OPT7 Aura PRO Bluetooth 4pc LED Lighting Kit for Boat

Description: Built Tough. Built for the Marine. AURA flexible strips made with strong IP67 water-resistant, dust-proof material, completely silicone sealed and well-functioned under temperature - 40F to 185F. Hold on tight with adhesive tapes and zip ties provided. It ain’t going anywhere! IMPORTANT: The LED connectors are not waterproof. You will need to use heat shrink tube or electrical tape around the LED connectors to ensure the longevity of the lighting kit. OPT7 Connect APP Proprietary Scalable Technology! Our custom build one means weve got a ton of features that you will benefit from as we update the app and our control box has been engineered to handle that ahead of time. Presets: Save up to 3 favorite colors on Solid, Strobe, Color Fade modes Multi-color selections Brightness dimming selections On the OPT7 Connect APP, our modes are: Solid, Strobe, Multi-Color Fade, Multi-Color Cycle, SoundSync Door-Assist-Entry: To use this feature, you must connect the AUX wire on the control box, check manual for more details, it will allow the lights to light up upon door opening. Hear It, See It, Feel It with SoundSync When the beat drops and youre lost in the moment, your heart wont be the only thing racing. Sound Sync illuminates the music with finely tuned bass-activated technology. Its time to experience your music in a whole new light. Aura Pro Bluetooth Kit Includes: 1 x Aura Pro Control Box 2 x Y-Splitters 4 x 2 ft LED Strips with Adhesive Back (8 ft in total) 4 x 13 ft Extension Wires 1 x 10 ft In-line Fuse Hardwire Power Harness 1 x Pack of Mounting Kit and Zip Ties NOTE: This product is intended to be connected as is, you may add our expansion kits; however, it should not exceed more than 1 AURA kit + 1 AURA Expansion kit. 4pc 4-inch Single Row Expansion kit 2pc 12-inch Single Row Expansion kit Strong Adhesive Tape Our premium strip kits use strong binding tape for a lasting hold you can trust. Tips on applying adhesive LED strips securely: 1. To prep the area you wish to mount the LED Strip. Wash the installation point with warm water, then wipe it dry. 2. Dampen a clean cloth in warm water, then scrub the surface to remove debris. Any grime left behind could prevent the LEDs from sticking, so thoroughly clean the surface until it’s free of dirt and scuff marks. 3. Remove any moisture left over with a clean, dry cloth or give the surface 30 minutes to air dry. Next, use the adhesive booster that we provide to wipe the area for a ready to stick surface. 4. Peel the adhesive backing off and press the LEDs in place. LED lights are like stickers, so wait until you’re ready to put them on the wall before pulling the backing off. It’s best to do this a little at a time. Start at one end of the surface, peeling the backing off of the initial LED light. Position it, press it flat by hand, then continue placing the rest of the strip. Take your time. Make sure the LEDs are in the right place so you don’t have to move them later. Powered by SoldEazy [Datacaciques code end]

Price: 66.39 USD

Location: Fremont, California

End Time: 2024-08-20T01:59:18.000Z

Shipping Cost: 0 USD