Description: OctoPrint / OctoPi Server. Fully configured, plug and play ready. Our OctoPrint server is industrial ready, highly secure and reliable for 24/7 management of your 3D printer. All required software is preinstalled. Just attach to your printer and go! And it is lower in cost than Raspberry Pi! Also look at our OctoFarm server listing (https://www.ebay.com/itm/154318130147) if you are running a fleet of Octoprint. Whether you have 1 or 100 printers to manage, we believe this is a superior solution for running OctoPrint. Key features:Latest OctoPrint software preinstalled, ready for you to login and begin a fresh configuration.OctoPrint with SSL proxy preinstalled (access OctoPrint via HTTP or HTTPS)Industrial hardware and specially tuned OS, ready for non-stop 24/7 operation over yearsOperates from high speed and reliable eMMC flash storage (not unreliable TF cards used in RaspberryPi)Custom Linux kernel with optimizations like memory file system, disk compression, and buffered writes to increase system performance and long term durability of hardware Internal 2.4Ghz Wifi for reliable network connectivityOne external slot supports microSD cards for optional extra storage (up to 64GB) Two external USB 2.0 ports to attach one printer and one peripheral Latest Ubuntu 20 Linux operating system hardened for security with root access enabled Very low power. Uses less than 5 watts max. One micro USB power supply is included. Very low heat. No internal fan to wear out. Completely silent. No overheating problems.Very light weight. Weighs 1.85oz (52 grams). Easy to mount with double sided tape or other methods.Ready to support external IP webcams. (Contact us if you want support for a directly attached webcam). Easy, no guess, no Linux expertise required setup process: Attach a standard USB keyboard and HDMI monitorConfigure network settings using a menu driven interface. No struggling on the command line! Once connected to network can also use SSH to manage device remotelyFleet deployment can leverage pre-configured wifi settings DHCP (default) or static IP supported Optional add-ons:External high gain 5dBi 2.4/5.8Ghz wifi radio for extra range. Uses one USB slot. ($25 additional). More specifications: Hardware: 1 x Orange Pi Zero Plus 2, Quad Core 64bit H5 Processor, 512MB RAM, 8GB eMMC flash storage Internal Storage: Highly reliable embedded 8GB eMMc flash memoryExternal Storage: TF card slot supports up to 128GB cards. MicroSD card is NOT included. Operating System: Ubuntu 20 (latest version)Power Supply: 1 x Micro USB includedPower draw: 1 amp @ 5v max. CPU has active power management. Case Dimensions: 2" x 2" x 1.7" (51mm x 51mm x 43mm)Weight: 1.85oz (52 grams) Fast Shipping from U.S. Buy now and receive your order in days! We are selling our U.S. based inventory of these devices ready for immediate shipment. Bulk volume pricing and combined shipping discount is also available. Contact us! What's the Orange Pi Zero Plus2It's an open-source single-board computer offering a high performance Quad Core 64bit CPU, 512MB SDRAM and 8GB onboard flash storage in a very compact package. An externally accessible TF card slot for removable storage, onboard 2.4Ghz WiFi and HDMI video make it very convenient platform for OctoPrint. Simply attach a HDMI monitor and USB keyboard into the device to access the console. The device is powered by a micro USB power supply (included). CPU H5: Quad-core Cortex-A53 GPU H5: Mali450 GPU Memory (SDRAM) 512MB DDR3 (shared with GPU) Onboard Storage TF card (Max. 32GB) /eMMC flash(8GB) Onboard Wireless AP6212 IEEE 802.11 b/g/n, Bluetooth 4.2 Video Input CSI input connector Camera Supports 8-bit YUV422 CMOS sensor interface Supports CCIR656 protocol for NTSC and PAL Supports SM pixel camera sensor Supports video capture solution up to 1080p@30fps Video Outputs Supports HDMI output with HDCP Supports HDMI CEC Supports HDMI 30 function Power Source USB OTG can supply power GPIO(1x3) pin UART, ground. Low-level peripherals 26 Pins Header,compatible with Raspberry Pi B+ 13 Pins Header,with 2x USB, IR pin, AUDIO(MIC, AV) LED Power led & Status led Orange Pi is a trademark of the Shenzhen Xunlong Software CO., Limited.
Price: 199 USD
Location: Windermere, Florida
End Time: 2024-02-04T03:29:59.000Z
Shipping Cost: N/A USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 14 Days
Refund will be given as: Money back or replacement (buyer's choice)
Model: Octopi Octoprint
Custom Bundle: Yes
Compatible Brand: For Dremel, For Flashforge, For Formlabs, For LulzBot, For MakerBot, For Monoprice, For Ultimaker, Universal
Onboard WIFI+BT: AP6212
Memory(SDRAM): 512MB DDR3
Modified Item: No
CPU: Quad-core Cortex-A53
Onboard Storage: microSD to 64GB / Onboard 8GB eMMC Flash
Model Number: OctoPrint
Type: Controller Kit
GPU: Mali 450 MP4
UPC: Does not apply
Compatible Model: For 3D Systems CubePro, For 3D Systems ProJet 1200, For Airwolf 3D AXIOM, For Airwolf 3D AXIOM Dual Extruder, For Airwolf 3D AXIOMe, For Anet A8, For B9Creations B9Creator, For BEEVERYCREATIVE BEEINSCHOOL, For BEEVERYCREATIVE BEETHEFIRST, For BEEVERYCREATIVE BEETHEFIRST+
Platform: Orange Pi Zero Plus 2
MPN: Octopi Octoprint
Brand: OctoPrint
Bundle Description: Fully assembled with optional pre-installed operating system
