JBL JRX225 Dual 15" 4000w DJ/PA Speakers+Powered 14-Channel Mixer w/USB/Effects

Description: Car Audio & VideoPro AudioMarine AudioLighting Karaoke Home/Portable Audio Package: (2) JBL JRX225 Dual 15" Two-Way Passive DJ/PA Speaker With a 2.5" Low Frequency Driver and Pole Mount Socket + (1) Rockville RPM1470 14-Channel 6000 Watt Powered Mixer, 7 Band EQ, 24-Bit Effects, USB, Bluetooth, and 48V Phantom Power --> Click Thumbnails to Enlarge Condition and Warranty Condition: BRAND NEW IN ORIGINAL PACKAGING Warranty: 2 YEAR MANUFACTURER Product Description Package Includes: (2) JBL JRX225 Dual 15" Professional 2000 Watt Passive DJ/PA Speaker 4 Ohm JRX 225 (1) Rockville RPM1470 14 Channel 6000w Powered Mixer w/USB, Effects/14 XDR2 Mic Pres Features: JBL JRX225 Dual 15" 2000 Watt Passive DJ/PA Speaker Dual JBL low frequency drivers with a 64 mm (2.5 in) diameter edgewound ribbon voice coil for greater efficiency and power handling. JBL 2414H-C 25 mm (1 in) polymer diaphragm compression driver Advanced network topology crossover design High-voltage capacitors and inductors with massive cores and heavy gauge wire Progressive Transition™ high frequency waveguide 19 mm (.75 in) MDF (Medium Density Fiberboard) enclosure SonicGuard™ protects the high frequency driver from excess power without interrupting the performance. Non-resonant, all-steel handles 18-gauge hexagon perforated, steel grille Dual-angle pole-mount socket allows the speaker to tilt 10° Details: Power Rating : 500 W / 2000 WFrequency Range (-10 dB) : 42 Hz - 18 kHzFrequency Response (±3 dB) : 62 Hz - 13 kHzSensitivity (1w/1m) : 100 dB SPLNominal Impedance : 4 ohmsRecommended Amplifier Power : 500 W to 1000 W into 4 ohmsMaximum SPL : 133 dBNominal Dispersion : 90º x 50ºCrossover Frequency : 2.2 kHzDimensions (H x W x D) : 1092 mm x 464 mm x 432 mm (43 in x 18.3 in x 17 in)Weight : 42.6 kg (94 lb)High Frequency Driver : JBL 2414H-C , 1" exit compression driver mounted on Progressive Transition™ WaveguideLow Frequency Driver : JBL M115-8A x 2Input Connectors : Neutrik® Speakon® NL-4 (x1); .25 in TS phone jack (x1); parallelGrille : 18-gauge, powder-coated steel All About Your RPM1470: How To Set Up Your RPM1470: Inputs, Outputs, and Controls Explained on Your RPM1470: How To Connect an Instrument Or Mic to your RPM1470: How To Set Up For Karaoke with Your RPM1470: How To Connect a Subwoofer to Your RPM1470: Video of RPM1470: Description of RPM1470: The Rockville RPM1470 is a 14-channel powered console mixer with USB input and Bluetooth. There were a few goals we had when designing this mixer. The first one was it had to have the clearest sound quality with the best quality mic preamps. We manufactured this mixer with XDR2 low noise mic preamps. These are some of the best sounding mic pre’s on the market. They compete in quality with any brand on the market! The next goal we had was versatility. This mixer has aux sends and returns on each channel so you can route your external effects easily. We also built in a 24-bit digital effects processor that sounds great. We didn’t include 99 effects which all sound the same. Rather we included 16 solid effects that are each useful. You can customize each effect in the FX control section of the mixer. The last goal was to include a built-in amplifier that is powerful enough for your main speakers so that you can use this mixer for large events with over 500 guests. We tested this and we ran the mixer to (2) Mackie C300Z speakers, and even with the volume turned up half way these were filling an extremely large room with sound! We also tested these with dual 15” DJ speakers and really cranked them and the sound of the highs and lows were crisp and clean. The great thing about this is the amp does not overheat even when cranking it for hours straight. The power amp built into this mixer is 500 x 2 RMS @ 8 ohms and 750 x 2 RMS @ 4 ohms. We rate the RMS very strictly the way famous brands like Mackie rate their items. We also supply you with program and peak ratings, but RMS is the true continuous output power you should look at. Other great features are a dual 7-band master EQ, a 4-band EQ on each channel, an EQ kill switch, and pad and solo buttons on each channel. Rounding things out, we added a USB input that has 2 functions. It can play back your audio tracks. But what is really cool, is that you can record your main mix onto the USB or onto an SD! We also added Bluetooth to this mixer to give you all the latest and greatest options. 