Description: Nixtrainz NTZ5, Decoder Buddy 21 pin conversion board The Decoder Buddy V5 and V5B were developed for the 12 output decoders and include a couple added features.This mother board does not include the 21-Pin Decoder.This mother board requires soldering.This printed circuit board is NOT INTENDED FOR USE IN A DC SYSTEM. However, if the decoder you are using supports DC operation it should work.The V5 and V5B come with standard 2.2K resistors onboard.The mother board includesOne 21 Pin Decoder receptacleTwo pairs of track input padsOne pair of motor input padsOne set of stay alive pads (U+, GND on the V5. The V5B has the “W” pad for a Power Pack)Two pairs of speaker pads in parallel by side12 lighting outputs on a separable “small connector board”Lighting outputs A11 and A12 are replicated on the “motherboard”Resistors for use with LED lighting. The “0” ohm resistors accommodate previously installed LEDs with resistors in line and “12-volt LEDs”. It is IMPORTANT to realize that resistors must be used when LEDs are connected to the lighting outputs of the custom “0” Ohm boards!!!
Price: 15.5 USD
Location: Audubon, Iowa
End Time: 2023-11-29T17:07:33.000Z
Shipping Cost: 5.5 USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Color: N/A
MPN: NTZ5
Material: Circuit board
Year Manufactured: 2019
Modified Item: No
Vintage: No
Power Supply: DCC
Brand: Nixtrainz
Control: Digital
Type: 21 pin mother board
Voltage: DCC
Features: conversion board for 21 pin decoder
Recommended Age Range: 14 and older
Country/Region of Manufacture: United States
