PARTS 1967 Nagano Keiki Seisakusho Mechanical Engine Pressure Indicator M3 Vtg

Description: FOR PARTS 1967 Nagano Keiki Seisakusho Mechanical Engine Pressure Indicator M3 Vtg There are 50 photos of the item below. ---The photos load incrementally below depending on your connection, please allow a few seconds for the photos to appear --- Working condition is unknown, sold for parts or as a collectible. NOTE that the wood case as well as the internal wood braces/dividers/etc have become completely DETACHED (the entire box bottom is detached, it had been glued originally so there is nothing broken), also the two felt covered concave braces are detached, you can see in the photos where I have everything laid out that is separated and detached. Some of the corners of the wood case frame have some signs of separating but press back together, I assume if the box bottom was re-attached it would eliminate that problem. Also NOTE that the entire exterior of the wood case was very dirty/greasy to the touch (as will be the interior edges of the lid and case bottom as well as other wood parts inside, I had just wiped the exterior for handling and storage). --- The wood case does not have a key. The red plastic handle has a big chip as shown. Some paint stains seen on the case exterior. --- I found a pdf from the company that describes this indicator in detail including cross section parts diagrams. Note that this is NOT a Maximum pressure indicator (the company makes those, they would have a gauge), my understanding is that this is a chart recorder type indicator where a metal needle inscribes the metal chart paper wrapped around the side cylinder (the included chart paper looks trashed to me so I don't know if any of that could be used). Here is the pdf (you will need to copy and past the entire address into your browser window): https://products.naganokeiki.co.jp/userfiles/files/products/MM20%E3%83%BB30/E-MM20_30_H_4P20190128f.pdf ---- The pdf describes operation and construction in detail. I don't know what the internal condition of this unit, NOTE the small clear plastic tube that is filled with some TINY parts like screws etc (they look like watch parts). There were a few parts I show outside of the box and appear to be part of the chart recorder part (but I'm not sure). --- The wood case would have originally had rubber feet (that's what those screws are on the bottom of the case). The case measures 9.5" x 6" x 5". This will fit in a USPS Medium Flat Rate box, but with only about 1/4" to spare on the top and bottom, I'll go with that method and will use a rigid panel for the top and bottom that will be supported by vertical sheet foam frame, and there will still be a small bubble wrap layer), the weight is 7 lbs so going with this method will save on costs, over the years I've packed many fragile/heavy items like this and pack so the shipping box can be tossed onto concrete with no concerns. --- See photos for condition details. --- Will be well packed --- See shipping options above--- Payment expected within 3 days of purchase (contact me if you need more time). --- The item description is guaranteed to be accurate but all items are sold as-is unless otherwise stated.--- I don't have a way to arrange for a local pick-up of this item, I'm sorry for the inconvenience

Price: 174.99 USD

Location: Everett, Washington

End Time: 2024-12-18T00:01:31.000Z

Shipping Cost: 19.3 USD