since the product was released, and we are proud to recommend these guitars to all guitar players. That is James Tyler Guitars Japan. SPEC Body: Flamed Maple(Top)， Honduras Mahogany(Back) Neck Wood: Quartersawn Maple Neck Shape: Extra Thin 59-Shape (0.790 inch @1st Fret， 0.915 inch @12th Fret) Fingerboard: Slab-Lam East Indian Rosewood， 11 Radius Nut Width: 1.625 inch (41.275mm) Frets: 22F， Wide/Tall (.110 inch × .055 inch / 2.8mm × 1.45mm) Scale Length: 25.5 inch (64.77 cm) Tuners: Hipshot Locking Pickups: Retro(Neck)，JTS5500(Middle)， Secret(Bridge) Bridge: G2TS String Spacing at Bridge: 0.413 inch (10.5mm) Control: 5-way Lever PU Selector， Master Volume， Master Tone， Mid Boost Control + Mid Boost Bypass Button Finish: Urethane Strings: 10-46 Includes SKB hard case with Japan original logo Payment Please pay within 4 days after purchase. Shipping Please refer to Shipping and handling.About other area, please ask me. Returns Returns are accepted ONLY if the item was not the item described. International Buyers - Please Note: * Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. * Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. * These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges.

Price: 3826.04 USD

Location: Jpan

End Time: 2025-01-17T05:26:19.000Z

Shipping Cost: 70 USD