PT2262 RF ASK Control RF Wireless Receiver 433.92MHz AC220V

Description: Product Description For Arduino Sample code PT2262 RF ASK Control RF Wireless Receiver 433.92MHz AC220V Spare transmitter : https://www.ebay.com/itm/SC2262-PT2262-PT2264-433MHZ-ASK-OOK-Encoders-RF-Wireless-Transmitter-Modules-/281040355304?pt=LH_DefaultDomain_0&hash=item416f4f7fe8 , Modules No: YC056 ; QTY: 4pcs 1Channel receiver contrller and 1 pcs 4 channels transmitter . Receiver : Connection : Technical indicators: 1.operating voltage: AC220V ; Operating frequency: 433.92MHz; Receiver sensitivity:-95dB; Encoding: Receiver Recording; Momentary / Latch / Toggle selectable (defult is Momentary , Latch Mode need 2 buttons handsender ); Output mode : Relay switch; Receiver size: 62 * 35 * 22 mm; Max load : 500W; Advantage : 1: Receiver Mother board have a learning key , if the remote is lost , must buy EV1527 remotes to re-learn; Work mode (programmable ) singnal Inter-locking (Latch) singnal Self-locking (Toggle) singnal Non-locking (Momentary is defult ) Program steps : 1: keep pressing learning key on the receiver controller , LED turn on after 2 second , then turn off after 4 second, then the receiver controller enter programming state , but not release the finger , still keep pressing the learning button , LED blink once after 2 second , release the finger on learing key , it is Momentary mode , or still keep pressing learing key , LED blink twice after 2 second , release the finger on learing key , it is Toggle mode , or still keep pressing learing key , LED blink 3 times after 2 second , release the finger on learing key , it is Latch mode , Learning method and steps Keep pressing learnig key on receiver controller board , LED turn on after 2 seconds , release the finger on learning key , press the key on remote , work state LED blink 3 times , it means learnig successfully ; Clear the deposit information Keep pressing learnig key on receiver controller board , LED turn on after 2 seconds , then turn off after 4 seconds , it means clearing successfully . Relay mode : Normally close (NC ) ; Normally open (NO ) ; Normally-open (NO) contacts connect the circuit when the relay is activated; the circuit is disconnected when the relay is inactive. It is also called aForm Acontact or "make" contact.NOcontacts may also be distinguished as "early-make" orNOEM, which means that the contacts close before the button or switch is fully engaged. Normally-closed (NC) contacts disconnect the circuit when the relay is activated; the circuit is connected when the relay is inactive. It is also called aForm Bcontact or "break" contact.NCcontacts may also be distinguished as "late-break" orNCLB, which means that the contacts stay closed until the button or switch is fully disengaged. Transmitter Remote: Model No. TB195 Encoder Transmitter Function discription Encoder Transmitter modules Operating voltage 3V ~ 12V DC Static current max≤8mA(12V)， min≤2mA(3V) Operating frequency 433MHz modulation Mode ASK/OOK SAW Frequency stability ±150kHz(max) Transmitter Power 50mW (315MHz, 12V) Data rate ≤10Kbps Antenns length 24 cm (315 MHz), 18 cm (433.92 MHz) Dimension 36 * 27mm Encodeing format PT2264 fixing code (same as PT2262 SC2262 ) ，Work with PT2272 decoder IC Transmitter distance 300-500M (open area)

Price: 28.55 USD

Location: Guangzhou

End Time: 2025-01-06T05:15:58.000Z

Shipping Cost: 2.99 USD