Description: I have for your consideration this 50 Ohm Impedance, Pi Resistive Attenuator. The attenuator will come with all resistors needed to set the attenuation to 3dB, 6dB, 9dB, or 12dB. Please send me a message after you purchase the product and specify the level of attenuation desired. The proper resistors will be soldered to the board and the other resistors will be included separately and can be substituted by the purchaser as needed (de-soldering of the 3 soldered resistors and re-soldering of the included resistors is required). Follow the table on the back of the pcb for value and location of the resistors for desired attenuation. (Note: as shown in the first picture, the input side of the attenuator is next to the 49.9 ohm resistor and the output side is next to the 0.1uF capacitor) This attenuator has been designed primarily for use with a 10MHz GPSDO, reference source, or distribution amplifier, but can be used for any 50 ohm impedance signal. Please note, if no message is received within 24 hours of purchase, the attenuator will be shipped with no resistors soldered to the pcb and the purchaser will be required to solder them after receiving the product. Please feel free to contact me with any questions.
Price: 16.99 USD
Location: Livonia, New York
End Time: 2024-12-08T05:19:52.000Z
Shipping Cost: N/A USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Brand: Unbranded
Compatible Brand: Universal
Type: Attenuator
Connectivity: SMA
To Fit: GPSDO, Distribution Amplifier
