Morel Elate Carbon Pro 52A 5-1/4" Component System

Description: Product highlights2-way component speaker system includes two woofers and two tweeters 5-1/4" 3-layer carbon fiber/Rohacell woofer cone with butyl rubber surround 1.1" Elate Carbon Alto Acuflex-coated silk dome tweeter cast aluminum basket handles up to 160 watts RMS (1000 watts peak power) frequency response: 40-25,000 Hz sensitivity: 85 dB at 2.83 V woofer mounting depth: 2-3/8" woofer cutout diameter: 4-13/16" grilles included warranty: 1 year What's in the box2 MW5 Woofers 2 Alto Tweeters (with attached 7" length of speaker wire) 2 Woofer grilles 2 Tweeter grilles (installed) Eight 1-1/4" Screws Six 3/4" Screws 8 Large speed clips 6 Small speed clips Four 0.25" Crimp-on female quick slides Four 0.110" Crimp-on female quick slides Installation guide Warranty card Genuine product verification instructions About this itemWritten by Crutchfield's Alexander H. Add a special tweeter Just the style of Morel's iconic Lotus-design speaker grilles takes your breath away, and then there's the sound... The Elate Carbon Pro 52A 2-way component system includes a 5-1/4" woofer and the Elate Alto 1.1" tweeter, not included with the "non-Pro" Elate Carbon systems. The woofer uses a carbon-fiber/Rohacell cone that minimizes distortion for the most accurate sound possible. And for the Elate Alto tweeter, Morel draws on cavity-back technology developed for their flagship Supremo Piccolo tweeter for astounding highs. Elate Carbon tweeter Morel enhances the performance of the silk dome tweeter with a coating of Acuflex™ compound, which helps damping for a natural sound. By cancelling break-up that can happen at high-frequencies, this special tweeter soars with a frequency response that reaches up to 25,000 Hz. Additionally, Morel allows for a very low crossover point, which means this tweeter can achieve powerfully realistic performance and a highly accurate soundstage with even the most complex music. Build an active system Passive crossover systems are not included. Morel designed these Elate Carbon speakers to be neutral, without coloration, so that you can use your active crossover to craft exactly the right sound for you and your vehicle. You'll need an active crossover to use these speakers. If you would like to use passive crossovers with this system, optional Morel MXT280C crossovers are available Why choose Morel? It's hard to not feel overwhelmed by your choices when deciding which component system is worthy of your car... and your ears. But if you're looking for the best, Morel's component speakers soar. Every bit of that excellence is due to their passion for sound and their insistence that every hand-made Morel driver be tested to meet their premium standards. Installation note: You'll need a pair of our universal backstraps to install the tweeters in most factory locations.

Price: 1766.12 USD

Location: Charlottesville, Virginia

End Time: 2024-11-26T21:45:29.000Z

Shipping Cost: 0 USD