90 Day Money Back Guarantee The price point we are selling this at is about a third of what any other brand would charge. On top of this, we are offering a 90 day money back guarantee including return shipping. Ifyou do not love this mixer, you can send it back and get all your money back and we will even cover the cost of return shipping. Just be sure to send it back including the original packaging. Features: Rockville RPM1470 14-Channel 6000 Watt Powered Mixer, 7 Band EQ, 24-Bit Effects, USB, Bluetooth, and 48V Phantom Power RMS Power Output: 750 Watts x 2 @ 4 Ohm 500 Watts x 2 @ 8 Ohm Program Power Output: 1500 Watts x 2 @ 4 Ohm 1000 Watts x 2 @ 8 Ohm Peak Power Output: 3000 Watts x 2 @ 4 Ohm 2000 Watts x 2 @ 8 Ohm 14 Channel mixer section: 12 mono channels, 1 stereo channel 14 high-quality XDR2 mic preamps with switchable +48 V phantom power for condenser microphones XDR2 mic preamps are low-noise and low distortion. These are some of the best sounding mic pre’s on the market Built in USB allows you to play songs from your computer or a thumb drive Built in recording - allows you to record your main mix onto the USB or SD card USB supported formats are MP3, WAV, WMA Built in advanced bluetooth wireless audio streaming with the most reliable Bluetooth chip on the market 24 BIT digital effects processor with 16 preset digital effects including (reverb, chorus,, delay, chorus, phaser, flanger and various multi-effects)Effects level control can adjust signal level of each effect Effects mute buttonFX footswitch input lets you turn your effects on or off4-Band EQ (high, high-mid, low-mid, low) per channel Each channel is equipped with pad, must, and solo buttons with LED’s Each channel has gain, aux control, FX control, Pan control, Volume control Peak LED indicator has a red LED that indicates a signal level that is 5dB below clipping Dual Stereo 7-band Graphic EQ allows for precise frequency correction of monitor and main outputs (with EQ kill switch) Aux send and Aux returns on every channel to connect all types of external effects and processors You can control your monitor mix and check levels through your headphones Limit L and Limit R LED indicators. These limiters are designed to go brighter as clipping gets stronger and will remain lit up until the channels stop clipping. We recommend lowering the gain if you see these LED’s lit up Power and Output level LED indicators Main output fader allows you to fade the sound between the left and right channel RCA input, RCA output, and USB player Headphone jack for monitoring the master signal and individually monitoring each channel with PFL, L/R Gain control adjusts he sensitivity from -60dB to -20dB when the pad button is in the out position. When the pad button is pressed in the gain will adjust from 240dB to 0dB Solo button allows you to hear the signals through your headphones or to the control room without having to route them to the main mix. This works even with the fader turned down. You can use this to preview channels before they are let into the mix or just to check out a channel during a live performance. You can solo as many channels at a time as you want Built in cooling fan and ventilation system USB input supports unlimited capacity (as many GB as you want) 110/220V switchable power supply Product Dimensions (L x W x H): 22.44” x 17.72” x 7.09” inches Weight: 37.48 Lbs. Return Policy AudioSavings Return Policy: At Audiosavings, we strongly believe in customer satisfaction and therefore offer free return shipping within 30 days of purchase on all items returned to us within the continental USA. Prior to returning merchandise, contact us and we will give you a return authorization # and a return label. You may return this item for a refund within 30 DAYS of purchase. Warranty Repair/Exchange Period: 2 YEAR If your item is defective or you want to return it for any reason within the first 30 days of when it was delivered to you; you have the following options: We will send you a pre-paid shipping label to replace the item for a brand new one. We will send you a pre-paid shipping label to exchange the item for another item of your choice. If the item you chose is more or less money we will work out the price difference with you. If you are returning a working item in used condition for a refund there will be a 20% used item fee deducted from your refund. All replacements and exchanges are free. Replacement/Processing Time: Your replacement or refund will process within 3-5 business days of when we receive the item. Please note items with physical damage un-related to shipping are not covered under warranty. Registered software cannot be returned. You MUST notify us within 48 hours if you receive an item that was damaged during shipping. Process for returning items Please email us with your eBay user ID, Item code / model #, Condition of the item, and the reason for your return. Please also indicate whether you would like a replacement, an exchange, or a refund. We will supply you with a reference number (RMA #) to put on the package which will ensure quick processing of your return. All returns require a RMA# to be returned back to our facility. Item Code: (2) JRX225+RPM1470 Home / About Us / Contact Us / Returns / FAQ's Copyright © 2016 Audio Savings, All rights reserved. | eBay Template Design

Price: 1389.85 USD

Location: Inwood, New York

End Time: 2024-02-29T01:16:35.000Z

Shipping Cost: 0 USD