Description: Store New Arrivals Add to Favorite View Feedback Contact Primochill Ice - Low-Conductive Computer Watercooling Fluid (32 Oz.) - UV Pink Description Item model number PC-ICE2-UPK Item Dimensions LxWxH 8.68 x 0.55 x 0.55 inches Color UV Pink Product Dimensions 8.68 x 0.55 x 0.55 inches Material Pvc,Copper,Acrylic,Glass,Nickel,Rubber Compatible Devices Desktop Item Weight 2.29 pounds Voltage 12 Volts Cooling Method Water Is Discontinued By Manufacturer No Brand PrimoChill Manufacturer PrimoChill Repeatable chemistry for Identical colors every timePre-measured and pre-colored. Ready to add to your system.OK to use with all rubber gaskets, acrylic tubing, pvc tubing, petg tubing, glass tubing, as well as nickel and copper components Product Description Step 1 - Prepping Radiators Radiators can often times be the most needed component for prepping. We recommend using our RadClean (not included) solution for a a clean and ready radiator. Step 2 - Initial Cycling and Flushing Sys Prep (not included) is recommended to properly cycle your system and make sure all your components are clean of machinery oils, loose debris, and other substances that may kill your PC Ice. Step 3 - Cleaning old fluid out System Reboot (not included) was created to pull old dyes and fluid out of existing PC builds. This is essential to use if you had any other previous fluids in your build that you plan to use PC Ice in. Step 4 - Add your final PC ICE After going through all the proper prepping (follow our guide) you're ready to add your PC Ice! PC Ice Difficulty Expert Intermediate Intermediate Beginner Beginner Fluid Type Show Fluid (performance properties) Performance Fluid Performance Fluid Performance Fluid Performance Fluid Available Colors 25 25 25 13 13 Recommended for Daily Use ✓ ✓ ✓ ✓ Conductivity Low Low Low Low Low Water Based ✓ ✓ ✓ ✓ ✓ PC Ice Important Information Preparation We recommend a thorough cleaning of all tubing and system components prior to priming your system with ANY fluid. Flushing your system with Sys Prep (not included) is recommended to remove any particles as well as any residual that may exist from previous build or the tubing manufacturing process and balances PH level in your loop. This is the driving force behind the stability and vibrancy of your color. Every system is different and will have varying starting PH levels. The longer you run the SysPrep mixture in your system the better the results will be! Some systems are balanced after only a few hours while in rare cases others may take days to achieve this. Low-Conductivity As with all Low-Conductive fluids, PC ICE can become conductive if it comes in contact with excessive dust or other fluids that may be conductive. The Low-Conductive aspect of PC Ice is used as a safety measure only. It is always a good idea to keep your system clean and free of dust, especially in a water cooled system. Recommend: Pre-treat your system with Sys Prep (not included) to achieve a clean loop and to ensure optimal non-conductive results. Maintenance As with all custom loop water-cooling, continual maintenance and frequent inspection is required. ICE will need to be replaced every 6 months, depending on the complexity and conditions of your loop this time frame may vary. Compatibility Use of this product with aluminum components (such as aluminum constructed radiators) is STRONGLY DISCOURAGED. PrimoChill will not support or replace fluids used with an aluminum radiator. Do not mix ANY additional additives, coolants or silver coils with ICE. This will change the formulation of ICE which can cause the fluid to solidify or break apart. Known incompatible radiators include but NOT limited to: Thermaltake RL Series - Radiators and EK Aluminum Kits. Staining The use of any colored fluids WILL ABSOLUTELY stain your components in your cooling loop including rigid and flexible tubing, acrylic reservoirs, and blocks. Prolonged use will cause permanent staining of your components. Severity of staining will be based on the color. Use of this product is at your own risk. PrimoChill will not replace stained components. Color Loss During the initial application of ICE, the product may change/lose its original color when added to your loop within the first 24-48 hours. This is a common, well known occurrence. If this happens to your system, immediately drain and flush it out with DI or Distilled water. Once the system has been drained and cleaned, refill your system with ICE fluid once again. ICE will over time help neutralize your cooling loop, which will then stabilize the color. High Pressure Systems The combination of high pressure loops and micro-channel water blocks will accelerate the breakdown of ICE coolant. We STRONGLY recommend using a pressure relief valve in every water-cooling loop. PrimoChill is not responsible for any hardware damage. Use at your own risk. ABOUT US We offer the best prices around on high quality products. Our E-store includes media such as books, movies, music and games while offering electronics, toys, sporting apparel, clothing, tools, general home, garden items and more. SHIPPING We are always working hard to ensure your package arrives as soon as possible. Please understand that some factors like weather, high postal traffic, and the performance of shipping companies are outside of our control. We offer free shipping to the lower 48 states and ship within 2 business days of payment, usually sooner. We do not accept P.O. Boxes. Please provide a physical address. RETURNS We offer a 30-Day Return Policy on items which you are not completely satisfied with. You have the option for a full-refund or an exchange of the item. No returns are available on items shipped outside of the USA. PAYMENT We accept PayPal. CONTACT US This page content is yet to come Please ad us to your favorite seller and visit again later Thank You CUSTOMER SATISFACTION We try our very best to make sure every customer is completely satisfied. If theres a problem, message us! Were happy to help.
Price: 50.9 USD
Location: Denver, Colorado
End Time: 2024-12-31T09:57:41.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Brand: PrimoChill
Type: Does not apply
Item model number: PC-ICE2-UPK
Item Dimensions LxWxH: 8.68 x 0.55 x 0.55 inches
Color: UV Pink
Product Dimensions: 8.68 x 0.55 x 0.55 inches
Material: Pvc,Copper,Acrylic,Glass,Nickel,Rubber
Compatible Devices: Desktop
Item Weight: 2.29 pounds
Voltage: 12 Volts
Cooling Method: Water
Is Discontinued By Manufacturer: No
Manufacturer: PrimoChill