Multipurpose Tester for LED TV Backlight Constant Current Driver Board KT4H USA

Description: Multipurpose Tester for LED TV Backlight Constant Current Driver Board KT4H NEW Description Product Parameters： • Product model: KT4H • Vin: AC 85-265V • Vout: DC 0-330V (Automatic + Adjustable) • Voltmeter Accuracy: < (± 0.5 ± 1%Vout) V • Iout: 0-150mA (Automatic + Adjustable) • Constant Current Board Testing Current: 0-999mA • Ammeter Accuracy: <(±2 ±1%Iout) mA • Pinput: 50VA (MAX) • Temperature: -20℃~+40℃ Product Introduction： Real-time testing voltage and current of constant current drive board. 1. Testing LED strips, LED panels, single LED bead, COB lighting sources and so on. 2. Testing backlight of LED TV, displays, computers and so on. 3. Compatible with all the LED strips (high voltage or low voltage). 4. Manual adjusting the range of testing voltage (20-330V/DC) and current (20-150mA). Adjusting voltage at open circuit (without loads) and adjusting current with loads or contact probes together. 5. No burn out when testing single LED bead with wrong polarity. (Set voltage around to 20V and the current switch to 1mA) 6. Testing voltage parameter of various of electronic components. 7. Testing LED light on vehicle. Testing Methods： Default factory setting: Output Voltage 330V, Output Current 30mA. You can testing the backlight of TV with any size at this default settings. 1. Self-testing: Plug in, turn the power switch on. The voltage is around 330V, current is 0; Contact the probes together, voltage changes to 0 and current changes to around 50mA, then testing can be started. 2. In testing: Voltage = ‘0’, SHORT CIRCUIT. Voltage = ‘330V’, OPEN CIRCUIT. 3. Testing single LED bead (Set voltage around to 20V and the current switch to 1mA): A. With right polarity: the voltage shows on the tester of a normal LED bead is about 80% of the rated voltage, for example, the operating voltage of the LED bead is 2.4V if its rated voltage is 3V; B. With wrong polarity: Voltage display the open circuit voltage. 4. Testing LED strips: Set the voltage to around 200V, change the current if need adjust brightness. Test Method without Disassembling the Screen Cut off the power of TV, Unplug the interface sockets of the constant current plate and light bar, Insert the Red and Black pens of the tester into the anode and cathode of the interface of the LED light bar. 1. Multiple LED strips Testing the voltage of each strips and record them. Compare the voltage of each strips, it is normal if the differences <2V or <3%. 2. Single LED strip A. The LED strip is not on (need remove the screen to repair): voltage = 0, SHORT CIRCUIT. Voltage ≥ 300V, OPEN CIRCUIT. B. The LED strip is on (need the testing references of constant current driver board to determine the backlight is normal or not). Test Method of Constant Current Driver Board Testing situation: the LED strip of backlight is on with the tester, but it does not work with the constant current board; A. Cut off the power of TV, unplug the interface sockets of the constant current plate and light bar; B. Connect the constant current board with the tester using the cables in the kits on right polarity. C. Insert the Red and Black pens of the tester into the anode and cathode of the interface of the LED light bar D. Turn the power of TV on. E. Testing voltage >30V, Current >30mA and keep stable, and the LED strip working normal, then the Constant current board is normal Feature: Universal tester Stepless regulation of voltage and current Led dual meter digital display Package Content: 1*LED tester 1* Power plug 1*Cloth bag 1*Instructions 1*Test Probe Note: Please allow a slight size difference due to manual measurement. Due to the different display and different light, the picture may not show the actual color of the item. Payment We only accept PayPal and Credit Cards. PayPal is the only online payment method we accept. Please make sure you have a valid/confirmed PayPal account prior bidding. And please make sure that your PayPal registered address is the same with your eBay registered address. Shipping Your parcel will be sent within 5 working days. If you do not receive your item within 30 working days since payment finished, please contact us immediately for further assistance. Note: It may takes more than 30 working days to other countries such as Mexico, Brazil, Chile, Peru, because they are far away from China. PS: We also offer faster shipping service (3-5 days to deliver), such as DHL, EMS, but buyers need to pay for the extra shipping cost. Please contact us if you need it. Customs Declaration: Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding. Return Policy If you are dissatisfied with our item or service, then please contact us via eBay message before leaving any feedback. We are committed to resolve all issues in a friendly and satisfactory manner. We always reply to eBay messages within 1-2 business days. If you do not get a response from us, then please check your eBay message. Only unused, undamaged and original condition item can be qualified for a return. Returned products that are not in original packaging or with something missing are subject to minimum 30% to 50% of the total price. The seller is not responsible for returned parcels due to incomplete address or address impossible to deliver to. Feedback: We strive for 100% customer satisfaction! If you have any questions, please feel free to contact us instead of leaving negative feedback. We will reply your e-mail within 24 working hours.

Price: 60.58 USD

Location: China

End Time: 2024-12-03T01:41:20.000Z

Shipping Cost: 0 USD