Description: Light word folding metal edging slotting machine, slotting machine, manual folding metal slitting machine word Lightweight perimeter letter slotting machine is suitable for advertising production, metal word production, acrylic word production, decorative craft field, simple and fast operation. Use method 1、According to the need of the plate used, adjust the height of the blade knife, determine the depth of the plate, tighten the chuck; 2、The shuttle bar is pushed into the shuttle slot; 3、Grip the plastic handle with your left hand, clamp the sheet and move it to the required slotting part; 4、Hold the motor with your right hand, and shuttle down to slot. Attention Single-speed, double-speed, infinitely adjustable, high-speed chuck electric mill, the use of the following points must be noted: 1, before starting the slotting electric mill, should check the chuck and spindle nut firmly, the power cord is not allowed to have broken, the power cord can not be subjected to the work of the touch pressure, should be unloaded before the start of the run for 1 minute, the use of power supply voltage fluctuations of not more than 10%. 2, slotting electric mill moving, not allowed to lift, pull the electric mill, must be held in hand to move the shell. 3, to keep the internal cleanliness of the electric mill, the wind mouth block should be smooth, usually remove dust and by dirt, pay attention to prevent iron filings and other debris into the wind block, iron filings and debris into the wind mouth block, will break the motor wind blade, bite the motor. 4, pay attention to the maintenance of the motor, the commutator should be clean, when the commutation spark increases, the commutator surface on the black marks more, should be timely grinding commutator. When the brush is too short, it should be replaced in time, so that the brush and the commutator have a certain contact pressure. Poor contact between the brush and the commutator will burn the motor. 5, slotting electric mill should be dried out after moisture treatment, available 500v megohm meter insulation resistance, insulation resistance over 7 megohm to continue to use. 6, blacksmith pliers (highly rigid steel) do not throw away, need to be properly stored to avoid damage!
Price: 112.4 USD
Location: shenzhen
End Time: 2024-11-17T19:18:05.000Z
Shipping Cost: 76.8 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Brand: Unbranded
Origin: Mainland China
weight: 4kg
MPN: Does not apply
