Description: Plug and play with all OSes: Fire up putty for Windows, Minicom or Screen for Mac and Linux to get direct access when you don't have video or network. Microcontrollers typically use 5V TX/RX voltage Single board computers like Raspberry Pi and Libre Computer boards use 3.3V TX/RX Voltage Please select the appropriate IO voltage. Red Wire: 5V Black Wire: Ground White Wire: RX (connect to board TX) Green Wire: TX (connect to board RX) Maximum baud rate: ~2Mbps Cable length: ~1M For Raspberry Pi RASPBERRY PI 3/4 GUIDE: You must open /boot/config.txt or edit config.txt on your MicroSD card and add "enable_uart=1" without quotes in order for this to work for Raspberry Pi 3/4 Model B and Model B+. Otherwise UART is not enabled and will not display anything. CONNECTING TO RASPBERRY PI 40 PIN HEADER: Three pins need to be connected for UART to work, the black ground (GND) wire, the white RX wire, and the green TX wire. Black should be connected to pin 6, white should be connected to pin 8, and green should be connected to pin 10. CONFIGURE BAUD RATE, FLOW CONTROL, PARITY FOR YOUR BOARD: The default baud rate for Raspberry Pi is 115200. Flow control is not supported by the Raspberry Pi 3 so it should be disabled. 8N1 mode must be selected so that there are 8 data bits, no parity, and 1 stop bit. For Libre Computer Please see Libre Computer Board Serial UART Connection and Setup Guide
Price: 9.99 USD
Location: Sicklerville, New Jersey
End Time: 2024-12-24T17:38:55.000Z
Shipping Cost: N/A USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money back or replacement (buyer's choice)
Brand: LoveRPi
Type: Cable
Cable Length: 3 ft
Country/Region of Manufacture: China
UPC: 647923367553
Available Variations
Color: 5V Microcontrollers
Price: 9.99 USD
Available Quantity: 0
Quantity Sold: 0
Color: 3.3V SBCs
Price: 9.99 USD
Available Quantity: 42
Quantity Sold: 2
