MSD 99003 Black Ignition Kit Ready to Run Distributor/Wires/Coil/Bracket

Description: MSD 99003 Black Ignition Kit Ready to Run Distributor/Wires/Coil/Bracket - SBC Item Description SK Speed Part Number: EZKMSD99003 Included is an MSD Ready To Run Pro-Billet Distributor (83603), 8.5mm Super Conductor Wire Set (35653), Blaster 2 Ignition Coil (8222), and an MSD Coil bracket (8213) Now in All Black! We've put together a complete kit to take the guess work out of choosing the right components for your performance small block Chevy! 265-400 c.i. This kit requires no external ignition box and is ready to run out of the box! *NOTE! The distributor that is included has an IRON Gear, made for use with non-roller cams. Pro-Billet Distributor The Pro-Billet Ready-to-Run distributor is the perfect upgrade for outdated points distributors or bulky HEIs. Simply install the distributor in the engine, connect three wires, the coil and fire it up! A maintenance-free magnetic pick-up accurately triggers the module. The increased output of the amplifier easily outperforms stock ignitions and will smooth out the engine's idle, improve starting and provide a much higher rpm range. There is also a vacuum advance canister to help improve economy. For positive street performance, the Ready-to-Run is the best choice. Super Conductor Wires The MSD 8.5mm Super Conductor Wire is "the" performance wire. Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference! In a single 12" length of Super Conductor Wire there is only 40 - 50 ohms of resistance! That is the lowest resistance of any helically wound wire. The low resistance results in less loss in spark energy so more reaches the spark plug. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference (EMI) "choke". This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. These wires have a 90 degree boots on the spark plug end. Blaster 2 Coil If you are looking to upgrade your stock coil, or want to compliment the performance of your MSD Blaster Ignition, MSD 5, 6 or 7, the Blaster Coil line is the right choice. All of the Blaster Coils are designed for improved spark output! Special 100:1 windings are used to provide maximum build-up of voltage! These windings are held secure and kept cool in an oil filled metal canister. The tower assembly is molded of durable alkyd material due to its high dielectric characteristics while wide spaced brass primary terminals prevent the possibility of spark. There are several versions of the Blaster Coil available. All of them have the same internal specifications, but have different housings or components. Each Blaster Coil can be used with a stock ignition, Blaster Ignition, MSD 5, 6 or 7 Ignition Control. Most late model vehicles with electronic ignitions do not require a ballast resistor, check your ignition and manufacturers specifications to determine if a ballast is required in your application (not included). Coil Bracket The MSD Coil Bracket offers easy, universal mounting for standard size ignition coils up to 2.25” in diameter. The Bracket uses a bolt and nut combination instead of the easily stripped self-tapping screw common on other brand brackets.

Price: 734.95 USD

Location: Lindenhurst, New York

End Time: 2023-12-05T22:40:46.000Z

Shipping Cost: 0 USD