Revere

Precision Tube tester Model 10-20

Description: Precision 10-20 Tube and Set tester I partly restored this unit for my use. I did not restore the VOM part of the unit I have accumulated some documentation while I used the tester and I will include them.A detailed operating instruction which includes a schematic for the Model 10-20/10-22 tester.Also included is a tube setup data sheet that includes tubes not on the roll chart. A Tube Test Data for Roll Chart F2P the roll chart in the unit. A supplementary tube data chart for special and foreign type. An article by Bob Putnak that discusses the repair and calibration of the Precision 10-12 Tube tester. The 10-12 and the 10-20 are pretty much the same except the 10-20 has the VOM circuit included. Go to Bob's web site for more detail for the repair and calibration. I have included some pictures which show some marks on the wooden case. The unit is dusty as it has been setting on the shelf unused for a few years so I need to let it go. The Precision 10-20 is pretty simple I think to use and it goes pretty fast when checking multi tubes. The unit will need some cleaning, dusty, etc. Some of the buttons stick when pushing down but pop up okay when released. I enjoyed getting this tester to the point that it would work for me. I hope you can make this unit work for you, if not then do not buy it. Some of the carriers are a little rough so plan on opening it up to make sure things are in place. Due to some buyers actions I can not accept returns on this item. If you bid on this item then you must agree to this condition, thanks for understanding. I also claim the right to refuse any bids I think are questionable. Buyer pays all shipping charges.

Price: 300 USD

Location: Bronson, Texas

End Time: 2024-08-17T17:27:41.000Z

Shipping Cost: N/A USD

Product Images

Precision Tube tester Model 10-20Precision Tube tester Model 10-20Precision Tube tester Model 10-20Precision Tube tester Model 10-20Precision Tube tester Model 10-20Precision Tube tester Model 10-20Precision Tube tester Model 10-20Precision Tube tester Model 10-20Precision Tube tester Model 10-20Precision Tube tester Model 10-20Precision Tube tester Model 10-20Precision Tube tester Model 10-20Precision Tube tester Model 10-20

Item Specifics

All returns accepted: ReturnsNotAccepted

Model: Precesion 10-20 tube tester

Recommended

Precision Tube Tester 10-60 Operating Instructions
Precision Tube Tester 10-60 Operating Instructions

$9.99

View Details
Lubricant Launcher Tube Lube Applicator Injector Precision Markings Reusable
Lubricant Launcher Tube Lube Applicator Injector Precision Markings Reusable

$10.49

View Details
Precision Tube Test Data for 910 912 914 915 920 922 954 Tube Testers
Precision Tube Test Data for 910 912 914 915 920 922 954 Tube Testers

$9.99

View Details
Lee Precision 90006 Resizing Lube 1 Tube
Lee Precision 90006 Resizing Lube 1 Tube

$9.99

View Details
High Strength Dielectric Grease TuneUp Lube Electrical Precision Tip 3 pack tube
High Strength Dielectric Grease TuneUp Lube Electrical Precision Tip 3 pack tube

$9.11

View Details
Kaw Valley Precision Browning Invector 12ga Choke Tube - Skeet - 0.720"
Kaw Valley Precision Browning Invector 12ga Choke Tube - Skeet - 0.720"

$29.95

View Details
Series 920 Electronamic Tube and Set Tester Precision Apparatus Company
Series 920 Electronamic Tube and Set Tester Precision Apparatus Company

$50.00

View Details
Rebuild Kit for Paco 10-54 or Precision Tube Tester Full Recap Capacitor Set
Rebuild Kit for Paco 10-54 or Precision Tube Tester Full Recap Capacitor Set

$3.00

View Details
ROCTEC 500 MIXING TUBE 4” LONG 300766-030 A Set Of 5 Mixing Tube Offset .030,
ROCTEC 500 MIXING TUBE 4” LONG 300766-030 A Set Of 5 Mixing Tube Offset .030,

$500.00

View Details
VINTAGE Precision Electronics Tube Amplifier Microphone Mixer G-42 7668 Power
VINTAGE Precision Electronics Tube Amplifier Microphone Mixer G-42 7668 Power

$200.00

View Details