LGM30-0404 LOAD GENIE MARK III UNLOADER FOR GAS POWERED AIR COMPRESSORS 1/2''

Description: Normal 0 false false false EN-US X-NONE X-NONE Dear valued customer, We normally keep all our eBay store inventory in stock. However, due to backorders from many of our vendors and parts shortages, some items that we have listed may not be in stock or could have a long lead time although they show as available on our store. If you purchase something and there may be a long lead time or it may not be available, we will notify you right away. We are a small family owned business trying to keep up with the largest global parts shortage we have seen in our 38 years of business. We are never attempting to deceive by saying we have an item in stock. Sometimes our vendors just don't have all the parts available to build something that we normally drop ship and unfortunately we cannot keep up with all of our vendors inventory at all times. If you are needing something right away, we encourage you to message us to check availability. We can also expedite stock items if needed. Thanks for your understanding and patience. Home About us Listings Feedback Contact Hassle Free Returns 100% Satisfaction Guaranteed Top Quality Parts Menu Store Categories Air Compressors Air Dryers Air Filter Elements Air Oil Separators Automatic Tank Drains Check Valves Compressor Motors Compressor Oil Compressor Pumps Compressor Repair Parts Desiccant Air Dryers Filters, Regulators, Lubricators Magnetic Starters Oil Filters Pressure Switches Prevost Air Fittings Rebuild Kits Rotary Screw Parts Vacuum Pump Parts LGM30-0404 LOAD GENIE MARK III LGM 30 SERIES FOR GAS POWERED AIR COMPRESSORS 1/2'' Click on Thumbnails to Enlarge The LGM 30 - Mark III continues the tradition of the original Mark II. 25 years of experience were incorporated into the design and development of this continuous run control. The Mark III combines all components required for a continuous run compressor application: the pilot valve, the vent valve, and the check valve. Since the Mark III is a "vent" unloader, built-in compressor head unloaders are not required. The compact size and straight-through flow design of the Mark III make installation easy. Simply install the Mark III into the air receiver, and attach the compressor discharge line to the valve inlet. The Mark III is suitable for compressors of up to 30 SCFM delivery. Cut-in and cut-out pressure settings are factory set to customer specifications. Minimum cut-out pressure is 250 PSI. If no setting is specified, the valve is set at our standard setting of 115 PSI cut-out and 95 PSI cut-in. The valve is also field adjustable. Details of construction include a forged brass body, zinc-plated steel internal components, fluorocarbon piston ring, stainless steel springs, and a glass-filled fluropolymer check valve poppet. Options include a 1/8" NPT tapped port for throttle control of a gas engine, a lockout clip for "dual control" applications, a special 1/8" NPT tapped port for pressure switch unloader valve, a vent port muffler, and a toggle unloading lever for one-hand warm up control. Vibra-Seal pre-applied thread sealant is also available on external inlet pipe threads. REPAIR PARTS CHECK VALVE UNLOADER FOR GAS POWERED AIR COMPRESSORS, INCLUDES MUFFLER PART#: LGM30-0404 LOAD GENIE MARK III UNLOADER CHECK VALVE. Features:Application: self contained unloading valve can be used wherever a continuous run air compressor is required.Combines all components required for continuous run compressors: pilot valve, vent valve, & check valve.Eliminates the need for built in head unloadersEasy installation: install the Mark III into the receiver and attach the compressor discharge line to the valve inlet.Construction: forged brass body, zinc plated steel internal components fluorocarbon piston ring, stainless steel springs and a glass filled fluoropolymer check valve poppet.Tapped & plugged 1/8" port for throttle control of a gas engine1/8 NPT tapped port for pressure switch unloader valve and vent port muffler.A toggle unloading lever for one hand warm up control.Suitable for compressor up to 30 SCFM. Specs:1/2" X 1/2" FNPT 95-115 PSI Minimum cut-in: 60 PSI Maximum cut-out: 250 PSI [ Factory Set 95 Psi Cut In, 115 Psi Cut Out ] Payment Shipping Returns Contact us Sales tax California Residents Warning Payment We accept PayPal and all major credit cards. Shipping Please see shipping and payments tab to calculate freight if necessary. We pride ourselves on our fast shipping. All stocked orders will be packaged and shipped within 24 hours of payment Monday through Friday. We are closed on the weekends and major holidays. All in stock orders placed by 3 P.M. PST will be shipped the same day. We provide expedited shipping if requested and we also have fast response times if you have any other questions. Return We accept returns within 30 days of purchase. If you receive a defective item there is no fee to exchange. Contact us Contact us with any questions you have about your purchase or if you need help identifying a product that you need. We always respond within 24 hours on business days. Sales tax Pacific Air Compressors is located in Oregon and we do not charge sales tax on any items purchased on our eBay store. If you are charged sales tax, please contact eBay support as they are the ones to collect sales tax based on your state laws. California Residents Warning California Residents Warning: This product contains or may contain chemicals including lead known in the state of California to cause cancer, birth defects, or other reproductive harm. We suggest washing hands after handling. California law requires this warning be given to all customers in the state of California. (California Health and Safety Code 25249.5 et seq.) Home About us Listings Feedback Contact Copyright © 2017 Pacific Air Compressors. All Rights Reserved. | eBay Store Design by OCDesignsOnline

Price: 61.24 USD

Location: Portland, Oregon

End Time: 2023-12-01T16:49:05.000Z

Shipping Cost: 0 USD