Revere

Motenergy ME-1206 Brushless 20HP DC Motor

Description: These motors were custom ordered and tested for a few months, then the buyer opted for a different motor. All the motors we ship have been tested and checked for damage.Similar to the ME1117 on the motenergy.com web site..Mounting and wiring are the same although it uses a Molex Micro-FIt 3.0 8 pin connector. And the shaft is 24mm diameter, not 15mmwith a M10x1.5 threaded hole in the end. *BRUSHLESS SINUSODIAL DC MOTORS - BLDC*MUST USE A BRUSHLESS CONTROLLER LIKE: KELLY CONTROLLER 8080N-NPS*MOTOR WEIGHS (out of box) 22lbs 20oz **SPEC SHEET INFORMATION DIRECT FROM THE MANUFACTURER, IT DOES NOT INCLUDE VOLT AND AMP RATINGS. THE MANUFACTURER GAVE ME THE FOLLOWING INFORMATION: Nominal 50V 100A 5000W 6.7HP - this was the requirements of the project these had been ordered for. These requirements were met by using an existing design:Max continuous 72V 100A 7200W 9.6HPMax intermittent 72V 220A 15840W 21.1HPThe motor is capable of running on 96V to get to the 5000 RPM max, BUT, This isn't recommended.***ADDITIONAL INFORMATION*** 1) The motor has 8 magnets, 4 pole pairs. 2) The rotor position feedback is a Sine-Cosines sensor made by Renishaw. RMB20AC01SS1.3) The motor is designed to run at 2500 rpm with a 48 VDC battery pack. A 72 VDC battery pack is 3750 RPM loaded, 12.6 kw peak, 16.8 Hp.4) Maximum continuous current can be 100 amps with proper air cooling, Rated for 250 amps for 2 minutes.5) Temperature Sensor is a KTY84-130.6) Maximum rotor speed is 5000 rpm. If you exceed this speed, then there can be severe damage or personal injury.7) Winding is 24 turns per Phase, 3-Phase, Y-connected. **FOR MORE DETAILED SPECS, PLEASE REFER TO THIS PAGE:http://www.motenergy.com/me1117.html BRAND: MOTENERGY, USED TO BE MARS BEFORE THAT ETEKTHIS HAS BEEN TESTED.

Price: 300 USD

Location: Milwaukee, Wisconsin

End Time: 2024-02-23T21:38:24.000Z

Shipping Cost: 3 USD

Product Images

Motenergy ME-1206 Brushless 20HP DC MotorMotenergy ME-1206 Brushless 20HP DC MotorMotenergy ME-1206 Brushless 20HP DC MotorMotenergy ME-1206 Brushless 20HP DC MotorMotenergy ME-1206 Brushless 20HP DC MotorMotenergy ME-1206 Brushless 20HP DC Motor

Item Specifics

Restocking Fee: No

Return shipping will be paid by: Buyer

All returns accepted: Returns Accepted

Item must be returned within: 30 Days

Refund will be given as: Money Back

Type: Brushless Permanent Magnet Motor

Compatible Model: Motenergy ME-1206

Country of Manufacture: China

EV Drives Product Code: MOT-ME1206

MPN: ME1206

Model: ME 1206

Brand: Motenergy

Recommended

Motor-Controller Combo - Alltrax SR48300 & Motenergy ME0909 24, 36 or 48 VDC Kit
Motor-Controller Combo - Alltrax SR48300 & Motenergy ME0909 24, 36 or 48 VDC Kit

$1104.00

View Details
Motenergy ME1616 Brushless 20 kW - 55 kW Liquid-Cooled IPM Motor 48-120V
Motenergy ME1616 Brushless 20 kW - 55 kW Liquid-Cooled IPM Motor 48-120V

$1000.00

View Details
DC Motor Brush-Type 56 Frame ZYT48-06 with 48 VDC 1.5 HP 1800 RPM TE UL Listed
DC Motor Brush-Type 56 Frame ZYT48-06 with 48 VDC 1.5 HP 1800 RPM TE UL Listed

$266.00

View Details
DC Motor Brush-Type 56 Frame ZYT48-06 with 48VDC 1.5HP 1800RPM TENV UL 109264
DC Motor Brush-Type 56 Frame ZYT48-06 with 48VDC 1.5HP 1800RPM TENV UL 109264

$271.00

View Details
DC Motor Brush-Type 56 Frame ZYT42-02 with 180VDC 1/4HP 1750RPM TEFC UL 098003
DC Motor Brush-Type 56 Frame ZYT42-02 with 180VDC 1/4HP 1750RPM TEFC UL 098003

$184.00

View Details
 Motenergy ME0708 Brush-Type Permanent Magnet DC Motor
Motenergy ME0708 Brush-Type Permanent Magnet DC Motor

$695.00

View Details
Adapter Hub, Aluminum, for Pelton Wheel ME0903, Motenergy for Micro Hydro Water
Adapter Hub, Aluminum, for Pelton Wheel ME0903, Motenergy for Micro Hydro Water

$19.00

View Details
Hydro Generator, Pelton Wheel 1k-3k Watts, 24-48 VDC ME1603, ME0903, ME2104
Hydro Generator, Pelton Wheel 1k-3k Watts, 24-48 VDC ME1603, ME0903, ME2104

$389.00

View Details
Motenergy Manta Adjustable Bracket /  Base Plate for motors
Motenergy Manta Adjustable Bracket / Base Plate for motors

$99.98

View Details
Replacement Brush Holder with Brushes for ME0708 & ME0709
Replacement Brush Holder with Brushes for ME0708 & ME0709

$105.00

View Details