Description: Marttiini MN620010 Scandinavian Knife Imported from Finland Marttiini has manufactured knives in Rovaniemi, Finland since 1928. Marttiini tends to try to strike a balance between beauty, functionality, and ease of sharpening. The blades are not as tough as those from other scandinavian knife makers, usually 53-54 Rockwell, which is still quite tough and they hold an edge very well. The handles are curly birch, either natural, stained, or lacquered. The marttiini knives are also much more affordable than other scandinavian knives.Scandinavian knife blades have what is known as a scandinavian grind, which means that the knive only has one bevel, running from roughly the center of the knife to the edge. This is the defining characteristic of scandinavian knives, as most other types of knive blades have two bevels: one that slopes more gently towards the edge, and then another bevel that slopes more sharply to form the actual edge of the blade. Scandinavian blades are very easy to sharpen, and very difficult to sharpen incorrectly. You don't need any kind of pre-formed sharpening jig or device or tool kit, just a flat stone. Lay the knife blade on top of the stone, or lay the stone on the knife, tilted to follow the angle of the bevel, and start running it back and forth until it gets sharper. The knife controls the angle for you. This also makes it much easier to sharpen a blade in the field. Scandinavian knives are also superior for wood carving, as again the single-bevel design controls the angle for you.This is a solid, functional fillet knife with a nice, long, flexible stainless steel blade featuring the Marttiini signature etched into it. The handle is made from curly birch wood, sanded, polished to a smooth finish, and then varnished, and has both a prominent inset for your index finger, and a flared pommel so the knife will never slip out of your hand. This knife has a full-length tang, and shown by the retaining nut in the pommel, giving this knife extra strength and durability. The knife is surprisingly lightweight, which reduces hand and wrist fatigue if you're using it for a long time.Comes with a nicely constructed and detailed leather sheath with stamped and stained artwork and the Marttiini logo. The sheath contains a plastic liner to prevent the very sharp blade from slicing through, and the belt loop is attached by a metal D-ring so that it swings freely and keeps out of the way when you're crouching or sitting.Below are the detailed measurements of this knife. One important note: for best comfort and grip, the length of your middle finger should be similar to the circumference of the handle.Blade Material: stainless steel, hardened to Rockwell 54Knife Length: 10.75 inches (27.3 cm)Blade Length: 6 inches (15.2 cm)Blade Width: 0.74 inches (1.9 cm)Blade Thickness: 0.05 inches (1.3 mm)Knife Weight: 2 ounces (57 grams)Handle Length: 4.75 inches (12.1 cm)Pommel: brass nutHandle Circumference: 3.5 inches (8.9 cm)Handle Material: varnished woodSheathed Weight: 3.7 ounces (105 grams)Sheathed Length: 12 inches (30.5 cm)Belt Loop Width: 2 inches (5.1 cm) Marttiini has manufactured knives in Rovaniemi, Finland since 1928. Marttiini tends to try to strike a balance between beauty, functionality, and ease of sharpening. The blades are not as tough as those from other scandinavian knife makers, usually 53-54 Rockwell, which is still quite tough and they hold an edge very well. The handles are curly birch, either natural, stained, or lacquered. The marttiini knives are also much more affordable than other scandinavian knives. Scandinavian knife blades have what is known as a scandinavian grind, which means that the knive only has one bevel, running from roughly the center of the knife to the edge. This is the defining characteristic of scandinavian knives, as most other types of knive blades have two bevels: one that slopes more gently towards the edge, and then another bevel that slopes more sharply to form the actual edge of the blade. Scandinavian blades are very easy to sharpen, and very difficult to sharpen incorrectly. You don't need any kind of pre-formed sharpening jig or device or tool kit, just a flat stone. Lay the knife blade on top of the stone, or lay the stone on the knife, tilted to follow the angle of the bevel, and start running it back and forth until it gets sharper. The knife controls the angle for you. This also makes it much easier to sharpen a blade in the field. Scandinavian knives are also superior for wood carving, as again the single-bevel design controls the angle for you. This is a solid, functional fillet knife with a nice, long, flexible stainless steel blade featuring the Marttiini signature etched into it. The handle is made from curly birch wood, sanded, polished to a smooth finish, and then varnished, and has both a prominent inset for your index finger, and a flared pommel so the knife will never slip out of your hand. This knife has a full-length tang, and shown by the retaining nut in the pommel, giving this knife extra strength and durability. The knife is surprisingly lightweight, which reduces hand and wrist fatigue if you're using it for a long time. Comes with a nicely constructed and detailed leather sheath with stamped and stained artwork and the Marttiini logo. The sheath contains a plastic liner to prevent the very sharp blade from slicing through, and the belt loop is attached by a metal D-ring so that it swings freely and keeps out of the way when you're crouching or sitting. Below are the detailed measurements of this knife. One important note: for best comfort and grip, the length of your middle finger should be similar to the circumference of the handle. Blade Material: stainless steel, hardened to Rockwell 54Knife Length: 10.75 inches (27.3 cm)Blade Length: 6 inches (15.2 cm)Blade Width: 0.74 inches (1.9 cm)Blade Thickness: 0.05 inches (1.3 mm)Knife Weight: 2 ounces (57 grams)Handle Length: 4.75 inches (12.1 cm)Pommel: brass nutHandle Circumference: 3.5 inches (8.9 cm)Handle Material: varnished woodSheathed Weight: 3.7 ounces (105 grams)Sheathed Length: 12 inches (30.5 cm)Belt Loop Width: 2 inches (5.1 cm) eBay integration by
Price: 40 USD
Location: 14139
End Time: 2024-08-27T12:48:26.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Brand: Marttiini
MPN: MN620010
Type: N/A