Description: Only 1 LED lights at a time Battery Condition Indicator -Marine Trolling Motor, Solar System, Forklift or other 48 volt DC battery powered equipment. For use on any equipment where the battery status is important. It is specifically designed for standard lead acid batteries and will not work on the newer batteries made by Trojan, Exide, Interstate, Powertron or Walmart. For those batteries, you will need to purchase a PRO12-48R (TM) battery monitor. Some mechanical aptitude is needed to make the installation. If you are not capable of finding an appropriate voltage supply, you may need to seek the help of a professional for installation. The only available instructions are provided below. Battery Status The battery meter has 10 LEDS that will light to show the battery condition. When fully charged, only the 10th LED will light shown a green LED. As the battery discharges, successively lower LEDs will light; the 9th, 8th, 7th and so on lighting only 1 LED. At approximately 30% battery life, the #3 LED will light and the color is Yellow as a caution indicator. At approximately 20% battery life remaining, the #2 LED will light as a Flashing Yellow. When the battery discharges to approximately ~10% remaining life, the #1 LED will start FLASHING RED with the #2 LED FLASHING Yellow alternately. It is recommended to have the battery or batteries recharged when the #3 LED lights Yellow as a safety margin to prevent dead batteries. CAUTION: CAUTION: This is not a full proof device and no warranty is made that your battery/batteries is/are in good condition. Reading 10 LEDs, #10 being fully charged and #1 being fully discharged Voltage Indicator Range for Solar Systems, Golf Carts, Fork Lift Trucks and other battery powered equipment. 49.31 volts full; 41.52 volts Empty Weight 2 Ounces Voltage Supply 48 Volts DC Temperature Range -40 to 185 Fahrenheit; -40C to 85C Power Consumption 0.2 to 0.3 Watts Dimensions Width 2.125" Depth Behind front meter flange to end of mounting screws - 1 15/16 inches Hole size - 1 3/8 " wide by 15/16" Installation Connections The terminal marked "+" is for positive volts. The terminal marked "-" is for ground. These must be hooked up for the indicator to record battery usage. With only these two terminals hooked up, there will be no display showing. This is done to conserve battery power, but the meter is monitoring the batteries. When you want to see the display, connect the terminal marked "C" to a positive volt source (+ and - terminals should still be connected). "C" can be hard wired to have the display showing all of the time or can be used through a momentary contact switch to see the battery status by depressing the momentary contact switch. Another method for installation would be to connect "C" to a terminal coming from a switch key that goes hot when the key is turned on. Remember that + and - must always be connected. NOTE: For the meter to be reset to full, it is necessary that the meter sees the charging voltage for as little as 1/2 second. If you have your meter hooked up only from a switched source for both the + and "C" terminal, you must switch this on during the recharge cycle for less than 1 second to reset the meter. We ship meters within 24 hours of payment or next business day. Warranty: Hour meters are warranted for a period of 3 months from the date of sale.
Price: 13.95 USD
Location: West Grove, Pennsylvania
End Time: 2025-01-09T01:04:07.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Seller
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Number of Items in Set: 1
Non-Domestic Product: No
Custom Bundle: No
Color: Black
Material: Plastic
MPN: PRO48FRC
Modified Item: No
Brand: ProPower
Type: Battery Charge Level Indicator
Model: PRO48FRC
Features: Water Resistant
Country/Region of Manufacture: China
Sport/Activity: Golf
