JVCC FELT-065 Polyester Felt Tape: 3/4 in. x 50 ft. (1.5mm thickness, Black)

Description: Product HighlightsJVCC FELT-065 Polyester Felt Tape is a 1.5mm (approximately 1/16 inch) thick synthetic needle punched felt made from polyester fibers. One side is felt, and the other side has adhesive. Commonly used for joining and temporarily repairing fabric, curtains and cloth drapes in backdrops. Felt material is also used for filtration applications, gaskets, wipers, and padding in a wide variety of industries. On many of the adhesive felt products the rolls will have an approximately 2-inch to 4-inch leader of double-sided film tape applied to the release liner before the felt material starts. We recommend you either cut a small piece of felt off at the beginning of the roll with a pair of scissors to start, or peel the double-sided film tape off of the release liner to use as a way to begin applying the felt (try not to pull the double-sided film tape off of the felt backing though).JVCC FELT-065 hides seams being photographed and is used for applying a clean, dark edge to platforms, flats, and portals. The tape can also be used to create matte borders or edges and to line display and jewelry cases. Carrier/Backing: non-woven polyester felt. Adhesive: synthetic rubber. Release Liner: paper (reverse wound). Thickness: 69 mils (carrier, adhesive, liner) 59 mils (carrier, adhesive) 10 mils (liner). Adhesion: 130 ounces per inch (to stainless steel test panel). Service/Operating Temperature: -30F to 150F. Application Temperature: 60F (minimum). Core: 3-inch diameter. JVCC FELT-065 Polyester Felt Tape is a 1.5mm (approximately 1/16 inch) thick synthetic needle punched felt made from polyester fibers. One side is felt, and the other side has adhesive. Commonly used for joining and temporarily repairing fabric, curtains and cloth drapes in backdrops. Felt material is also used for filtration applications, gaskets, wipers, and padding in a wide variety of industries. JVCC FELT-065 hides seams being photographed and is used for applying a clean, dark edge to platforms, flats, and portals. Can also be used to create matte borders or edges and to line display and jewelry cases. Made in the U.S.Application Instructions On many of the adhesive felt products the rolls will have an approximately 2-inch to 4-inch leader of double-sided film tape applied to the release liner before the felt material starts. We recommend you either cut a small piece of felt off at the beginning of the roll with a pair of scissors to start, or peel the double-sided film tape off of the release liner to use as a way to begin applying the felt (try not to pull the double-sided film tape off of the felt backing though). Technical Information- Core: 3 inch diameter - Backing/Carrier: non-woven polyester felt - Adhesive: synthetic rubber - Release Liner: paper (reverse wound) - Thickness: 69 mils (carrier, adhesive, liner) 59 mils (carrier, adhesive) 10 mils (liner) - Adhesion: 130 ounces per inch (to stainless steel test panel) - Application Temperature: 60F (minimum) - Service/Operating Temperature: -30F to 150F

Price: 16.41 USD

Location: Skillman, New Jersey

End Time: 2024-02-26T01:34:27.000Z

Shipping Cost: N/A USD