Lot 4 Cherry D44 Lever MicroSwitches, Micro Switches, 2-Pole A44LRWAT Automation

Description: 2124A3G.13 Brand New Cherry Dual D44 Series 10A Miniature Snap Action Lever Switches, 125VAC /250VAC 2-Pole, Part Number A44L-RWAT, or A44LRWAT; Series No. D4. Each bid quantity is for a Lot of Four (4) 2-Piece Switch Assembles. You may bid / buy any number of lots, up to the total quantity available above. These were purchased at an electronics auction earlier this year, and they were brand new in the original factory boxes. We repackaged them in heavy ziplock bags for resale, and so they will ship fast and cheap. Top quality switches from a great manufacturer. If so desired, each switch assembly can be separated, so each 4-piece bid lot will yield four (4) switches with levers and four (4) switches with buttons. The switches are held together by two little plastic posts, and can be separated easily by hand. Each switch has three terminals for use with standard 3/16" quick connect terminals. Not only that, but each individual switch can be wired either Normally Open (circuit is energized when lever is pressed) or Normally Closed (circuit is energized until lever is pressed. Thus, one switch assembly can control a 2-pole load, or they can perform two separate functions when the lever is depressed. Example: stopping a garage door in the fully-up position, and simultaneously turning on the lights. Or welcome the "new guy" by rigging one under his chair (lights turn off when the fire siren under his desk turns on). And don't forget, Halloween is just around the corner. Two terminals on one end are marked "NO" and "NC." To change the operation, simply pull your connector off one terminal and slide it on the other. Very versatile little switches with a substantial load rating as well. We don't have a clue what they were originally made for, but they would be ideal for end-of-stroke sensors and a zillion other uses. According to the calipers Overall length: 1.685" Length (excluding lever and terminals): 1.100" Overall width: .788" Overall height: 1.115" Height (excluding lever and terminals): .625" Mounting holes: .975" on centers (OC) for #4 machine screws According to the manufacturer: Specifications Temperature Rating: -40° to +85°C, 125°C or 150°C Flammability Rating: UL94V-O Materials Case: Thermoplastic Polyester (PET) Actuating Button: Thermoplastic Acetal (POM) 85°C Thermoplastic Polyester (PET) 125°C, 150°C Auxiliary Actuator: Stainless Steel Common Terminal: Brass NO/NC Terminals: Brass Moving Blade: Silver-Plated Brass Contacts: Silver Alloy Terminals: Standard 0.187" x 0.020" Long life coil spring, snap action mechanism Mounting Recommended mounting screw: #4-40 round head Recommended torque on screw: with washer 60N cm max CSA File Number: 16503 UL File Number: E314201

Price: 11.99 USD

Location: Springfield, Tennessee

End Time: 2025-01-12T20:46:31.000Z

Shipping Cost: 0 USD