Polarstar Patriot edition Fusion engine Airsoft gun Setup *Read description*

Description: *Airsoft Replica not a real gun* This is going to be a long read. I have regrettably decided to part ways with My Polarstar build. I Bought this Patriot edition Brand new in 2014 From Amped airsoft in Pittsburg PA. I spent around a year building it how I wanted and adding parts that I liked. The gun how you see it is in its final form. (It had a surefire light that has since been removed) The gun was a pretty expensive build back in 2014-2015 with all the top of the line parts or what I understood to be the best parts at the time.. opinions vary. Ok so lets get down to whats on and in the gun. The polarstar fusion engine is a 1 of 100 Patriot edition #12 of 100. The fusion engine is inside of a VFC/Noveske body with a noveske rail. The barel setup is a 363mm Orga 6.23 widebore barel with a Prowin hop up chamber and a prommy purple bucking and a flat hop up nub (Could be wrong on the bucking and nub it might be the stock prommy nub I cant remember) A knock off eotech (the hinge part is a little flimsy) All the parts included are as follows and everything you see in the pictures. Patriot edition fusion engine VFC body Noveske amplifier Suppressor Condour sling Redline firebase regulator Newer V3 FCU for the fusion engine Amped airsoft Grip line Amped airsoft line from regulator to the gun 2 7.4 lipos. Pelican 1600 hard storage case Knock off eotech sight 4 Hexmag 120rd midcap magazines Magpul AFG Cat engineering flexible wire harness Red popet installed (I think.. might be gold) Odin innovations speed loader Also included but not pictured will be in the case under a layer or two of foam...The gun also comes with 1 red nozzle and 2 blue nozzles (blue nozzles in the case not pictured. Tech T gun sav, spare fcu (Wire broke off will need sodiered on) Spare wire harness, Stock g&g hop up chamber with stock bucking, Stock black poppet. Spare flat nub, spare prommy purple nub. Please note I have not used this gun in roughly 5 years. I relubed the nozzle and poppet. And the gun functioned. Im not sure if the setting in the fcu are tuned perfectly so It may need adjusted some. The case also has stickers as you can see but they should come off and the residue should come off with some alcohol. If you have any questions or concerns please reach out. I can also ship but i would prefer local pickup or I can meet within a few hours of 21550. please ask we can set up a deal.

Price: 1850 USD

Location: Oakland, Maryland

End Time: 2024-02-02T18:39:18.000Z

Shipping Cost: N/A USD