JVCC V-36P Premium Colored Vinyl Tape: 1/2 in. x 36 yds. (White)

Description: Product HighlightsThis high-quality vinyl tape is available in many colors and is suitable for a wide variety of uses in indoor public, commercial and industrial settings. JVCC V-36P vinyl tape is also known as Splice Tape, Dance Floor Tape and Marley Tape. This colored vinyl tape is also perfect for marking parts and accessories and color coding cell phones and other devices with their accompanying chargers and accessories.Tape rolls are typically cut to standard tape industry metric-cut sizes - or approx 5% narrower than the nominal size (i.e. 24mm per 1-inch of nominal width ordered).Adhesive: synthetic rubber resin. Carrier/Backing: soft polyvinyl chloride (SPVC) film. Thickness: 6 mils (carrier, adhesive). Adhesion: 22 ounces per inch (to stainless steel test panel). Tensile Strength: 16 pounds per inch (longitudinal)Service/Operating Temperature: -20°F to 176°F. Elongation: 150%. Standards Met: CID A-A-1689B Type II (cancelled PPP-T-66E Type 1 Class 2). Core: 3 inch diameter neutral JVCC V-36P Premium Colored Vinyl Tape is a superior quality vinyl tape used for color coding; lane marking and safety coding to meet OSHA requirements; temporary decorating and striping on vehicles, boats and sporting equipment. Also to identify restricted or hazardous areas; masking for hard chrome plating and anodizing; harness and pipe wrapping; and duct and joint sealing. JVCC V-36P Vinyl Tape is also known as Dance Floor Tape, Marley Tape, or Splice Tape and it is 1 mil thicker and has 25% more adhesion than regular JVCC V-36 Vinyl Tape which gives it its premium name. Features & Benefits "Write-on" capability. Provides very effective vapor/moisture barrier. Highly conformable and good abrasion/impact/rupture resistance. Resistant to aging, sun, water and oil. No corrosion to copper, brass, steel, or aluminum. NOTES: Sizes shipped will typically be the tape industry standard metric-cut sizes, i.e. 24mm for each 1 inch of nominal tape width ordered (rolls are approximately 5% narrower than the nominal size). This product's actual size is 12mm wide. This tape is typically cut to width from log rolls so most sizes ship on non-branded plain white cores. As with any adhesive tape product it is always the user's responsibility to determine that the product is suitable for their intended use; e.g. if you want to remove a product cleanly from a specific type of substrate please test on an inconspicuous area first. Warning: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/. Technical Information- Core: 3 inch diameter neutral - Backing/Carrier: soft polyvinyl chloride (SPVC) film - Adhesive: synthetic rubber resin - Standards Met: CID A-A-1689B Type II (cancelled PPP-T-66E Type 1 Class 2) - Thickness: 6 mils (carrier, adhesive) - Adhesion: 22 ounces per inch (to stainless steel test panel) - Tensile Strength: 16 pounds per inch (longitudinal) - Service/Operating Temperature: -20F to 176F - Elongation: 150 %

Price: 4.58 USD

Location: Fairless Hills, Pennsylvania

End Time: 2024-12-20T23:29:52.000Z

Shipping Cost: N/A USD