Lucas Oil Heavy Duty Oil Stabilizer Engine Liquid Additive Treatment Oil

Description: 1LT Mineral Oil Stabilizer AdditiveHeavy Duty Engine Oil StabilizerA multipurpose based on pure petroleum.Reduces mechanical noise, heat, wear and friction in manual transmissions, differentials, engines.Lucas Oil Stabilizer is the ultimate in heavy-duty, high-performance, a 100% petroleum-derived product developed and perfected through thousands of hours of laboratory and field testing.The result is a proven product capable of satisfying the lubrication needs in various sectors, especially in the Automotive sector but also in the industrial one and in many others.,The Stabilizer additive itself is a specially formulated blend of premium oils plus a variety of petroleum-extracted additives, blended together to create a product that will meet multiple needs simultaneously in an engine, gearbox, various transmissions and differentials or more.In most automotive applications, Lucas Oil Oil Stabilizer is meant to be a supplement to oils.And it must be added to achieve the right degree of viscosity and protectionThe main advantages of Lucas Heavy Duty Oil Stabilizer are as follows:For preventative maintenance, it eliminates starts and dry wear. Increases service life and reduces the maximum oil temperature in any engine, gasoline or diesel. Car, Motorcycle, Truck, Agricultural, NauticalIncreases oil pressure, reduces noise, leaks or leaks, eliminates knocking and compensates for play in worn engines.It also helps reduce noise, overheating, leaks and wear in gearboxes, transmissions, differentialsSince Lucas Heavy Duty Oil Stabilizer is a 100% petroleum based product, it can safely mix with all other automotive lubricants, semi-synthetic mineral and even fully synthetic oils.Lucas Heavy Duty Stabilizer protects against rust, corrosion and dry starts caused by long periods of non-use. Oil treated with Lucas Heavy Duty Oil Stabilizer does not leak from cylinders and gears while maintaining constant lubrication. This product is also excellent for RVs, tractors, construction equipment, boats, military equipment or anything that remains unused for extended periods of time.The Lucas stabilizer can be used from 80% to 100% to correct mechanical problems in heavily worn gearboxes, leaking, overheating or operating under extreme pressure conditions. Lucas Oil Stabilizer should be used 100% on open gears or when maximum adhesion and lubrication action is required. It was used 60% to 100% in many automotive operations where the engines were so worn that a repair would otherwise have been unavoidable.It can be used 100% in such conditions where the pressure and friction are so strong that normal lubricants cannot hold.Lucas Heavy Duty Oil Stabilizer adheres tightly to cylinders to prevent oil from rising and being burned. It isolates and prevents contaminants in the combustion chamber from flowing down to prematurely spoil the oil. By avoiding these infiltrations and dry starts, the life of an already worn engine can be significantly extended.Using Lucas Heavy Duty Oil Stabilizer allows you to safely extend the oil change interval by at least 50%. This fact alone pays for the product, making all other perks a bonus.Lucas Heavy Duty Stabilizer is a perfect lubricant for mechanical assembly and used by many major engine manufacturers. Fully adheres to parts to eliminate dry start which can be harmful to newly rebuilt engines.The negative effects of heat in an engine or gearbox are well known to anyone with a fair level of mechanical knowledge. The Lucas stabilizer is designed to maintain its viscosity (resist dilution) at high temperatures. Ordinary oils often lose their viscosity and adhesion stability as temperatures rise above the point they were designed to work for. Adding Lucas stabilizer to the oil not only allows equipment to run at higher temperatures, it also safeguards motors and bearings by preventing damage or being ruined by overheating.DOSAGE:In the engine, use approximately 20% or 1 L bottle per gallon (3784 L) of any mineral, semi-synthetic or synthetic motor oil.In heavily worn engines, use up to 60 or 80% if necessary.In manual transmissions and in transmission cases generally use 25 to 50%.In differentials use from 25 to 50%In worn or noisy differentials use 50 to 100%.In industrial gearboxes use 25 to 50% for preventative maintenance and lower energy consumption. If necessary, use 50 to 100% to stop leaks and overheating.The concentration of protective additives contained in the Lucas stabilizer is such that in an oil change the ratio for maximum lubrication varies between 20% and 60% in addition to other oils depending on the needs.At this point the whole oil mix becomes much more fluid than just the oil its specific viscosity will adhere perfectly to all mechanical parts thus reducing friction will allow any machine or engine to perform a certain job with less use. power.This condition also creates a drop in temperature which extends the life of oils as well as seals, bearings and other components.In the motorcycle field, in the case of oil bath clutches or in similar cases, the dosage to be added to the oil is 10% maximum.At Ford Powerstrokes we suggest one liter of pure synthetic oil stabilizer for oil change,While with fully synthetic oils such as 5w20, 5w30 etc… we recommend the use of our synthetic oil stabilizerWith even lighter oils such as 0w16, 0w20, 0w30 grades or in vehicles equipped with a viscosity sensor we recommend using our LOW VISCOSITY oil stabilizer.Key Benefits:Increase the life of the oil itself at least 50% moreReduces the oil consumption and reduces lossesDelete the dry startsIncrease the oil pressureIncrease the power and kilometers per literThe Lucas stabilizer can be used from 80% to 100% to correct mechanical problems in heavily worn gearboxes, leaking, overheating or operating under extreme pressure conditions. Lucas Oil Stabilizer should be used 100% on open gears or when maximum adhesion and lubrication action is required. It was used 60% to 100% in many automotive operations where the engines were so worn that a repair would otherwise have been unavoidable. The negative effects of heat in an engine or gearbox are well known to anyone with a fair level of mechanical knowledge. The Lucas stabilizer is designed to maintain its viscosity (resist dilution) at high temperatures. Ordinary oils often lose their viscosity and adhesion stability as temperatures rise above the point they were designed to work for. Adding Lucas sta

Price: 104.29 USD

Location: Taranto, TA

End Time: 2023-10-26T15:45:24.000Z

Shipping Cost: 0 USD