Lucas Oil Stabilizer Resistant 1 Liter Engine Oil Change Additive Fuel

Description: 1LT Additive Stabilizer MINERAL OilHeavy Duty Engine Oil StabilizerA multipurpose based on pure petroleum.Reduces mechanical noise, heat, wear and friction in manual transmissions, differentials, engines.Lucas Oil Oil Stabilizer is the ultimate heavy-duty, high-performance, 100% petroleum-derived product developed and perfected through thousands of hours of laboratory and field testing.The result is a tested product able to satisfy the lubrication needs in various sectors especially in the Automotive but also in the industrial one and in many others.The Stabilizer Additive itself is a specially formulated blend of premium oils plus a variety of petroleum derived additives blended together to create a product that will meet multiple needs at once in an engine, gearbox, transaxle and differential or more.In most automotive applications, Lucas Oil Oil Stabilizer is meant to be a supplement to oils.And it must be added to reach the right degree of viscosity and protectionThe main advantages of Lucas Heavy Duty Oil Stabilizer are as follows:For preventative maintenance, eliminate burnouts and dry wear. Increases life and reduces maximum oil temperature in any engine, petrol or diesel. Cars, Motorcycles, Trucks, Agricultural, NauticalIncreases oil pressure, reduces noise, leaks or blows, eliminates knocking and compensates for backlash in worn engines.It also helps reduce noise, overheating, leaks and wear in gearboxes, transmissions, differentialsBecause Lucas Heavy Duty Oil Stabilizer is a 100% petroleum-based product, it can blend safely with all other automotive lubricants, semi-synthetic mineral and even fully synthetic oils.Lucas Heavy Duty Stabilizer protects against rust, corrosion and dry starts caused by long periods of non-use. Oil treated with Lucas Heavy Duty Oil Stabilizer does not leak from cylinders and gears maintaining constant lubrication. This product is also excellent for RVs, tractors, construction equipment, boats, military equipment, or anything that sits unused for long periods of time.Lucas stabilizer can be used 80% to 100% to correct mechanical problems in gearboxes that are badly worn, leaky, overheated or run under extreme pressure conditions. Lucas Oil Stabilizer should be used 100% on open gears or when maximum adhesion and lubrication is required. It was 60% to 100% used in many automotive operations where the engines were so worn that a repair would otherwise have been unavoidable.It can be used 100% under such conditions where the pressure and friction are so strong that ordinary lubricants cannot handle it.Lucas Heavy Duty Oil Stabilizer fits snugly around the cylinders to prevent oil from rising and burning. Isolates and prevents combustion chamber contaminants from flowing down to prematurely spoil the oil. By avoiding these leaks and dry starts the life of an already worn engine can be significantly extended.The use of Lucas Heavy Duty Oil Stabilizer allows you to safely extend your oil change interval by at least 50%. This fact alone pays for the product, making all other benefits a bonus.Lucas Heavy Duty Stabilizer is a perfect lubricant for mechanical assembly and used by many major engine manufacturers. Fully adheres parts to eliminate dry starting which can be harmful to newly rebuilt engines.The negative effects of heat in an engine or gearbox are well known to anyone with a decent level of mechanical knowledge. Lucas stabilizer is designed to maintain its viscosity (resist dilution) at high temperatures. Ordinary oils often lose their viscosity and adhesion stability as temperatures rise beyond the point they were designed to work for. Adding Lucas stabilizer to the oil not only allows equipment to operate at hotter temperatures, it also safeguards motors and bearings from being damaged or ruined by overheating.DOSAGE:In the engine, use approximately 20% or one 1 L bottle per gallon ( 3784 L ) of any mineral, semi-synthetic or synthetic motor oil.In heavily worn engines, use up to 60 or 80% if necessary.In manual transmissions and transmission cases typically use 25 to 50%.In differentials use from 25 to 50%In worn or noisy differentials use 50 to 100%.In industrial gearboxes use 25 to 50% for preventive maintenance and lower energy consumption. If necessary, use 50 to 100% to stop leaks and overheating.The concentration of protective additives contained in the Lucas stabilizer is such that in an oil change the ratio for maximum lubrication varies between 20% and 60% in addition to other oils according to requirements.At this point the whole oil mix becomes much more fluid than oil alone its specific viscosity will adhere perfectly to all mechanical parts thus reducing friction it will allow any machine or engine to perform a certain job with less use power.This condition also creates a reduction in temperature which extends the life of oils as well as seals, bearings and other components.In the motorcycle field, in the case of wet clutches or in similar cases, the dosage to add to the oil is 10% maximum.At Ford Powerstrokes we suggest one liter of pure synthetic oil stabilizer per oil change,While with fully synthetic oils such as 5w20, 5w30 etc… we recommend the use of our synthetic oil stabilizerWith even lighter oils such as the 0w16, 0w20, 0w30 grades or in vehicles equipped with a viscosity sensor, we recommend using our LOW VISCOSITY oil stabilizer.Key Benefits:Increase the life of the oil itself at least 50% moreReduces the oil consumption and reduces lossesDelete the dry startsIncrease the oil pressureIncrease the horsepower and kilometers per litreLucas stabilizer can be used 80% to 100% to correct mechanical problems in gearboxes that are badly worn, leaky, overheated or run under extreme pressure conditions. Lucas Oil Stabilizer should be used 100% on open gears or when maximum adhesion and lubrication is required. It was 60% to 100% used in many automotive operations where the engines were so worn that a repair would otherwise have been unavoidable. The negative effects of heat in an engine or gearbox are well known to anyone with a decent level of mechanical knowledge. Lucas stabilizer is designed to maintain its viscosity (resist dilution) at high temperatures. Ordinary oils often lose their viscosity and adhesion stability as temperatures rise beyond the point they were designed to work for. Adding Lucas stabilizer to the oil

Price: 104.73 USD

Location: Carelli

End Time: 2024-11-02T00:16:25.000Z

Shipping Cost: 0 USD