Description: You are looking at: (sample photo of a gallon) AP8099 E-Z Grip Plastic Adhesion Promoter (quart) AP-8099 E-Z Grip Plastic Adhesion Promoter is a clear adhesion promoter for polyolefin or non-polyolefin unprimed automotive plastic parts. When combined with the proper surface preparation, this product enhances the adhesion performance of base coat and single stage finishes on unprimed automotive plastic parts. Application Surface Preparation Wash the area thoroughly with soap and water to remove contaminants that solvent-based cleaners cannot remove effectively. Clean area with a good grade wax and grease remover and wipe dry with a clean cloth. Once properly cleaned, the plastic part should not have any gloss and should not feel slick. If it does, re-clean with wax and grease remover. Completely sand surface with 1200 grit or finer sandpaper and re-clean with wax and grease remover to remove sanding residue. Wipe area with tack cloth to remove any dust or dirt particles. Mixing Directions Ready to Spray. Application Apply one medium coat of AP-8099 E-Z Grip Plastic Adhesion Promoter immediately after cleaning the plastic with wax and grease remover. Allow AP-8099 to air dry 20 – 30 minutes before applying sealer. Follow sealer manufacturer’s application and dry instructions. Topcoat with base coat / clear coat, or single stage finishes as instructed by manufacturers technical data sheets. Note: For difficult to clean and textured plastics, temper the substrate for 30 minutes at 140’F after cleaning and sanding. This may be helpful in driving out further mold release agents. Do not sand after tempering. .Use 30 –45 psi at the gun or 6-10 psi at the cap when using an HVLP gun. The surface should have a wet and uniform finish. Allow AP-8099 E-Z Grip Plastic Adhesion Promoter to dry 20 - 30 minutes before top coating. Do not apply over body filler or lacquer based products. For Further Questions Please Contact Us Via Ebay Messages Please check out our on line store for Paint 'N' More.... Abrasives Acrylic Enamel Paint Adhesives and Sealants Acrylic Enamel Paint Kits Auto Body Supplies Catalysts & Hardeners Clips & Fasteners Decals Detailing Products Enamel Clear Coats Enamel Primer Body Fillers & Putties Lacquer Clear Coat Lacquer Paint Marine Paint Lacquer Primer Misc. Items Reducers Sherwin Williams Urethane Base Coat Kits Tools Urethane Base Coat Urethane Clear Coat Urethane Primers Urethane Single Stage Vinyl & Plastic Paints Urethane Single Stage Kits
Price: 30.75 USD
Location: Mount Vernon, New York
End Time: 2024-09-24T20:39:41.000Z
Shipping Cost: 15 USD
Product Images
Item Specifics
Returns Accepted: ReturnsNotAccepted
Return policy details:
Manufacturer Part Number: AP8099-4
Country/Region of Manufacture: United States
Brand: Autobahn
Type: Adhesion Promoter
Warranty: No Warranty
