Description: Communication is all about being clear, the LT800 is a great communicator. Able to transmit on 57 channels to beltpacks, stationary receivers or wireless speaker receivers, the LT800 makes a versatile centerpiece for almost any assistive listening system. Balanced and unbalanced inputs allow flexibility when choosing an audio source while an internal auto processor optimizes the audio for transmission to ensure superior audio quality. Channel status, selection, and programming can be monitored at a glance via the front panel LCD display. There's even a VU level meter with a test tone so you can dial in the correct levels to avoid noise and distortion. Make sure they hear everything, make sure it comes from the LT800. The LT800-216 transmits only in the 216 MHz frequency range.IncludesOne LT-800 Stationary RF Transmitter (216 MHz)One LA-207 Power Supply for LT-800One Line CordOne Quick reference cardFeaturesLook & Listen (TM) LCD display for quick channel, programming, and channel lock status informationBalanced and unbalanced audio inputs allow for use with any audio sourceBuilt-in auto processor optimizes audio (voice or music) prior to transmission57 available, selectable channelsVU level meter and test tone for simple installation and set upSpecificationsFrequency Response 50 Hz - 15 kHz (±3 dB)Signal-to-Noise Ratio SQ enabled 80 dB, SQ disabled 60 dBAudio Input 1 Rear panel, one (1) Female XLR or 1/4 in combo connector, balanced, 0 / -55 dBu (line/mic) nominal input level adjustable, -30 / +21 dBu (line/mic) maximum input level, impedance 20k / 1k ohm (line/mic), phantom power +12 VDCAudio Input 2 Rear panel, two (2) phono connectors, unbalanced, -10 / +10 dBu nominal input level adjustable, +30 dBu maximum, impedance 100k ohmAudio Processing Compression can be turned on/off, slope internally adjustable from 1:1 to 4:1, default 2:1Contour Cuts and boosts frequencies above 5 kHzDistortionAudio Output Input 1 and input 2, mixed output (rear panel), two (2) phono connectors, unbalanced, -10 dBu nominal output level, +15 dBu maximum, impedance 10 ohmHeadphone Output Front panel, one (1) 3.5 mm (0.14 in.) stereo connector, unbalanced, adjustable output level, +3 dBu maximum, impedance 10 ohmUser Controls Front Panel: Power, test tone on/off, channel up/down, input levels, mix level, contour, monitor volume controlRear Panel: Input 1 Level, (Line, Mic, Mic- Phantom Power), Input 2 level (-10 / +10 dBu), RF power level (low, mid, high)Internal Adjustments Compression ratio for audio processorProgramming SQ on/off, process on/off, channel lockIndicatorsLCD Channel designation, lock status, RF power level, programming (front panel)Audio Input Status LEDs Indicates Input 1, Input 2, and Mix audio levels; 10 segment LED's (8 green, 2 red)Processing Indicated by a green LED when on (front panel)Test Tone Red LED illuminates when test tone is enabled.RF Power Indicated on the LCD (low, mid, high)RFFrequency Range 216.0125 - 216.9875 MHzNumber of Channels 17 wide band, 40 narrow bandFrequency Accuracy ± .005% stability +32º to +122 ºF (0º to +50 ºC)Antenna Type Various antennas availableTransmitter Stability 50 PPMTransmission Range Up to 305 m (1,000 ft.)Antenna Connector BNCOutput Power 80,000 uV at 3 mNumber of Simultaneous Transmitters 6PowerPower Supply In line power supply, Listen part number LA-207 (Line cord is determined bythe each Country's AC power standards)Power Supply Input 100-240 VAC, 50-60 Hz, 0.4 APower Supply Output 12 VDC, 1.3 A, 15.6 WPower Supply Connector 0.02 in (5.0 mm) OD, 0.01 in. (2.5 mm) ID, barrel typeCompliance UL, CE, GS, TÜV, RoHSPhysicalWidth 21.5 cm (8.50 in.)Height 4.5 cm (1.75 in.)Depth 23 cm (9.13 in.)Color Black with grey silk screeningUnit Weight with Power Supply 1.6 kg (3.5 lbs.)Shipping Weight 2.7 kg (6.0 lbs.)Rack Mounting One (1) rack space height, 1/2 rack space wide. One (1) or two (2) transmitterscan be mounted in one rack space, optional rack mount (LA-326)Weight 1.2 kg (2.6 lbs.)Note
Price: 849 USD
Location: Verona, Wisconsin
End Time: 2024-08-28T17:57:46.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Return policy details:
Brand: Listen Technologies
MPN: LT800-216
Type: Signal Processors
Model: LT800-216