Description: FAST TURNAROUND All items in stock are dispatched within 1 business day. WORLDWIDE SHIPPING We ship to any country in the world. PROUDLY AUSTRALIAN Owned and Operated. Store Categories Store Categories Voron 0 Voron 1.8 Voron 2.4 Voron Trident Kits Frames Printed Parts Fasteners Fastener Kits High Tensile Bolts Stainless Bolts Nuts and Washers ABS Panels Lubricants Electrical & Electronics Power Supply Motors Extruder & Hotend Bearings Magnets Pulleys Belts Filament Tools Bondtech Nozzles Buildplate Phaetus Engineer Eight Tool LDO Fans BIGTREETECH Motion Linear Rails Shop All PolyMaker PolyLite ASA Filament - Red 1kg - 1.75mm Features: UV Resistant With excellent weather resistance (UV, water and heat) PolyLite™ ASA is the ideal choice for printing parts that must survive in the harsh outdoors. Most plastics tend to become brittle and their colour turns yellow when exposed to UV radiation or sunshine but with PolyLite™ ASA the appearance and mechanical properties of your 3D prints are not influenced negatively by UV light. Water Resistant PolyLite™ ASA is resistant to Environmental Stress Cracking (ESC). This allows printed parts to face the outdoors, high humidity and rain over long periods of time. ABS Alternative PolyLite™ ASA performs better in both thermal and mechanical properties compared with general ABS filaments. It also features a Vicat softening temperature of 105Ԩ which slightly exceeds ABS. Excellent Printing Quality PolyLite™ ASA prints parts with a beautiful matte surface finish, suitable for printing production parts. Made with only the highest quality materials, PolyLite™ ASA delivers excellent printing quality and reliability. Uncompromised Quality With Polymakers industry leading quality control process and rigorous in-house testing, you can rest assured that PolyLite™ ASA will produce beautiful, reliable and accurate printed parts. Specifications: Print Settings Nozzle Temperature: 240˚C – 260˚C Printing Speed: 30mm/s – 50mm/s Bed Temperature: 75˚C – 95˚C Bed Surface: BuildTak® Cooling Fan: OFF Other: When printing with PolyLite™ ASA it is recommended to use an enclosure. For large part it is recommended to use a heated chamber. Note: Printing conditions may vary with different printers and nozzle diameters Mechanical Properties (X-Y) Young’s Modulus: 2379 ± 157 (MPa) Tensile Strength: 43.8 ± 0.8 (MPa) Bending Strength: 73.4 ± 2.1 (MPa) Charpy Impact Strength: 10.3 ± 0.4 (kJ/m2) Thermal Properties Glass Transition Temperature: 97.8 (°C) Heat Deflection Temperature (0.45 MPa): 102.6˚C Heat Deflection Temperature (1.8 MPa): 100.2˚C Vicat Softening Temperature: 105.3˚C Notes Density: 1.13 g/cm3 See Safety Data Sheets Disclaimer: The typical values presented in Polymakers data sheet are intended for reference and comparison purposes only. Due to the nature of 3D printing they should not be used for design specifications or quality control purposes. Storage: It is recommended to store PolyLite™ ASA in the PolyBox™ to prevent moisture absorption which will lower the quality and the mechanical properties of the print. If the filament has absorbed moisture it can be dried at 70˚C for 6 hours in a convection oven.
Price: 33 AUD
Location: Bentleigh
End Time: 2025-01-08T08:37:05.000Z
Shipping Cost: 19.08 AUD
Product Images
Item Specifics
Returns Accepted: ReturnsNotAccepted
Filament Type: ASA
Colours: Red
Size: 1kg
Brand: Does not apply
Type: Does not apply
