OBD2 Gauge Car HUD Head Up Display Gauge Display Tachometer Gauge Multi-function

Description: New and high QualityMultifunctionOBD GPS Slope meter accelerometer and backlights LCD HD displaySuitable for Universal cars OBD2 Compatible Vehicles: OBD2 is only available for vehicles manufactured after 2008. GPS models fit all vehicles. (If your car is not OBD compatible, please use the GPS model. If you are not sure if your car is compatible, please contact us before purchasing) Dual system, no change. OBDll mode is not compatible with hybrids, diesel, pickup trucks, RVs, computer modifications.LCD DELAY-FREE OBD Gauge Display: The in-car instrument screen has a mirrored HD display. The tachometer and speedometer analog display has a pointer that indicates the value, so you can visually identify the engine RPM value and speed. The digital speed readout is easy to see at a glance, allowing you to focus on driving without having to look down, avoiding distractions or even accidents from the dashboard.New Driving Experience - 12 kinds of display interface, free switching, LCD meter, clear fault code, data stream reading. When the engine warning light on your car's dashboard comes on, it indicates some kind of fault in your car, but with this car flat screen display, you can clear the fault codes yourself without going to a repair store and paying for the repair.Installed Firmly, Plug and Play-The installation method adopts adjustable bracket, put it on the dashboard or stick it on the windshield, easy to operate and install without damage. Common meter only has OBD mode, while our meter is dual mode: OBD+GPS two in one, default display OBD+GPS function at the same time, data display is more abundant. obd system, can read more than 100 kinds of data in the car. If your car doesn't have OBD2 protocol, it can display GPS function. OBD+ GPS Dual systemGPS is compatible with all models. Vehicle speed,voltage,water temperature,RPM,Fuel consumption,Average fuel consumption system time,Driving time,Driving distance,total mileage,satellite status,altitude,driving direction,latitude and longitude,kilometers per liter,intake pressure,oil temperature,air-fuel ratio turbo pressure,intake air temperature,oil pressure,throttle valve,engine load,gearbox oil temperature,accelerometer G value table,accelerometer test,Brake test,Roll angle,pitch angle FAQ for OBD System: 1. There is no display on the screen and there is no power supply Please check whether the OBD cable is damaged or replace the vehicle for testing 2. The product is powered on, and the screen only displays voltage Please switch to the GPS system (within 5 seconds of the product being powered on, right dial the dial button to select the GPS system) [HUD products are only applicable to OBD2 and EOBD (OBD2 and EOBD are only used for vehicles manufactured after 2008)] 3. Incorrect vehicle speed ①Please check whether the speed unit is correct km/h or MPH (please refer to the speed unit settings in the setup menu) ②If the speed unit is correct, fine tune the speed (please refer to Speed Error Adjustment in the setting menu) 4. Unable to shut down Enter the system setting, switch to the shutdown voltage setting, and adjust the parameter value to 13.2V / 13.6V (the product will automatically shut down after three minutes of vehicle shutdown) 5. Automatic shutdown of the product during driving of the automatic start and stop or hybrid vehicle ①Enter the system settings, switch to the shutdown voltage setting, and then adjust the mode to COM ②Enter the system settings, switch to the shutdown delay setting, and adjust the parameter value to 300 seconds (the product will automatically shut down after five minutes of vehicle shutdown) ③Please switch to the GPS system (within 5 seconds of the product being powered on, right dial the dial button to select the GPS system) 6. Operation error leading to product crash ①Enter the system setting, switch to factory reset, briefly press the dial button vertically to save and exit ②Please switch to the GPS system (within 5 seconds of the product being powered on, right dial the dial button to select the GPS system) 7. Restart repeatedly after turning off the ignition, and HUD do not turn off. Please enter the system settings, adjust the voltage error, set the parameter value as 95%, save your settings and exit. FAQ for GPS System: 1. There is no display on the screen and there is no power supply Please check whether the OBD cable is damaged or replace the vehicle for testing 2. No vehicle speed display After the product is powered on, the satellite icon flashes to indicate that it is in a search state. Please move the vehicle to an open road to receive the signal. After the satellite icon stops flashing and displays the number of satellites, the product can be used normally 3. The speed is still displayed after the car stops When driving to places such as underground parking lots, tunnels, and overpasses that cause unstable signals, there may be some deviation in the data displayed by the product. Driving the vehicle to an open road surface can restore normal operation 4. The product cannot be automatically turned on or turned off during driving Enter the system setting, switch to the shutdown voltage setting, and adjust the parameter value to 12.8V / 13.0V 5. Unable to shut down Enter the system setting, switch to the shutdown voltage setting, and adjust the parameter value to 13.5V (the product will automatically shut down after three minutes of vehicle shutdown) 6. Inaccurate satellite time Enter system setting, switch to system time adjustment, and adjust the parameter value to local time zone, with an adjustment range of 30 minutes/time 7. Driving direction display error When there is no vehicle speed, the satellite cannot identify the driving direction of the vehicle. Only when the vehicle speed exceeds 5Km/H can the product display the driving direction normally

Price: 49.99 USD

Location: Guangzhou

End Time: 2024-10-11T12:46:34.000Z

Shipping Cost: 0 USD