ModeloDrive Carbon Fiber OER Racing Doors MRS Spyder for MR2 Toyota 00-05 model

Description: About Store Contact Shipping Feedback ModeloDrive Carbon Fiber OER Racing Doors MRS Spyder for MR2 Toyota 00-05 modelodrive_120309 OFF-ROAD CAGED RACING CAR TRACK USE ONLY. NOT FOR STREET USE! Description / Notes: Part #: modelodrive_120309 Make: Toyota Model: MR2 Material: Carbon Fiber Condition: New Product Notes : ModeloDrive Carbon Fiber OER Racing Doors MRS Spyder for MR2 Toyota 00-05 modelodrive_120309 Description : This is a OER Racing Doors manufactured or distributed by ModeloDrive with Carbon Fiber being the primary exterior surface material. Most carbon fiber parts we sell are "wet" carbon fiber, this means they have that "wet" glossy look, the only exception to this is then the product specifically states "dry". Dry carbon is usually lighter than wet carbon but has a dull flat finish. When installing ModeloDrive Carbon Fiber parts make sure you are using hood pins on hoods and do not use hydraulic arms to prop open hoods and trunks as they can warp the light weight components over time. ModeloDrive Carbon fiber parts may require modifications such as: Drilling of holes / cutting / sanding / fixing cracks / buffing to eliminate scratches, etc. Ships direct from the manufacturer or a distributor. Manufactured with a marine gelcoat variant to help prolong the life against UV aging effects. Our Carbon Fiber parts are made with handlaid wetcarbon with plastic resin. Genuine show quality carbon reinforced with FRP fiberglass backing. Aeroparts are to be installed by a professional body shop. Bolts, screws, and double sided tape is not included. Carbon Fiber parts often have a fiberglass underside which may require modification, shaving, sanding, drilling, filling in order to ensure proper fitment. New: A brand-new, unused, unopened, item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in our retail store. To be installed professionally by a bodyshop with a valid automotive repair business license. Carbon fiber parts are reinforced with a fiberglass backing for added strength. Carbon fiber parts still require prep work. You will need to preform taks such as: buffing, drilling holes (for winshield windshield water nozzles, etc), adding or removing fiberglass (mounting tabs, etc). Ships direct from the manufacturer or a distributor. Manufactured with a marine gelcoat variant to help prolong the life against UV aging effects. Carbon is a composite material and may exhibit more gap than OEM materials. Hoods require hood pins. We do not offer any guarantee of fitment on vehicles that have been in involved in accidents and/or have body damage or customization. Disclaimer ModeloDrive door caps typically overlap the existing door to extend the styling of a matching body kit. They are usually installed using bolts, 3M automotive trim tape, or specialized epoxy bonding adhesive. Modifications may be required to the vehicle’s original doors, and trimming or reshaping of the fiberglass may be necessary to achieve a secure fit. Door caps are purely cosmetic and do not enhance structural integrity or safety. It's essential to ensure compatibility with the vehicle’s design and the body kit before installation. Replacement Doors ModeloDrive replacement doors, made of fiberglass, are intended for track use only and offer no protective features for street driving. These lightweight doors are specifically designed for racing or off-road use on fully caged vehicles equipped with door bars for added safety. They do not provide the structural strength required for street use and are not street-legal. Installation of ModeloDrive replacement doors may require cutting, trimming, and reshaping the fiberglass, along with sourcing separate mounting hardware such as bolts and fasteners. Modifications to the vehicle’s door frame are often necessary for proper fitment. For the best results, ModeloDrive strongly recommends professional installation by a custom shop experienced in handling fiberglass components. Traditional auto repair shops may not possess the expertise needed to properly trim, cut, or modify fiberglass for these applications. As with all ModeloDrive body kits and accessories, these doors and door caps are strictly for off-road, show, or track use only. Due to Department of Transportation (DOT) regulations, most ModeloDrive doors and door caps are not street-legal. ModeloDrive does not endorse or recommend using these products on public roads or highways. Vehicles depicted are highly modified for show which may include molding or adding to the original piece. Parts such as lights, splitters, canards, paint, wings, and others accessories are not included unless specified in the product description. Pictures are meant to show the style of the item(s) in the listing and in some cases may not necessarily show the exact year/make/model of the vehicle listed in the title and description. Will it fit my vehicle? Pay close attention to the make, model and year, but also the trim level. The eBay parts finder may be inaccurate, go by our listing title and description. Verify with us if you are unsure US Customers PayPal is accepted Visa Master Discover also accepted International Customers Please contact us before purchasing Payment types vary Our goal is to earn 5 star rating with every purchase! Tell us how we can make your exerience a 5-star one! All Copyright © Tilbury Enterprises LLC

Price: 2040 USD

Location: Las Vegas, Nevada

End Time: 2025-01-12T07:42:38.000Z

Shipping Cost: 0 USD