Pump Grip — "Subduction" (PETG) for Dart Zone Max Stryker

Description: The most stable pump grip you can get for the Dart Zone Max Stryker! This pump grip allows for more comfortable and smooth priming of the blaster. It attaches directly to the priming slide tabs and NOT to the picatinny rail piece underneath the stock grip. This results in a much sturdier grip with less wobble than any of the picatinny-mounting grip options out there for this blaster. The Subduction style is a nice shotgun-esque pump grip with a slightly rounded front end. Includes: 1x Dart Zone Max Stryker Pump Grip, 1x Grip Core, 2x M5x45mm hex bolts, 2x M5 nuts Installation: Remove the stock priming grip and remove the picatinny rail attachment that was underneath the grip as well. Pop the two core pieces onto the blasters priming tabs (left piece on the left, right piece on the right. Then slide the pump grip onto the blaster on the core and line up the bolt holes. Once both screw holes are aligned, thread the bolts through the grip and core (bolt head is on the left side, nut is on the right side). Attribution: Designed by Transmogrification Labs. Notes about material: This product is printed in PETG material which offers superior thermal resistance and increased durability compared to PLA products. PETG has a higher glass transition temperature of 80°C whereas PLA is 60-65°C. For PLA, this is within range of the temperatures that often occur inside a vehicle during summertime so items made from PLA may end up warping in those situations. The same issue can possibly occur from exposure to direct sunlight if the temperature is high enough. PETG has a much higher glass transition temperature however so you are very unlikely to ever experience issues with it warping in addition to it just being stronger in general. PETG products do come at a higher cost than the same product in PLA because PETG takes longer to print and also requires more time to clean up after printing but the result is a very high-quality product. Disclaimer: All of my products are printed and tested with the utmost attention to detail. Despite this, I am NOT responsible for any damage incurred to you or your blasters through the use of any of these parts alone or a combination with others. It is up to you to keep yourself and your blasters in functioning condition. Some prints may have visual imperfections as is common to all 3D printing (especially for PETG). These slight imperfections will not interfere with mechanical function or integrity/strength. Powered by ExportYourStore.com

Price: 29.95 USD

Location: Huntsville, Alabama

End Time: 2024-03-01T01:15:30.000Z

Shipping Cost: N/A USD