Description: Julldent Gingival Former Customization Silicon IndexCustomization Silicon IndexFeaturesThe cervical former can be used with ALL IMPLANT SYSTEMS (Universal).It can be used to shape healing collars, Ti- bases, temporary and final abutments, as well as impression copings.N.B: threaded healing collars can be used only with centered shapes(denoted with the letter C) For other shapes a two-piece healing collar or any other 2-piece accessory should be used.Description Julldent Gingival Former Customization Silicon IndexMost of the gingival former and cervical parts of the implant abutments are rounded. While following the anatomy it is not rounded all the time. Is compatible with any implant system and any abutment. It is in 37 different gingival shapes that match most clinical situations there is no need to add a separate medium that can be used to preserve the keratinized soft tissue after implantation helps in recording accurate impressions of implant and soft tissue around the implant. The EPSI is a set of 3 silicone moulds that aim to modify the cervical contour of implant prosthetics and accessory components into anatomical shape. This allows the peri-implant soft tissue to attain a better architecture and allows for a more natural emergence profile for implant prosthesis.In anterior – it is triangular,In posterior – it is semi trapezoidIn premolars – it is ovoid in shape.Key Specifications Material: Fabricated from a biocompatible silicone materialAutoclave: It is autoclavable. Packaging Set of 3:1 x Anterior Mold1 x Posterior Mold1 x Premolars MoldDirection to UseSelect the mould (anterior, premolar or molar) you want to use. Select the most suitable size based on the meso-distal width. Usually, the best size is 2-3 mm smaller than the meso-distal size of the tooth to be restored. This can be measured with a periodontal probe or a calibre.Place the accessory to be modified inside the patient's mouth to identify the facial side. Mark the centre of the facial site with a burr or an indelible marker. The trial will allow the identification of the implant inclination and if the implant is centralised or not.Attach your accessory to an implant analogue and place it in the selected site in the former with the mark made intraorally facing the buccal or labial of the mould.Adjust the vertical level by moving the analogue up or down. Eg. If the soft tissue is very thick or the implant is sub crestal, the analogue is moved further down and vice versa. Note: It is important to have at least 0.5-1 mm of the accessory above the bone level before the customised composite part to avoid undue crestal bone loss. Customisation in the immediate extraction socket is an exception to this precaution.If you want to secure the composite to the used accessory, you can make the side walls rough with a burr. On the contrary, if you want to make a temporary crown on an abutment, you can paint it with Vaseline.When everything is aligned and secured inject flowable composite or a similar material into the mould. When using light-cured resins it is advisable to enjoy and cure it in 2 steps if you are using a conventional light cure. If you have a light cure that has 4 mm or more curing depth, you can do it in a single step. If you are using a dual-cure resin you can inject it in a single step.After curing, it is advisable to trim excess resin flashes. Usually only polishing using composite polishing tips is required. Do not over the finish to avoid altering the concavo-convex profile. Inspect for voids. If any, fill it with flowable resin and finish.DISCLAIMERThe sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so, do not bid on this item unless you are an authorised purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item.
Price: 103.4 USD
Location: DELHI, DELHI
End Time: 2025-01-09T13:51:49.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Brand: Unbranded
MPN: Does Not Apply
