Description: Metal brake line replacement kit GM cars 1980-1993 FWD-replace rusted lines!!!!! for your FWD (front wheel drive) cartotal of 20 lines and couplers! for front wheel drive cars, see other listingsfor rear wheel drive. includes special lengths for your GM Car!(no need to buy a flaring tool!)Buy for the future brake job!!! This kit will do the entire car from the proportioning valve to the wheels.The lines to the master cylinder may need special nuts in a few cases that are not supplied in this kit. This is is a TrueBend metal brake line replacement kit. All lines are supplied double-flared at each end with the special bubble flare for your car. These malleable lines are easy to bend or coil without collapsing the tubing or restricting the flow of brake fluid. Four couplers are included to join lines where necessary. Instructions are also included.Will not fit any ABS Modules.The average Gm takes 21 feet of brake line to do system to the wheels, this kit has 40 feet of lines to fit all the various configurations.Use the extra lines for another project or up to the master cylinder! this kit is for the following: Buick Century 1982 to 1993 Regal 1988 to 1993 F. W. DRoadmaster 1991 to 1993 (see note #1 below)Skyhawk 1982 to 1989Somerset, Somerset Regal 1985 to 1993Skylark, Special Grand Sport, sportwagon 1980 to 1985 Cadillac Allante 1987 to 1993Cimarron 1982 to 1988Eldorado 1986 to 1992Seville 1986 to 1993 Chevrolet Beretta 1987 to 1993Caprice, Impala, Belair 1991 to 1993 see note # 1Cavalier 1982 to 1993Celebrity 1982 to 1990Citation 1980 to 1985Corsica 1987 to 1993Lumina 1990 to 1993 Oldsmobile 88,98 Delta, Regency 1985 to 1993 F. W. DAchieva, Cutlass Calais 1985 to 1993Cutlass Ciera, Cutlass Cruiser 1982 to 1993 F. W. D.Cutlass Salon, Vista 1988 to 1993 F. W. D.Firenza 1982 to 1988Omega 1980 to 1984Toronado 1986 to 1990 Pontiac Bonneville, Catalina, Grandville, Executive 1987 to 1993Grand Am 1985 to 1993Grand Prix 1988 to 1993LeMans GTO Grand Am 1988 to 1993Phoenix, Ventura 1980 to 1984Sunbird, J2000 1982 to 1993 Here is a list of what lines are included to do the models above, unions are to make the longer length lines, instructions are included. 1x 6" Line 1x 8" Line 1x 12" Line 1x 16" Line 1x 20" Line 1x 23" Line 1x 27" Line 1x 30" Line 1x 33" Line 1x 37" Line 2x 40" Line 1x 43" Line 1x 47" Line 1x 51" Line 1x 60" Line 4x Unions Our TrueBend® brake lines resist corrosion, vibration, fatigue and shock from impact. They are coated for corrosion protection in compliance with GM132M-ASV and SAE J527B. Each line is manufactured by double wrapping a copper coated steel strip to form a double wall tube. Then, the tube is furnace brazed to fuse the copper/steel tube into one continuous and seamless tube. The tube is then given a outer coat for corrosion and abrasion resistance. These lines are the strongest and safest avai; yet can still be easily bent without kinking or without damaging the outer coat. Note # 1 , These cars may need s 10x1 to 12x1 MM adapter in the rear This kit contains all the lines to do a wide variety of GM cars, and many different configurations, so you will have unused lines in any installation. These extra lines are a bonus that can be used for other projects The tubing is double walled, seamless and copper fused with a special inner and outer coating to provide protection from abrasion and corrosion. This is the same tubing that is used on new cars! The lines are supplied straight. If you need a very sharp bend next to the flare at the end of the line, you will need a bender listed under "tools/supplies" on our Ebay store. All unions are solid brass to stop rust. All lines are made in USA or Canada and are the stock 3/16" outer diameter with a factory flare. fits s the years: 1980 81 1981 82 1982 83 1983 84 1984 85 1985 86 1986 87 1987 88 1988 89 1989 90 1990 91 1991 92 1992 93 1993 Click on the Ebay store link for parts for your next project.These items were offered from our large inventory of parts for 1930-1980 vintage cars and trucks. Please be specific and include the item # EE22791 in any correspondence Powered by SixBit's eCommerce Solution
Price: 69.99 USD
Location: Duluth, Minnesota
End Time: 2024-10-31T18:09:57.000Z
Shipping Cost: N/A USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
Returns Accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Brand: Does not apply
Manufacturer Part Number: Does not apply