Description: Up for sale is a NEW Lexjet Toughcoat thrifty banner TBAN42 42" x 40ft. 1 Roll (2" core) (Q3) LexJet TOUGHcoat™ ThriftyBanner is compatible with all aqueous inkjet printers, whether they use dye or pigment inks or thermal or piezo printheads.Technical SpecificationsProduct TypeInkjet Printable MediaThickness16 milPaper Weight450 gsmApplications - MediaBannersTemporary Outdoor SignageFinishMatteInk TypeAqueousMedia TypeVinyl: BannerBannerPropertiesDescriptionMaterialTear-resistant polyester fabric embedded between two white vinyl layersGauge 16 milBasis Weight450gWhite Point≥ 130 (CIE)Opacity>95Gloss Level @ 60°19.2 ± 5L*a*b* Color SpaceL* = 93.27, a*= -0.56, b*= -1.47 Printer/Ink CompatibilityCompatible with all thermal and piezo inkjet printers using water-based dye and pigment-based inks.Imaging SideMaterial is packaged with printable side facing up. Printable surface can be identified by a slight tackiness.Software SettingsThe coating on this product is engineered for better than 250% ink coverage. A Heavy Weight Coated setting is the recommended starting point. However, we recommend a custom ICC profile for optimal results. Please refer to www.lexjet.com for starting-point ICC profiles for some printers.Finishing/Post Processing Pressure-sensitive vinyl laminates, like LexJet Elite UV Vinyl, can be applied to increase the fade and abrasion resistance of the image. Before applying the laminate, allow the image to dry for 24 hours.Light FastnessThe fading time of inkjet ink is a direct result of the inks that you choose to use and the environment where the print is displayed. Contact the ink manufacturer for light-fastness data.Water Resistance and Surface ProtectionTo obtain a high degree of water resistance, use only pigmented ink. Allow the print to dry for 24 hours before exposing to moisture. Lamination is not required. Ink saturation over 250% can affect the waterfast properties and show ink bleed. Dye-based inks will yield good color gamut, but bleeding may occur when the image gets wet. Over laminating dye-based ink will not eliminate image bleed, unless the material is completely sealed to a non-porous surface. To avoid perforating the laminate, use banner tape instead of sewing (see below). Dirt and stains cannot be cleaned from the imaged surface and the surface can be damaged from excessive folding or creasing.HemmingBanner tape can be used and is preferred to sewing because the sewing process can scratch the coating. If sewing, a double-stitched hem is recommended with a maximum of five stitches per inch.GrommetingGrommets should be placed in the hemline along the length of the banner so that the grommet is through two layers. Corner grommets should be placed where the length and width hems cross, so that the grommet is through four layers. A reinforced corner is also recommended to increase durability.
Price: 129.99 USD
Location: Florence, Missouri
End Time: 2024-02-15T19:46:42.000Z
Shipping Cost: N/A USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Seller
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Brand: LexJet
Unit Type: ft
Model: 42 in x 40 ft - 1 Roll (2 in Core)
MPN: TBAN42
Country/Region of Manufacture: China
